summaryrefslogtreecommitdiff
path: root/Documentation/gittutorial.txt
AgeCommit message (Collapse)AuthorFilesLines
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Change remote tracking to remote-tracking in non-trivial placesLibravatar Matthieu Moy1-2/+2
To complement the straightforward perl application in previous patch, this adds a few manual changes. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-03Replace "remote tracking" with "remote-tracking"Libravatar Matthieu Moy1-1/+1
"remote-tracking" branch makes it explicit that the branch is "tracking a remote", as opposed to "remote, and tracking something". See discussion in e.g. http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com for more details. This patch is a straightforward application of perl -pi -e 's/remote tracking branch/remote-tracking branch/' except in the RelNotes directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-21/+21
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-06-30Makes some cleanup/review in gittutorialLibravatar Thadeu Lima de Souza Cascardo1-12/+12
There are some different but little cleanup changes to fix some missing quotes, to fix what seemed to be an unended sentence, to reident a little paragraph with too large a sentence and fix a branch name that was referred to twice later by another name. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06Documentation: refer to gitworkflows(7) from tutorial and git(1)Libravatar Thomas Rast1-0/+4
Add references to the gitworkflows(7) manpage added in f948dd8 (Documentation: add manpage about workflows, 2008-10-19) to both gittutorial(1) and git(1), so that new users might actually discover and read it. Noticed by Randal L. Schwartz. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-25gittutorial: remove misleading noteLibravatar Miklos Vajna1-3/+1
In the tutorial Alice initializes the repository, and Bob clones it. So Bob can just do a 'git pull', but Alice will need 'git pull <url> <branch>'. The note suggested that the branch parameter is not necessary, which is no longer true these days. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-05Use capitalized names where appropriateLibravatar Henrik Austad1-2/+2
The Linux kernel and Emacs are both spelled capitalized Signed-off-by: Henrik Austad <henrik@austad.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-17Documentation: tutorial: add information about "git help" at the beginningLibravatar Christian Couder1-0/+10
Talking about "git help" is useful because it has a few more features (like when using it without arguments or with "-a") and it may work on non unix like platforms. Also add a few links to git-help(1) in "See also" sections. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-29tutorial: gentler illustration of Alice/Bob workflow using gitkLibravatar Paolo Ciarrocchi1-1/+28
Update to gitutorial as discussedin the git mailing list: http://marc.info/?t=121969390900002&r=1&w=2 Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-14tutorial: clarify "pull" is "fetch + merge"Libravatar Junio C Hamano1-1/+27
The document says that a fetch with a configured remote stores what are fetched in the remote tracking branches "Unlike the longhand form", but there is no longhand form "fetch" demonstrated earlier. This adds a missing demonstration of the longhand form, and a new paragraph to explain why some people might want to fetch before pull. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-14tutorial: use prompt with user names in example, to clarify who is doing whatLibravatar Ian Katz1-13/+13
Signed-off-by: Ian Katz <ifreecarve@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize gitk's name (where it was in teletype font)Libravatar Jonathan Nieder1-1/+1
The name `gitk` is sometimes meant to be entered at the command prompt, but most uses are just referring to the program with that name (not the incantation to start it). Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-21/+21
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-23/+23
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-15/+15
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: prepare to be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-2/+2
With the dashed forms of git commands not in $(bindir), we have to change many instances of "git-command" to "git command". Also, for consistency it is at times appropriate to make the opposite change. In some cases, the change is not so simple as changing one character. This patch gets rid of some of those cases by rewrapping lines. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: complicate example of "man git-command"Libravatar Jonathan Nieder1-2/+2
The manual page for the command invoked as "git clone" is named git-clone(1), and similarly for the rest of the git commands. Make sure our first example of this in tutorials makes it clear that it is the first two words of a command line that make up the command's name (that is: for example, the effect of "git svn dcommit" is described in git-svn(1)). Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: fix links to tutorials and other new manual pagesLibravatar Jonathan Nieder1-4/+4
With the conversion of HTML documentation to man pages tutorial.html -> gittutorial (7) tutorial-2.html -> gittutorial-2 (7) cvs-migration.html -> gitcvs-migration (7) diffcore.html -> gitdiffcore (7) repository-layout.html -> gitrepository-layout (5) hooks.html -> githooks (5) glossary.html -> gitglossary (7) core-tutorial.html -> gitcore-tutorial (7) and the automatic update of references to these pages, a little debris was left behind. We clear it away. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-11Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: fix typo in tutorial
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-01Documentation: convert "glossary" and "core-tutorial" to man pagesLibravatar Christian Couder1-0/+2
This patch renames the following documents and at the same time converts them to the man format: core-tutorial.txt -> gitcore-tutorial.txt glossary.txt -> gitglossary.txt But as the glossary is included in the user manual and as the new gitglossary man page cannot be included as a whole in the user manual, the actual glossary content is now in its own "glossary-content.txt" new file. And this file is included by both the user manual and the gitglossary man page. Other documents that reference the above ones are changed accordingly and sometimes improved a little too. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24Documentation: convert tutorials to man pagesLibravatar Christian Couder1-0/+606
This patch renames the following documents and at the same time converts them to the man page format: cvs-migration.txt -> gitcvs-migration.txt tutorial.txt -> gittutorial.txt tutorial-2.txt -> gittutorial-2.txt These new man pages are put in section 7, and other documents that reference the above ones are change accordingly. [jc: with help from Nanako to clean things up] Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>