| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previous patch demonstrates a bug where a MIDX's auxiliary object
order can become out of sync with a MIDX bitmap.
This is because of two confounding factors:
- First, the object order is stored in a file which is named according
to the multi-pack index's checksum, and the MIDX does not store the
object order. This means that the object order can change without
altering the checksum.
- But the .rev file is moved into place with finalize_object_file(),
which link(2)'s the file into place instead of renaming it. For us,
that means that a modified .rev file will not be moved into place if
MIDX's checksum was unchanged.
This fix is to force the MIDX's checksum to change when the preferred
pack changes but the set of packs contained in the MIDX does not. In
other words, when the object order changes, the MIDX's checksum needs to
change with it (regardless of whether the MIDX is tracking the same or
different packs).
This prevents a race whereby changing the object order (but not the
packs themselves) enables a reader to see the new .rev file with the old
MIDX, or similarly seeing the new bitmap with the old object order.
But why can't we just stop hardlinking the .rev into place instead
adding additional data to the MIDX? Suppose that's what we did. Then
when we go to generate the new bitmap, we'll load the old MIDX bitmap,
along with the MIDX that it references. That's fine, since the new MIDX
isn't moved into place until after the new bitmap is generated. But the
new object order *has* been moved into place. So we'll read the old
bitmaps in the new order when generating the new bitmap file, meaning
that without this secondary change, bitmap generation itself would
become a victim of the race described here.
This can all be prevented by forcing the MIDX's checksum to change when
the object order does. By embedding the entire object order into the
MIDX, we do just that. That is, the MIDX's checksum will change in
response to any perturbation of the underlying object order. In t5326,
this will cause the MIDX's checksum to update (even without changing the
set of packs in the MIDX), preventing the stale read problem.
Note that this makes it safe to continue to link(2) the MIDX .rev file
into place, since it is now impossible to have a .rev file that is
out-of-sync with the MIDX whose checksum it references. (But we will do
away with MIDX .rev files later in this series anyway, so this is
somewhat of a moot point).
In theory, it is possible to store a "fingerprint" of the full object
order here, so long as that fingerprint changes at least as often as the
full object order does. Some possibilities here include storing the
identity of the preferred pack, along with the mtimes of the
non-preferred packs in a consistent order. But storing a limited part of
the information makes it difficult to reason about whether or not there
are gaps between the two that would cause us to get bitten by this bug
again.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
|
|
Docfix.
* jt/midx-doc-fix:
Doc: no midx and partial clone relation
|
|
Doc mark-up fix.
* tl/midx-docfix:
midx: fix a formatting issue in "multi-pack-index.txt"
|
|
Doc update.
* cw/protocol-v2-doc-fix:
protocol-v2.txt: align delim-pkt spec with usage
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The multi-pack index treats promisor packfiles (that is, packfiles that
have an accompanying .promisor file) the same as other packfiles. Remove
a section in the documentation that seems to indicate otherwise.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a formatting issue in "multi-pack-index.html", corresponding
to the nesting bulleted list of a wrong usage in "multi-pack-index.txt"
and this commit fix the problem.
In ASCIIDOC, it doesn't treat an indented character as the
beginning of a sub-list. If we want to write a nested bulleted list, we
could just use ASTERISK without any DASH like:
"
* Level 1 list item
** Level 2 list item
*** Level 3 list item
** Level 2 list item
* Level 1 list item
** Level 2 list item
* Level 1 list item
"
The DASH can be used for bulleted list too, But the DASH is suggested
only to be used as the marker for the first level because the DASH
doesn’t work well or a best practice for nested lists,
like (dash is as level 2 below):
"
* Level 1 list item
- Level 2 list item
* Level 1 list item
"
ASTERISK is recommanded to use because it works intuitively and clearly
("marker length = nesting level") in nested lists, but the DASH can't.
However, when you want to write a non-nested bulleted lists, DASH works
too, like:
"
- Level 1 list item
- Level 1 list item
- Level 1 list item
"
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we added a new event type to trace2 event stream, we forgot to
raise the format version number, which has been corrected.
* js/trace2-raise-format-version:
trace2: increment event format version
|
|
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current protocol EBNF allows command-request to end with the
capability list, if no command specific arguments follow, but the
protocol requires that after the capability list, there must be a
delim-pkt regardless of the number of command specific arguments. Fixed
the EBNF to match. Both JGit and libgit2's implementation has the
delim-pkt as mandatory. JGit's code is not publicly linkable, but
libgit2 is linked below[1]. As for currently implemented commands on v2
(ls-ref and fetch), the delim packet is already being passed through
[1]: https://github.com/libgit2/libgit2/blob/main/src/transports/git.c
Reported-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* jc/doc-commit-header-continuation-line:
signature-format.txt: explain and illustrate multi-line headers
|
|
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
|
|
A signature attached to a signed commit, and the contents of the
commit that merged a signed tag, are both recorded as a value of an
object header field as a multi-line value, and are subject to the
formatting convention for multi-line values in the headers, with a
leading SP signaling that the rest of the line is a continuation of
the previous line. Most notably, an empty line in such a multi-line
value would result in a line with a sole SP on it.
Examples in the signature-format technical documentation include a
few of these cases but we did not show these otherwise invisible SPs
in the example. These trailing spaces cannot be seen on display or
on paper, and forces the readers to look for them in their editors
or pagers, even if we added them to the document.
Extend the overview section to explain the multi-line value
formatting and highlight these otherwise invisible SPs by inventing
the "a dollar-sign at the end of line that appears after SP merely
signals that there is a SP there, and the dollar-sign itself does
not appear in the real file" notation, inspired by "cat -e" output,
to help readers to learn exactly where such "a single SP that is
originally an empty line" appears in the examples.
Reported-by: Rob Browning <rlb@defaultvalue.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc tweak.
* ew/midx-doc-update:
doc/technical: update note about core.multiPackIndex
|
|
Code cleanup to limit memory consumption and tighten protocol
message parsing.
* jk/reduce-malloc-in-v2-servers:
ls-refs: reject unknown arguments
serve: reject commands used as capabilities
serve: reject bogus v2 "command=ls-refs=foo"
docs/protocol-v2: clarify some ls-refs ref-prefix details
ls-refs: ignore very long ref-prefix counts
serve: drop "keys" strvec
serve: provide "receive" function for session-id capability
serve: provide "receive" function for object-format capability
serve: add "receive" method for v2 capabilities table
serve: return capability "value" from get_capability()
serve: rename is_command() to parse_command()
|
|
MIDX files are used by default since commit 18e449f86b74
(midx: enable core.multiPackIndex by default, 2020-09-25)
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An oddball OPTION_ARGUMENT feature has been removed from the
parse-options API.
* ab/retire-option-argument:
parse-options API: remove OPTION_ARGUMENT feature
difftool: use run_command() API in run_file_diff()
difftool: prepare "diff" cmdline in cmd_difftool()
difftool: prepare "struct child_process" in cmd_difftool()
|
|
Taking advantage of the CGI interface, http-backend has been
updated to enable protocol v2 automatically when the other side
asks for it.
* jk/http-server-protocol-versions:
docs/protocol-v2: point readers transport config discussion
docs/git: discuss server-side config for GIT_PROTOCOL
docs/http-backend: mention v2 protocol
http-backend: handle HTTP_GIT_PROTOCOL CGI variable
t5551: test v2-to-v0 http protocol fallback
|
|
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
|
|
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
|
|
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We've never documented the fact that a client can provide multiple
ref-prefix capabilities. Let's describe the behavior.
We also never discussed the "best effort" nature of the prefixes. The
client side of git.git has always treated them this way, filtering the
result with local patterns. And indeed any client must do this, because
the prefix patterns are not sufficient to express the usual refspecs
(and so for "foo" we ask for "refs/heads/foo", "refs/tags/foo", and so
on).
So this may be considered a change in the spec with respect to client
expectations / requirements, but it's mostly codifying existing
behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
|
|
As was noted in 1a85b49b87a (parse-options: make OPT_ARGUMENT() more
useful, 2019-03-14) there's only ever been one user of the
OPT_ARGUMENT(), that user was added in 20de316e334 (difftool: allow
running outside Git worktrees with --no-index, 2019-03-14).
The OPT_ARGUMENT() feature itself was added way back in
580d5bffdea (parse-options: new option type to treat an option-like
parameter as an argument., 2008-03-02), but as discussed in
1a85b49b87a wasn't used until 20de316e334 in 2019.
Now that the preceding commit has migrated this code over to using
"struct strvec" to manage the "args" member of a "struct
child_process", we can just use that directly instead of relying on
OPT_ARGUMENT.
This has a minor change in behavior in that if we'll pass --no-index
we'll now always pass it as the first argument, before we'd pass it in
whatever position the caller did. Preserving this was the real value
of OPT_ARGUMENT(), but as it turns out we didn't need that either. We
can always inject it as the first argument, the other end will parse
it just the same.
Note that we cannot remove the "out" and "cpidx" members of "struct
parse_opt_ctx_t" added in 580d5bffdea, while they were introduced with
OPT_ARGUMENT() we since used them for other things.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently added tips for server admins to configure various transports
to support v2's GIT_PROTOCOL variable. While the protocol-v2 document is
pretty technical and not of interest to most admins, it may be a
starting point for them to figure out how to turn on v2. Let's put some
pointers from there to the other documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
|
|
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
|
|
Update the technical documentation to describe the multi-pack bitmap
format. This patch merely introduces the new format, and describes its
high-level ideas. Git does not yet know how to read nor write these
multi-pack variants, and so the subsequent patches will:
- Introduce code to interpret multi-pack bitmaps, according to this
document.
- Then, introduce code to write multi-pack bitmaps from the 'git
multi-pack-index write' sub-command.
Finally, the implementation will gain tests in subsequent patches (as
opposed to inline with the patch teaching Git how to write multi-pack
bitmaps) to avoid a cyclic dependency.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --advertise-refs documentation in git-upload-pack added in
9812f2136b3 (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in
e52449b6722 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 0c4fd732f0 ("Move computation of dir_rename_count from
merge-ort to diffcore-rename", 2021-02-27), much of the logic for
computing directory renames moved into diffcore-rename.
directory-rename-detection.txt had claims that all of that logic was
found in merge-recursive. Update the documentation.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofixes.
* ar/typofix:
*: fix typos which duplicate a word
|
|
Docfix.
* js/trace2-discard-event-docfix:
docs: fix api-trace2 doc for "too_many_files" event
|
|
Docfix.
* tk/partial-clone-repack-doc:
Remove warning that repack only works on non-promisor packfiles
|
|
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
|
|
Fix typos in documentation, code comments, and RelNotes which repeat
various words. In trivial cases, just delete the duplicated word and
rewrap text, if needed. Reword the affected sentence in
Documentation/RelNotes/1.8.4.txt for it to make sense.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* tl/fix-packfile-uri-doc:
packfile-uri.txt: fix blobPackfileUri description
|
|
In 87db61a (trace2: write discard message to sentinel files,
2019-10-04), we added a new "too_many_files" event for when trace2
logging would create too many files in an output directory.
Unfortunately, the api-trace2 doc described a "discard" event instead.
Fix the doc to use the correct event name.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-repack doc clearly states that it *does* operate on promisor
packfiles (in a separate partition), with "-a" specified. Presumably
the statements here are outdated, as they feature from the first doc
in 2017 (and the repack support was added in 2018)
Signed-off-by: Tao Klerks <tao@klerks.biz>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the 'uploadpack.blobPackfileUri' description in packfile-uri.txt
and the correct format also can be seen in t5702.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will soon be adding an optimization that caches (in memory only,
never written to disk) upstream renames during a sequence of merges such
as occurs during a cherry-pick or rebase operation. Add several tests
meant to stress such an implementation to ensure it does the right
thing, and include a test whose outcome we will later change due to this
optimization as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remembering renames on the upstream side of history in an early merge of
a rebase or cherry-pick for re-use in a latter merge of the same
operation makes pretty good intuitive sense. However, trying to show
that it doesn't cause some subtle behavioral difference or some funny
edge or corner case is much more involved. And, in fact, it does
introduce a subtle behavioral change.
Document all the assumptions, special cases, and logic involved in such
an optimization, and describe why this optimization is safe under the
current optimizations/features/etc. -- even when the subtle behavioral
change is triggered.
Part of the point of adding this document that goes over the
optimization in such laborious detail, is that it is possible that
significant future changes (optimizations or feature changes) could
interact with this optimization in interesting ways; this document is
here to help folks making big changes sanity check that the assumptions
and arguments underlying this optimization are still valid. (As a side
note, creating this document forced me to review things in sufficient
detail that I found I was not properly caching directory-rename-induced
renames, resulting in the code not being aware of those renames and
causing unnecessary diffcore_rename_extended() calls in subsequent
merges.)
A subsequent commit will add several testcases based on this document
meant to stress-test the implementation and also document the case with
the subtle behavioral change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" learns to discover common ancestor with the receiving
end over protocol v2.
* jt/push-negotiation:
send-pack: support push negotiation
fetch: teach independent negotiation (no packfile)
fetch-pack: refactor command and capability write
fetch-pack: refactor add_haves()
fetch-pack: refactor process_acks()
|
|
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
|
|
Currently, the packfile negotiation step within a Git fetch cannot be
done independent of sending the packfile, even though there is at least
one application wherein this is useful. Therefore, make it possible for
this negotiation step to be done independently. A subsequent commit will
use this for one such application - push negotiation.
This feature is for protocol v2 only. (An implementation for protocol v0
would require a separate implementation in the fetch, transport, and
transport helper code.)
In the protocol, the main hindrance towards independent negotiation is
that the server can unilaterally decide to send the packfile. This is
solved by a "wait-for-done" argument: the server will then wait for the
client to say "done". In practice, the client will never say it; instead
it will cease requests once it is satisfied.
In the client, the main change lies in the transport and transport
helper code. fetch_refs_via_pack() performs everything needed - protocol
version and capability checks, and the negotiation itself.
There are 2 code paths that do not go through fetch_refs_via_pack() that
needed to be individually excluded: the bundle transport (excluded
through requiring smart_options, which the bundle transport doesn't
support) and transport helpers that do not support takeover. If or when
we support independent negotiation for protocol v0, we will need to
modify these 2 code paths to support it. But for now, report failure if
independent negotiation is requested in these cases.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The checkout machinery has been taught to perform the actual
write-out of the files in parallel when able.
* mt/parallel-checkout-part-2:
parallel-checkout: add design documentation
parallel-checkout: support progress displaying
parallel-checkout: add configuration options
parallel-checkout: make it truly parallel
unpack-trees: add basic support for parallel checkout
|
|
Builds on top of the sparse-index infrastructure to mark operations
that are not ready to mark with the sparse index, causing them to
fall back on fully-populated index that they always have worked with.
* ds/sparse-index-protections: (47 commits)
name-hash: use expand_to_path()
sparse-index: expand_to_path()
name-hash: don't add directories to name_hash
revision: ensure full index
resolve-undo: ensure full index
read-cache: ensure full index
pathspec: ensure full index
merge-recursive: ensure full index
entry: ensure full index
dir: ensure full index
update-index: ensure full index
stash: ensure full index
rm: ensure full index
merge-index: ensure full index
ls-files: ensure full index
grep: ensure full index
fsck: ensure full index
difftool: ensure full index
commit: ensure full index
checkout: ensure full index
...
|
|
Sometimes it is useful to get information of an object without having to
download it completely.
Add the "object-info" capability that lets the client ask for
object-related information with their full hexadecimal object names.
Only sizes are returned for now.
Signed-off-by: Bruno Albuquerque <bga@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation updates, with unrelated comment updates, too.
* ab/usage-error-docs:
api docs: document that BUG() emits a trace2 error event
api docs: document BUG() in api-error-handling.txt
usage.c: don't copy/paste the same comment three times
|
Taylor Blau
Junio C Hamano
Elijah Newren
Jonathan Tan
Teng Long
Josh Steadmon
Calvin Wan
Eric Wong
Jeff Hostetler
Jeff King
Ævar Arnfjörð Bjarmason
Emily Shaffer
Andrei Rybak
Tao Klerks
Bruno Albuquerque