| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
|
|
Introduce the transport-helper capability 'stateless-connect'. This
capability indicates that the transport-helper can be requested to run
the 'stateless-connect' command which should attempt to make a
stateless connection with a remote end. Once established, the
connection can be used by the git client to communicate with
the remote end natively in a stateless-rpc manner as supported by
protocol v2. This means that the client must send everything the server
needs in a single request as the client must not assume any
state-storing on the part of the server or transport.
If a stateless connection cannot be established then the remote-helper
will respond in the same manner as the 'connect' command indicating that
the client should fallback to using the dumb remote-helper commands.
A future patch will implement the 'stateless-connect' capability in our
http remote-helper (remote-curl) so that protocol v2 can be used using
the http transport.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: René Genz <liebundartig@freenet.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc markup fix.
* jk/doc-remote-helpers-markup-fix:
docs/gitremote-helpers: fix unbalanced quotes
|
|
Each of these options is missing the closing single-quote on
the option name. This understandably confuses asciidoc,
which ends up rendering a stray quote, like:
option cloning {'true|false}
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
This is an application of the newly added CodingGuidelines to HEAD and
variants like FETCH_HEAD. It was obtained with:
perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git-fetch, --depth argument is always relative with the latest
remote refs. This makes it a bit difficult to cover this use case,
where the user wants to make the shallow history, say 3 levels
deeper. It would work if remote refs have not moved yet, but nobody
can guarantee that, especially when that use case is performed a
couple months after the last clone or "git fetch --depth". Also,
modifying shallow boundary using --depth does not work well with
clones created by --since or --not.
This patch fixes that. A new argument --deepen=<N> will add <N> more (*)
parent commits to the current history regardless of where remote refs
are.
Have/Want negotiation is still respected. So if remote refs move, the
server will send two chunks: one between "have" and "want" and another
to extend shallow history. In theory, the client could send no "want"s
in order to get the second chunk only. But the protocol does not allow
that. Either you send no want lines, which means ls-remote; or you
have to send at least one want line that carries deep-relative to the
server..
The main work was done by Dongcan Jiang. I fixed it up here and there.
And of course all the bugs belong to me.
(*) We could even support --deepen=<N> where <N> is negative. In that
case we can cut some history from the shallow clone. This operation
(and --depth=<shorter depth>) does not require interaction with remote
side (and more complicated to implement as a result).
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change GIT_* variables that where in italic style to monospaced font
according to the guideline. It was obtained with
perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Text like "{foo}" triggers an AsciiDoc attribute; we have to
write "\{foo}" to suppress this. But when the "foo" is not a
syntactically valid attribute, we can skip the quoting. This
makes the source nicer to read, and looks better under
Asciidoctor. With AsciiDoc itself, this patch produces no
changes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular, git-fast-import and -export link to each
other, and gitremote-helpers links to existing remote
helpers, and vice versa. Also link to fast-import from the
remote helper spec, as this is relevant for remote helpers
using the fast-import format.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates transport-helper, fast-import and fast-export to allow the
ref mapping and ref deletion in a way similar to the natively
supported transports.
* fc/transport-helper-fixes:
remote-bzr: support the new 'force' option
test-hg.sh: tests are now expected to pass
transport-helper.c: do not overwrite forced bit
transport-helper: check for 'forced update' message
transport-helper: add 'force' to 'export' helpers
transport-helper: don't update refs in dry-run
transport-helper: mismerge fix
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise they cannot know when to force the push or not (other than
hacks).
Tests-by: Richard Hansen <rhansen@bbn.com>
Documentation-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/remote-helpers-doc:
Documentation/remote-helpers: document common use-case for private ref
|
|
* mm/mediawiki-dumb-push-fix:
git-remote-mediawiki: no need to update private ref in non-dumb push
git-remote-mediawiki: use no-private-update capability on dumb push
transport-helper: add no-private-update capability
git-remote-mediawiki: add test and check Makefile targets
|
|
* nd/clone-connectivity-shortcut:
smart http: use the same connectivity check on cloning
|
|
Since 664059fb (transport-helper: update remote helper namespace,
2013-04-17), a 'push' operation on a remote helper updates the
private ref by default. This is often a good thing, but it can also
be desirable to disable this update to force the next 'pull' to
re-import the pushed revisions.
Allow remote-helpers to disable the automatic update by introducing a new
capability.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current documentation mentions the private ref namespace, but does
not really explain why it can be useful.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is an extension of c6807a4 (clone: open a shortcut for
connectivity check - 2013-05-26) to reduce the cost of connectivity
check at clone time, this time with smart http protocol.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update transport helper to report errors and maintain ref hierarchy
used to keep track of remote helper state better.
* fc/transport-helper-error-reporting:
transport-helper: fix remote helper namespace regression
test: remote-helper: add missing and
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
|
|
This has never worked, since it's inception the code simply skips all
the refs, essentially telling fast-export to do nothing.
Let's at least tell the user what's going on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refspec capability is not only used by 'import', also by
'export', and it's recommended in both.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The *:* refspec doesn't work, and never has, clarify the code and
documentation to reflect that. This in effect reverts commit 9e7673e
(gitremote-helpers(1): clarify refspec behaviour).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows a remote helper using the 'export' protocol to specify that
it supports signed tags, changing the handing from 'warn-strip' to
'verbatim'.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation says that "If no 'refspec' capability is advertised,
there is an implied `refspec *:*`" but this is only the case for the
"import" command.
Since there is a comment in transport-helper.c indicating that this
default is for historical reasons, change the documentation to clarify
that a refspec should always be specified.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git help remote-helpers" did not work; 'remote-helpers' is not
a subcommand name but a concept, so its documentation should have
been in gitremote-helpers, not git-remote-helpers.
* jk/remote-helpers-doc:
Rename {git- => git}remote-helpers.txt
|
|
When looking up a topic via "git help <topic>", git-help prepends "git-"
to topics that are the names of commands (either builtin or found on the
path) and "git" (no hyphen) to any other topic name.
"git-remote-helpers" is not the name of a command, so "git help
remote-helpers" looks for "gitremote-helpers" and does not find it.
Fix this by renaming "git-remote-helpers.txt" to
"gitremote-helpers.txt".
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Brandon Williams
Jonathan Tan
René Genz
Jeff King
Stefan Beller
Matthieu Moy
Nguyễn Thái Ngọc Duy
Tom Russello
Dave Borowitz
Max Horn
Felipe Contreras
John Keeping