| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
|
|
Docfix.
* ds/commit-graph:
commit-graph: fix documentation inconsistencies
|
|
Doc fix.
* vs/typofixes:
Documentation: spelling and grammar fixes
|
|
Doc fix.
* bw/protocol-v2:
protocol-v2 doc: put HTTP headers after request
|
|
The commit-graph feature shipped in Git 2.18 has some inconsistencies in
the constants used by the implementation and specified by the format
document.
The commit data chunk uses the key "CDAT" in the file format, but was
previously documented to say "CGET".
The commit data chunk stores commit parents using two 32-bit fields that
typically store the integer position of the parent in the list of commit
ids within the commit-graph file. When a parent does not exist, we had
documented the value 0xffffffff, but implemented the value 0x70000000.
This swap is easy to correct in the documentation, but unfortunately
reduces the number of commits that we can store in the commit-graph.
Update that estimate, too.
Reported-by: Grant Welch <gwelch925@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a variety of aspects that are common to all rebases regardless
of which backend is in use; however, the behavior for these different
aspects varies in ways that could surprise users. (In fact, it's not
clear -- to me at least -- that these differences were even desirable or
intentional.) Document these differences.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
HTTP servers return 400 if you send headers before the GET request.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a short hexadecimal string is used to name an object but there
are multiple objects that share the string as the prefix of their
names, the code lists these ambiguous candidates in a help message.
These object names are now sorted according to their types for
easier eyeballing.
* ab/get-short-oid:
get_short_oid: sort ambiguous objects by type, then SHA-1
sha1-name.c: move around the collect_ambiguous() function
git-p4: change "commitish" typo to "committish"
sha1-array.h: align function arguments
sha1-name.c: remove stray newline
|
|
Transfer protocol v2 learned to support the partial clone.
* jt/partial-clone-proto-v2:
{fetch,upload}-pack: support filter in protocol v2
upload-pack: read config when serving protocol v2
upload-pack: fix error message typo
|
|
The functionality of "$GIT_DIR/info/grafts" has been superseded by
the "refs/replace/" mechanism for some time now, but the internal
code had support for it in many places, which has been cleaned up
in order to drop support of the "grafts" mechanism.
* js/deprecate-grafts:
Remove obsolete script to convert grafts to replace refs
technical/shallow: describe why shallow cannot use replace refs
technical/shallow: stop referring to grafts
filter-branch: stop suggesting to use grafts
Deprecate support for .git/info/grafts
Add a test for `git replace --convert-graft-file`
replace: introduce --convert-graft-file
replace: prepare create_graft() for converting graft files wholesale
replace: "libify" create_graft() and callees
replace: avoid using die() to indicate a bug
commit: Let the callback of for_each_mergetag return on error
argv_array: offer to split a string by whitespace
|
|
The transport protocol v2 is getting updated further.
* bw/server-options:
fetch: send server options when using protocol v2
ls-remote: send server options when using protocol v2
serve: introduce the server-option capability
|
|
Doc update.
* nd/pack-format-doc:
pack-format.txt: more details on pack file format
|
|
Doc update.
* ao/config-api-doc:
doc: fix config API documentation about config_with_options
|
|
We now calculate generation numbers in the commit-graph file and use
them in paint_down_to_common().
Expand the section on generation numbers to discuss how the three
special generation numbers GENERATION_NUMBER_INFINITY, _ZERO, and
_MAX interact with other generation numbers.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current document mentions OBJ_* constants without their actual
values. A git developer would know these are from cache.h but that's
not very friendly to a person who wants to read this file to implement
a pack file parser.
Similarly, the deltified representation is not documented at all (the
"document" is basically patch-delta.c). Translate that C code to
English with a bit more about what ofs-delta and ref-delta mean.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the output emitted when an ambiguous object is encountered so
that we show tags first, then commits, followed by trees, and finally
blobs. Within each type we show objects in hashcmp() order. Before
this change the objects were only ordered by hashcmp().
The reason for doing this is that the output looks better as a result,
e.g. the v2.17.0 tag before this change on "git show e8f2" would
display:
hint: The candidates are:
hint: e8f2093055 tree
hint: e8f21caf94 commit 2013-06-24 - bash prompt: print unique detached HEAD abbreviated object name
hint: e8f21d02f7 blob
hint: e8f21d577c blob
hint: e8f25a3a50 tree
hint: e8f26250fa commit 2017-02-03 - Merge pull request #996 from jeffhostetler/jeffhostetler/register_rename_src
hint: e8f2650052 tag v2.17.0
hint: e8f2867228 blob
hint: e8f28d537c tree
hint: e8f2a35526 blob
hint: e8f2bc0c06 commit 2015-05-10 - Documentation: note behavior for multiple remote.url entries
hint: e8f2cf6ec0 tree
Now we'll instead show:
hint: e8f2650052 tag v2.17.0
hint: e8f21caf94 commit 2013-06-24 - bash prompt: print unique detached HEAD abbreviated object name
hint: e8f26250fa commit 2017-02-03 - Merge pull request #996 from jeffhostetler/jeffhostetler/register_rename_src
hint: e8f2bc0c06 commit 2015-05-10 - Documentation: note behavior for multiple remote.url entries
hint: e8f2093055 tree
hint: e8f25a3a50 tree
hint: e8f28d537c tree
hint: e8f2cf6ec0 tree
hint: e8f21d02f7 blob
hint: e8f21d577c blob
hint: e8f2867228 blob
hint: e8f2a35526 blob
Since we show the commit data in the output that's nicely aligned once
we sort by object type. The decision to show tags before commits is
pretty arbitrary. I don't want to order by object_type since there
tags come last after blobs, which doesn't make sense if we want to
show the most important things first.
I could display them after commits, but it's much less likely that
we'll display a tag, so if there is one it makes sense to show it
prominently at the top.
A note on the implementation: Derrick rightly pointed out[1] that
we're bending over backwards here in get_short_oid() to first
de-duplicate the list, and then emit it, but could simply do it in one
step.
The reason for that is that oid_array_for_each_unique() doesn't
actually require that the array be sorted by oid_array_sort(), it just
needs to be sorted in some order that guarantees that all objects with
the same ID are adjacent to one another, which (barring a hash
collision, which'll be someone else's problem) the sort_ambiguous()
function does.
I agree that would be simpler for this code, and had forgotten why I
initially wrote it like this[2]. But on further reflection I think
it's better to do more work here just so we're not underhandedly using
the oid-array API where we lie about the list being sorted. That would
break any subsequent use of oid_array_lookup() in subtle ways.
I could get around that by hacking the API itself to support this
use-case and documenting it, which I did as a WIP patch in [3], but I
think it's too much code smell just for this one call site. It's
simpler for the API to just introduce a oid_array_for_each() function
to eagerly spew out the list without sorting or de-duplication, and
then do the de-duplication and sorting in two passes.
1. https://public-inbox.org/git/20180501130318.58251-1-dstolee@microsoft.com/
2. https://public-inbox.org/git/876047ze9v.fsf@evledraar.gmail.com/
3. https://public-inbox.org/git/874ljrzctc.fsf@evledraar.gmail.com/
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit dc8441fdb ("config: don't implicitly use gitdir or commondir",
2017-06-14) the function git_config_with_options was renamed to
config_with_options to better reflect the fact that it does not access
the git global config or the repo config by default.
However Documentation/technical/api-config.txt still refers to the
previous name, fix that.
While at it also update the documentation about the extra parameters,
because they too changed since the initial definition.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
|
|
Moving a submodule that itself has submodule in it with "git mv"
forgot to make necessary adjustment to the nested sub-submodules;
now the codepath learned to recurse into the submodules.
* sb/submodule-move-nested:
submodule: fixup nested submodules after moving the submodule
submodule-config: remove submodule_from_cache
submodule-config: add repository argument to submodule_from_{name, path}
submodule-config: allow submodule_free to handle arbitrary repositories
grep: remove "repo" arg from non-supporting funcs
submodule.h: drop declaration of connect_work_tree_and_git_dir
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
The fetch-pack/upload-pack protocol v2 was developed independently of
the filter parameter (used in partial fetches), thus it did not include
support for it. Add support for the filter parameter.
Like in the legacy protocol, the server advertises and supports "filter"
only if uploadpack.allowfilter is configured.
Like in the legacy protocol, the client continues with a warning if
"--filter" is specified, but the server does not advertise it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
It is tempting to do away with commit_graft altogether (in the long
haul), now that grafts are deprecated.
However, the shallow feature needs a couple of things that the replace
refs cannot fulfill. Let's point that out in the documentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that grafts are deprecated, we should start to assume that readers
have no idea what grafts are. So it makes more sense to make the
description of the "shallow" feature stand on its own.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename bunch of source files to more consistently use dashes
instead of underscores to connect words.
* sb/filenames-with-dashes:
replace_object.c: rename to use dash in file name
sha1_file.c: rename to use dash in file name
sha1_name.c: rename to use dash in file name
exec_cmd: rename to use dash in file name
unicode_width.h: rename to use dash in file name
write_or_die.c: rename to use dashes in file name
|
|
Docfix.
* en/doc-typoes:
Documentation: normalize spelling of 'normalised'
Documentation: fix several one-character-off spelling errors
|
|
Introduce the "server-option" capability to protocol version 2. This
enables future clients the ability to send server specific options in
command requests when using protocol version 2.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add Documentation/technical/commit-graph.txt with details of the planned
commit graph feature, including future plans.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add document specifying the binary format for commit graphs. This
format allows for:
* New versions.
* New hash functions and hash lengths.
* Optional extensions.
Basic header information is followed by a binary table of contents
into "chunks" that include:
* An ordered list of commit object IDs.
* A 256-entry fanout into that list of OIDs.
* A list of metadata for the commits.
* A list of "large edges" to enable octopus merges.
The format automatically includes two parent positions for every
commit. This favors speed over space, since using only one position
per commit would cause an extra level of indirection for every merge
commit. (Octopus merges suffer from this indirection, but they are
very rare.)
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At some point we may want to rename the function so that it describes what
it actually does as 'submodule_free' doesn't quite describe that this
clears a repository's submodule cache. But that's beyond the scope of
this series.
While at it remove the extern key word from its declaration.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Attempt to clarify what the SHAttered attack means in practice for
Git. The previous version of the text made no mention whatsoever of
Git already having a mitigation for this specific attack, which the
SHAttered researchers claim will detect cryptanalytic collision
attacks.
I may have gotten some of the nuances wrong, but as far as I know this
new text accurately summarizes the current situation with SHA-1 in
git. I.e. git doesn't really use SHA-1 anymore, it uses
Hardened-SHA-1 (they just so happen to produce the same outputs
99.99999999999...% of the time).
Thus the previous text was incorrect in asserting that:
[...]As a result [of SHAttered], SHA-1 cannot be considered
cryptographically secure any more[...]
That's not the case. We have a mitigation against SHAttered, *however*
we consider it prudent to move to work towards a NewHash should future
vulnerabilities in either SHA-1 or Hardened-SHA-1 emerge.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "Repository format extension" to accurately describe what
happens with different versions of Git when they encounter NewHash
repositories, instead of only saying what happens with versions v2.7.0
and later.
See ab9cb76f66 ("Repository format version check.", 2005-11-25) and
00a09d57eb ("introduce "extensions" form of
core.repositoryformatversion", 2015-06-23) for the relevant changes to
the setup code where these variables are checked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable shallow clones and deepen requests using protocol version 2 if
the server 'fetch' command supports the 'shallow' feature.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When communicating with a v2 server, perform a fetch by requesting the
'fetch' command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the 'fetch' server command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the ls-refs server command. In protocol v2, the ls-refs
command is used to request the ref advertisement from the server. Since
it is a command which can be requested (as opposed to mandatory in v1),
a client can sent a number of parameters in its request to limit the ref
advertisement based on provided ref-prefixes.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce git-serve, the base server for protocol version 2.
Protocol version 2 is intended to be a replacement for Git's current
wire protocol. The intention is that it will be a simpler, less
wasteful protocol which can evolve over time.
Protocol version 2 improves upon version 1 by eliminating the initial
ref advertisement. In its place a server will export a list of
capabilities and commands which it supports in a capability
advertisement. A client can then request that a particular command be
executed by providing a number of capabilities and command specific
parameters. At the completion of a command, a client can request that
another command be executed or can terminate the connection by sending a
flush packet.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A doc update.
* jk/smart-http-protocol-doc-fix:
smart-http: document flush after "# service" line
|
|
The http-protocol.txt spec fails to mention that a flush packet
comes in the smart server response after sending the "service"
header.
Technically the client code is actually ready to receive an
arbitrary number of headers here, but since we haven't
introduced any other headers in the past decade (and the
client would just throw them away), let's not mention it in
the spec.
This fixes both BNF and the example. While we're fixing the
latter, let's also add the missing flush after the ref list.
Reported-by: Dorian Taylor <dorian.taylor.lists@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* rd/typofix:
Correct mispellings of ".gitmodule" to ".gitmodules"
t/: correct obvious typo "detahced"
|
|
Conversion from uchar[20] to struct object_id continues.
* po/object-id:
sha1_file: rename hash_sha1_file_literally
sha1_file: convert write_loose_object to object_id
sha1_file: convert force_object_loose to object_id
sha1_file: convert write_sha1_file to object_id
notes: convert write_notes_tree to object_id
notes: convert combine_notes_* to object_id
commit: convert commit_tree* to object_id
match-trees: convert splice_tree to object_id
cache: clear whole hash buffer with oidclr
sha1_file: convert hash_sha1_file to object_id
dir: convert struct sha1_stat to use object_id
sha1_file: convert pretend_sha1_file to object_id
|
|
There are a small number of misspellings, ".gitmodule", scattered
throughout the code base, correct them ... no apparent functional
changes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* jt/long-running-process-doc:
Docs: split out long-running subprocess handshake
|
|
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
|
Junio C Hamano
Derrick Stolee
Elijah Newren
Ville Skyttä
Josh Steadmon
Nguyễn Thái Ngọc Duy
Ævar Arnfjörð Bjarmason
Antonio Ospite
Jonathan Tan
Johannes Schindelin
Brandon Williams
Stefan Beller
Jeff King
Robert P. J. Day