summaryrefslogtreecommitdiff
path: root/Documentation/gitrepository-layout.txt
AgeCommit message (Collapse)AuthorFilesLines
2013-06-09Document .git/modulesLibravatar Fredrik Gustafsson1-0/+3
A note in the beginning of this document describes the behavior already. This patch just adds where to find the repositories. Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-22Merge branch 'nd/checkout-keep-sparse'Libravatar Junio C Hamano1-0/+4
Make the initial "sparse" selection of the paths more sticky across "git checkout". * nd/checkout-keep-sparse: checkout: add --ignore-skip-worktree-bits in sparse checkout mode
2013-04-15The name of the hash function is "SHA-1", not "SHA1"Libravatar Thomas Ackermann1-1/+1
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function. When used as a programming symbol, we keep "SHA1". Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15checkout: add --ignore-skip-worktree-bits in sparse checkout modeLibravatar Nguyễn Thái Ngọc Duy1-0/+4
"git checkout -- <paths>" is usually used to restore all modified files in <paths>. In sparse checkout mode, this command is overloaded with another meaning: to add back all files in <paths> that are excluded by sparse patterns. As the former makes more sense for day-to-day use. Switch it to the default and the latter enabled with --ignore-skip-worktree-bits. While at there, add info/sparse-checkout to gitrepository-layout.txt Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Documentation: describe the "repository" in repository-layoutLibravatar Junio C Hamano1-6/+18
Update the introductory part and concisely explain how gitfile is handled, what it is used for and for what effect. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-5/+5
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-25Doc repository-layout: Show refs/replaceLibravatar Philip Oakley1-0/+6
Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Jeff King <peff@peff.net>
2011-08-23Documentation: Grammar correction, wording fixes and cleanupLibravatar Ben Walton1-31/+27
Correct a few grammar issues in gitrepository-layout.txt and also rewords a few sections for clarity. Remove references to using http-fetch without -a to create a broken repository. Mark a few areas of the repository structure as legacy. Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20Documentation: spelling fixesLibravatar Ville Skyttä1-1/+1
[jc: with wording changes from Jonathan Nieder] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-9/+9
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2008-12-17Documentation: fix description for enabling hooksLibravatar Markus Heidelberg1-1/+2
Since f98f8cb (Ship sample hooks with .sample suffix, 2008-06-24) hooks are not enabled by making them executable anymore, but by removing the '.sample' suffix from the filename. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-9/+9
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-1/+1
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-9/+9
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: prepare to be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-4/+4
With the dashed forms of git commands not in $(bindir), we have to change many instances of "git-command" to "git command". Also, for consistency it is at times appropriate to make the opposite change. In some cases, the change is not so simple as changing one character. This patch gets rid of some of those cases by rewrapping lines. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: fix links to tutorials and other new manual pagesLibravatar Jonathan Nieder1-1/+1
With the conversion of HTML documentation to man pages tutorial.html -> gittutorial (7) tutorial-2.html -> gittutorial-2 (7) cvs-migration.html -> gitcvs-migration (7) diffcore.html -> gitdiffcore (7) repository-layout.html -> gitrepository-layout (5) hooks.html -> githooks (5) glossary.html -> gitglossary (7) core-tutorial.html -> gitcore-tutorial (7) and the automatic update of references to these pages, a little debris was left behind. We clear it away. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: convert "diffcore" and "repository-layout" to man pagesLibravatar Christian Couder1-0/+208
This patch renames the following documents and at the same time converts them to the man format: diffcore.txt -> gitdiffcore.txt (man section 7) repository-layout.txt -> gitrepository-layout.txt (man section 5) Other documents that reference the above ones are changed accordingly. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>