| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Show that git format-patch can have a cover letter, include patch
commentary below the three dashes, and notes can also be
included.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
|
|
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the documentation is mostly consistant in the use of "remote
branch" Vs "remote-tracking branch", let's make this distinction explicit
early in the user-manual.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"remote branch" is a branch hosted in a remote repository, while
"remote-tracking branch" is a copy of such branch, hosted locally.
The distinction is subtle when the copy is up-to-date, but rather
fundamental to understand what "git fetch" and "git push" do.
This patch should fix all incorrect usages in Documentation/ directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sn/doc-opt-notation:
Fix {update,checkout}-index usage strings
Put a space between `<' and argument in pack-objects usage string
Remove stray quotes in --pretty and --format documentation
Use parentheses and `...' where appropriate
Fix odd markup in --diff-filter documentation
Use angles for placeholders consistently
|
|
Linus Torvalds wrote:
> The real problem is that maintainers often pick random - and not at
> all stable - points for their development to begin with. They just
> pick some random "this is where Linus -git tree is today", and do
> their development on top of that. THAT is the problem - they are
> unaware that there's some nasty bug in that version.
Maybe they do this because they read it in the Git user-manual.
Fix the manual to give them better guidance.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the anchor name to
Finding-commits-With-given-Content
so that it corresponds to the actual content there.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we use a-b-c for mywork commits in one place, I think it would be
logical to also use a-b-c too in other illustration on this topic.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the release notes "git status" was not mentioned, also shortly explain
the "-dirty" output generated by diff.
Added a paragraph to the "Pitfalls with submodules" section in
user-manual.txt describing new and old behavior of "git status" and "git
diff" for dirty submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
|
|
In the Table of Contents, there is a notable inconsistency:
first there is "GIT Glossary", followed by "Git Quick Reference"
on the very next line.
Running "grep -c" on user-manual.txt, I find 780 occurrrences of
"git", 37 occurrences of "Git", and 9 occurrences of "GIT".
In general, "git" is the preferred spelling, except at the
beginning of a sentence.
Therefore, change "GIT Glossary" to "Git Glossary" for consistency
with the rest of the document.
Looking at the other eight occurrences of "GIT" I found one other
occurrence that should be changed:
* The mention of "StGIT". Looking at the web pages for "Stacked Git"
at http://www.procode.org/stgit, I only saw the spelling "StGit",
except in http://wiki.procode.org/cgi-bin/wiki.cgi/StGIT_Tutorial,
but that page was last updated in 2006.
The other seven occurrences should not be changed:
* Three occurrences were in the output of 'git show-branch' run
on the git.git repository.
* One occurrence was in the output of 'git cat-file'.
* One occurrence was as part of the file name "GIT-VERSION-GEN".
* Two occurrences were in comments in scripts quoted in a description
of Tony Luck's workflow.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a compound word.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent discussion on the list showed some comments in favour of a
stash/pop workflow:
http://marc.info/?l=git&m=124234911423358&w=2
http://marc.info/?l=git&m=124235348327711&w=2
Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also, use `git foo` when it make sense.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
|
|
These days you must explicitly say "git stash save <comment>".
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
tar handles switches with and witout preceding '-', but the
documentation should be consistent nonetheless.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Linux kernel and Emacs are both spelled capitalized
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
work around Python warnings from AsciiDoc
git-svn: Make following parents atomic
|
|
It appears that a reference to an anchor defined as [[anchor-name]] from
another place using <<anchor-name>> syntax, when the anchor name contains
a string "-with-" in its name, triggers these warnings from Python
interpreter.
asciidoc -b docbook -d book user-manual.txt
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
There currently is no reference to "Finding comments with given content",
but for consistency and for futureproofing, the anchor is also updated as
the other ones that are actually used and trigger these warnings.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
User's Manual: remove duplicated url at the end of Appendix B
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rw/maint-typofix:
Fix typos in the documentation.
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The post-update hook, which is required to be enabled in order for
the repository to be accessible over HTTP, is not enabled by
chmod a+x anymore, but instead by dropping the .sample suffix.
This patch emphasizes this change in the release notes (since
I believe this is rather noticeable backwards-incompatible change).
It also adjusts the documentation which still described the old way
and fixes t/t5540-http-push.sh, which was broken for 1.5 month
but apparently noone ever runs this test.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: fix invalid reference to 'mybranch' in user manual
Fix deleting reflog entries from HEAD reflog
reflog test: add more tests for 'reflog delete'
Documentation: rev-list-options: Fix -g paragraph formatting
Conflicts:
Documentation/user-manual.txt
|
|
Signed-off-by: Ivan Stankovic <pokemon@fly.srk.fer.hr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit -a" ignores untracked files and follows all tracked
files, regardless of whether they are listed in .gitignore. So
don't use it to motivate gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since version 1.5.6 "git bisect" doesn't use a "bisect" branch any
more, but the user manual had not been updated to reflect this.
So this patch does that and while at it also adds a few words about
"git bisect skip" and points user to the "git bisect" man page for
more information.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Philip Oakley
Jeremy White
Štěpán Němec
Miklos Vajna
Jeff King
Junio C Hamano
Jonathan Nieder
Matthieu Moy
Luck, Tony
Štěpán Němec
Michael J Gruber
Kirill Smelkov
Jens Lehmann
Ralf Wildenhues
Björn Gustavsson
Felipe Contreras
Ori Avtalion
Thomas Rast
Chris Johnsen
William Pursell
Henrik Austad
Junio C Hamano
Christian Couder
Johannes Sixt
Petr Baudis
Ivan Stankovic
Jonathan Nieder
Abhijit Menon-Sen
Johannes Schindelin