summaryrefslogtreecommitdiff
path: root/Documentation/gitremote-helpers.txt
AgeCommit message (Collapse)AuthorFilesLines
2019-04-22Merge branch 'js/check-docs-exe'Libravatar Junio C Hamano1-3/+1
Dev support update. * js/check-docs-exe: check-docs: fix for setups where executables have an extension check-docs: do not expect guide pages to correspond to commands check-docs: really look at the documented commands again docs: do not document the `git remote-testgit` command docs: move gitremote-helpers into section 7
2019-04-01docs: do not document the `git remote-testgit` commandLibravatar Johannes Schindelin1-2/+0
Since 7ded055401 (build: do not install git-remote-testgit, 2013-06-07), we do not install it. Therefore it makes no sense to document it, either. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-01docs: move gitremote-helpers into section 7Libravatar Johannes Schindelin1-1/+1
It is currently in section 1, but that section is intended for "Executable programs or shell commands". A more appropriate place is section 7: "Miscellaneous (including macro packages and conventions), e.g. man(7), groff(7)". This issue should have been detected earlier by `make check-docs`, but was missed due to a bug in that Makefile target (that we are about to fix). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-07Documentation: turn middle-of-line tabs into spacesLibravatar Martin Ågren1-1/+1
These tabs happen to appear in columns where they don't stand out too much, so the diff here is non-obvious. Some of these are rendered differently by AsciiDoc and Asciidoctor (although the difference might be invisible!), which is how I found a few of them. The remainder were found using `git grep "[a-zA-Z.,)]$TAB[a-zA-Z]"`. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-08Merge branch 'bw/protocol-v2'Libravatar Junio C Hamano1-0/+32
The beginning of the next-gen transfer protocol. * bw/protocol-v2: (35 commits) remote-curl: don't request v2 when pushing remote-curl: implement stateless-connect command http: eliminate "# service" line when using protocol v2 http: don't always add Git-Protocol header http: allow providing extra headers for http requests remote-curl: store the protocol version the server responded with remote-curl: create copy of the service name pkt-line: add packet_buf_write_len function transport-helper: introduce stateless-connect transport-helper: refactor process_connect_service transport-helper: remove name parameter connect: don't request v2 when pushing connect: refactor git_connect to only get the protocol version once fetch-pack: support shallow requests fetch-pack: perform a fetch using v2 upload-pack: introduce fetch server command push: pass ref prefixes when pushing fetch: pass ref prefixes when fetching ls-remote: pass ref prefixes when requesting a remote's refs transport: convert transport_get_remote_refs to take a list of ref prefixes ...
2018-03-15transport-helper: introduce stateless-connectLibravatar Brandon Williams1-0/+32
Introduce the transport-helper capability 'stateless-connect'. This capability indicates that the transport-helper can be requested to run the 'stateless-connect' command which should attempt to make a stateless connection with a remote end. Once established, the connection can be used by the git client to communicate with the remote end natively in a stateless-rpc manner as supported by protocol v2. This means that the client must send everything the server needs in a single request as the client must not assume any state-storing on the part of the server or transport. If a stateless connection cannot be established then the remote-helper will respond in the same manner as the 'connect' command indicating that the client should fallback to using the dumb remote-helper commands. A future patch will implement the 'stateless-connect' capability in our http remote-helper (remote-curl) so that protocol v2 can be used using the http transport. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-05introduce fetch-object: fetch one promisor objectLibravatar Jonathan Tan1-0/+7
Introduce fetch-object, providing the ability to fetch one object from a promisor remote. This uses fetch-pack. To do this, the transport mechanism has been updated with 2 flags, "from-promisor" to indicate that the resulting pack comes from a promisor remote (and thus should be annotated as such by index-pack), and "no-dependents" to indicate that only the objects themselves need to be fetched (but fetching additional objects is nevertheless safe). Whenever "no-dependents" is used, fetch-pack will refrain from using any object flags, because it is most likely invoked as part of a dynamic object fetch by another Git command (which may itself use object flags). An alternative to this is to leave fetch-pack alone, and instead update the allocation of flags so that fetch-pack's flags never overlap with any others, but this will end up shrinking the number of flags available to nearly every other Git command (that is, every Git command that accesses objects), so the approach in this commit was used instead. This will be tested in a subsequent commit. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-01fix minor typosLibravatar René Genz1-1/+1
Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: René Genz <liebundartig@freenet.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-15Merge branch 'jk/doc-remote-helpers-markup-fix'Libravatar Junio C Hamano1-3/+3
Doc markup fix. * jk/doc-remote-helpers-markup-fix: docs/gitremote-helpers: fix unbalanced quotes
2017-02-13docs/gitremote-helpers: fix unbalanced quotesLibravatar Jeff King1-3/+3
Each of these options is missing the closing single-quote on the option name. This understandably confuses asciidoc, which ends up rendering a stray quote, like: option cloning {'true|false} Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-08push options: pass push options to the transport helperLibravatar Stefan Beller1-0/+4
When using non-builtin protocols relying on a transport helper (such as http), push options are not propagated to the helper. The user could ask for push options and a push would seemingly succeed, but the push options would never be transported to the server, misleading the users expectation. Fix this by propagating the push options to the transport helper. This is only addressing the first issue of (1) the helper protocol does not propagate push-option (2) the http helper is not prepared to handle push-option Once we fix (2), the http transport helper can make use of push options as well, but that happens as a follow up. (1) is a bug fix, whereas (2) is a feature, which is why we only do (1) here. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-10Merge branch 'nd/shallow-deepen'Libravatar Junio C Hamano1-0/+11
The existing "git fetch --depth=<n>" option was hard to use correctly when making the history of an existing shallow clone deeper. A new option, "--deepen=<n>", has been added to make this easier to use. "git clone" also learned "--shallow-since=<date>" and "--shallow-exclude=<tag>" options to make it easier to specify "I am interested only in the recent N months worth of history" and "Give me only the history since that version". * nd/shallow-deepen: (27 commits) fetch, upload-pack: --deepen=N extends shallow boundary by N commits upload-pack: add get_reachable_list() upload-pack: split check_unreachable() in two, prep for get_reachable_list() t5500, t5539: tests for shallow depth excluding a ref clone: define shallow clone boundary with --shallow-exclude fetch: define shallow boundary with --shallow-exclude upload-pack: support define shallow boundary by excluding revisions refs: add expand_ref() t5500, t5539: tests for shallow depth since a specific date clone: define shallow clone boundary based on time with --shallow-since fetch: define shallow boundary with --shallow-since upload-pack: add deepen-since to cut shallow repos based on time shallow.c: implement a generic shallow boundary finder based on rev-list fetch-pack: use a separate flag for fetch in deepening mode fetch-pack.c: mark strings for translating fetch-pack: use a common function for verbose printing fetch-pack: use skip_prefix() instead of starts_with() upload-pack: move rev-list code out of check_non_tip() upload-pack: make check_non_tip() clean things up on error upload-pack: tighten number parsing at "deepen" lines ...
2016-06-28doc: typeset HEAD and variants as literalLibravatar Matthieu Moy1-1/+1
This is an application of the newly added CodingGuidelines to HEAD and variants like FETCH_HEAD. It was obtained with: perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-28doc: typeset long command-line options as literalLibravatar Matthieu Moy1-4/+4
Similarly to the previous commit, use backquotes instead of forward-quotes, for long options. This was obtained with: perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt and manual tweak to remove false positive in ascii-art (o'--o'--o' to describe rewritten history). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch, upload-pack: --deepen=N extends shallow boundary by N commitsLibravatar Nguyễn Thái Ngọc Duy1-0/+4
In git-fetch, --depth argument is always relative with the latest remote refs. This makes it a bit difficult to cover this use case, where the user wants to make the shallow history, say 3 levels deeper. It would work if remote refs have not moved yet, but nobody can guarantee that, especially when that use case is performed a couple months after the last clone or "git fetch --depth". Also, modifying shallow boundary using --depth does not work well with clones created by --since or --not. This patch fixes that. A new argument --deepen=<N> will add <N> more (*) parent commits to the current history regardless of where remote refs are. Have/Want negotiation is still respected. So if remote refs move, the server will send two chunks: one between "have" and "want" and another to extend shallow history. In theory, the client could send no "want"s in order to get the second chunk only. But the protocol does not allow that. Either you send no want lines, which means ls-remote; or you have to send at least one want line that carries deep-relative to the server.. The main work was done by Dongcan Jiang. I fixed it up here and there. And of course all the bugs belong to me. (*) We could even support --deepen=<N> where <N> is negative. In that case we can cut some history from the shallow clone. This operation (and --depth=<shorter depth>) does not require interaction with remote side (and more complicated to implement as a result). Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch: define shallow boundary with --shallow-excludeLibravatar Nguyễn Thái Ngọc Duy1-0/+4
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13fetch: define shallow boundary with --shallow-sinceLibravatar Nguyễn Thái Ngọc Duy1-0/+3
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-08doc: change configuration variables formatLibravatar Tom Russello1-2/+2
This change configuration variables that where in italic style to monospace font according to the guideline. It was obtained with grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \ sed -e 's/::$//' -e 's/\./\\\\./' | \ xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org> Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-08doc: change environment variables formatLibravatar Tom Russello1-1/+1
This change GIT_* variables that where in italic style to monospaced font according to the guideline. It was obtained with perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt One of the main purposes is to stick to the CodingGuidelines as possible so that people writting new documentation by mimicking the existing are more likely to have it right (even if they didn't read the CodingGuidelines). Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org> Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-19gitremote-helpers.txt: document pushcert optionLibravatar Dave Borowitz1-0/+3
Signed-off-by: Dave Borowitz <dborowitz@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-12doc: drop backslash quoting of some curly bracesLibravatar Jeff King1-7/+7
Text like "{foo}" triggers an AsciiDoc attribute; we have to write "\{foo}" to suppress this. But when the "foo" is not a syntactically valid attribute, we can skip the quoting. This makes the source nicer to read, and looks better under Asciidoctor. With AsciiDoc itself, this patch produces no changes. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-11doc: add some crossrefs between manual pagesLibravatar Max Horn1-0/+6
In particular, git-fast-import and -export link to each other, and gitremote-helpers links to existing remote helpers, and vice versa. Also link to fast-import from the remote helper spec, as this is relevant for remote helpers using the fast-import format. Signed-off-by: Max Horn <max@quendi.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18Merge branch 'fc/transport-helper-fixes'Libravatar Junio C Hamano1-0/+4
Updates transport-helper, fast-import and fast-export to allow the ref mapping and ref deletion in a way similar to the natively supported transports. * fc/transport-helper-fixes: remote-bzr: support the new 'force' option test-hg.sh: tests are now expected to pass transport-helper.c: do not overwrite forced bit transport-helper: check for 'forced update' message transport-helper: add 'force' to 'export' helpers transport-helper: don't update refs in dry-run transport-helper: mismerge fix
2013-12-10smart-http: support shallow fetch/cloneLibravatar Nguyễn Thái Ngọc Duy1-0/+7
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-12transport-helper: add 'force' to 'export' helpersLibravatar Felipe Contreras1-0/+4
Otherwise they cannot know when to force the push or not (other than hacks). Tests-by: Richard Hansen <rhansen@bbn.com> Documentation-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-12Merge branch 'mm/remote-helpers-doc'Libravatar Junio C Hamano1-0/+6
* mm/remote-helpers-doc: Documentation/remote-helpers: document common use-case for private ref
2013-09-12Merge branch 'mm/mediawiki-dumb-push-fix'Libravatar Junio C Hamano1-0/+5
* mm/mediawiki-dumb-push-fix: git-remote-mediawiki: no need to update private ref in non-dumb push git-remote-mediawiki: use no-private-update capability on dumb push transport-helper: add no-private-update capability git-remote-mediawiki: add test and check Makefile targets
2013-09-09Merge branch 'nd/clone-connectivity-shortcut'Libravatar Junio C Hamano1-0/+10
* nd/clone-connectivity-shortcut: smart http: use the same connectivity check on cloning
2013-09-03transport-helper: add no-private-update capabilityLibravatar Matthieu Moy1-0/+5
Since 664059fb (transport-helper: update remote helper namespace, 2013-04-17), a 'push' operation on a remote helper updates the private ref by default. This is often a good thing, but it can also be desirable to disable this update to force the next 'pull' to re-import the pushed revisions. Allow remote-helpers to disable the automatic update by introducing a new capability. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-26Documentation/remote-helpers: document common use-case for private refLibravatar Matthieu Moy1-0/+6
The current documentation mentions the private ref namespace, but does not really explain why it can be useful. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-23smart http: use the same connectivity check on cloningLibravatar Nguyễn Thái Ngọc Duy1-0/+10
This is an extension of c6807a4 (clone: open a shortcut for connectivity check - 2013-05-26) to reduce the cost of connectivity check at clone time, this time with smart http protocol. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-29Merge branch 'fc/transport-helper-error-reporting'Libravatar Junio C Hamano1-6/+6
Update transport helper to report errors and maintain ref hierarchy used to keep track of remote helper state better. * fc/transport-helper-error-reporting: transport-helper: fix remote helper namespace regression test: remote-helper: add missing and t5801: "VAR=VAL shell_func args" is forbidden transport-helper: update remote helper namespace transport-helper: trivial code shuffle transport-helper: warn when refspec is not used transport-helper: clarify pushing without refspecs transport-helper: update refspec documentation transport-helper: clarify *:* refspec transport-helper: improve push messages transport-helper: mention helper name when it dies transport-helper: report errors properly
2013-04-17transport-helper: clarify pushing without refspecsLibravatar Felipe Contreras1-2/+2
This has never worked, since it's inception the code simply skips all the refs, essentially telling fast-export to do nothing. Let's at least tell the user what's going on. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-17transport-helper: update refspec documentationLibravatar Felipe Contreras1-5/+5
The refspec capability is not only used by 'import', also by 'export', and it's recommended in both. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-17transport-helper: clarify *:* refspecLibravatar Felipe Contreras1-2/+2
The *:* refspec doesn't work, and never has, clarify the code and documentation to reflect that. This in effect reverts commit 9e7673e (gitremote-helpers(1): clarify refspec behaviour). Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15transport-helper: add 'signed-tags' capabilityLibravatar John Keeping1-0/+4
This allows a remote helper using the 'export' protocol to specify that it supports signed tags, changing the handing from 'warn-strip' to 'verbatim'. Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-07gitremote-helpers(1): clarify refspec behaviourLibravatar John Keeping1-2/+2
The documentation says that "If no 'refspec' capability is advertised, there is an implied `refspec *:*`" but this is only the case for the "import" command. Since there is a comment in transport-helper.c indicating that this default is for historical reasons, change the documentation to clarify that a refspec should always be specified. Signed-off-by: John Keeping <john@keeping.me.uk> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-07Merge branch 'jk/remote-helpers-doc'Libravatar Junio C Hamano1-0/+423
"git help remote-helpers" did not work; 'remote-helpers' is not a subcommand name but a concept, so its documentation should have been in gitremote-helpers, not git-remote-helpers. * jk/remote-helpers-doc: Rename {git- => git}remote-helpers.txt
2013-02-01Rename {git- => git}remote-helpers.txtLibravatar John Keeping1-0/+423
When looking up a topic via "git help <topic>", git-help prepends "git-" to topics that are the names of commands (either builtin or found on the path) and "git" (no hyphen) to any other topic name. "git-remote-helpers" is not the name of a command, so "git help remote-helpers" looks for "gitremote-helpers" and does not find it. Fix this by renaming "git-remote-helpers.txt" to "gitremote-helpers.txt". Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>