| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The description of the '-L' option for `git log` and `gitk` is almost
the same, but is repeated in both 'git-log.txt' and 'gitk.txt' (the
difference being that 'git-log.txt' lists the option with a space
after '-L', while 'gitk.txt' lists it as stuck and notes that `gitk`
only understands the stuck form).
Reduce duplication by creating a new file, 'line-range-options.txt',
and include it in both files.
To simplify the presentation, only list the stuck form for both
commands, and remove the note about `gitk` only understanding the stuck
form.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The line number, regex or offset parameters <start> and <end> in
`git log -L <start>,<end>:<file>`, or the function name regex in
`git log -L :<funcname>:<file>` must exist in the starting
revision, or else the command exits with a fatal error.
This is not obvious in the documentation, so add a note to that
effect.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the line-log functionality (git log -L) only supports
displaying patch output (`-p | --patch`, its default behavior) and suppressing it
(`-s | --no-patch`). A check was added in the code to that effect in 5314efaea
(line-log: detect unsupported formats, 2019-03-10) but the documentation was not
updated.
Explicitly mention that `-L` implies `-p`, that patch output can be
suppressed using `-s`, and that all other diff formats are not allowed.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Applying CodingGuidelines about monospace on pathnames and URLs.
See Documentation/CodingGuidelines.txt for more information.
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu MOY <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 1c262bb7b (doc: convert \--option to --option, 2015-05-13)
explains that we used to need to write \--option to play well with older
versions of AsciiDoc, but that we do not support such versions anymore
anyway, and that Asciidoctor literally renders \--.
With [\--], which is used to denote the optional separator between
revisions and paths, Asciidoctor renders the backslash literally.
Change all [\--] to [--]. This changes nothing for AsciiDoc version
8.6.9, but is an improvement for Asciidoctor version 1.5.4.
We use double-dashes in several list entries (\--::). In my testing, it
appears that we do need to use the backslash there, so leave those.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
|
|
Retire long unused/unmaintained gitview from the contrib/ area.
* sb/remove-gitview:
doc: git-gui browser does not default to HEAD
doc: gitk: add the upstream repo location
doc: gitk: remove gitview reference
contrib: remove gitview
|
|
Match the 'git gui' information regarding the graphical browser
and its upstream location.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
contrib/gitview has been removed. Remove the reference.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify various ways to specify the "revision ranges" in the
documentation.
* po/range-doc:
doc: revisions: sort examples and fix alignment of the unchanged
doc: revisions: show revision expansion in examples
doc: revisions - clarify reachability examples
doc: revisions - define `reachable`
doc: gitrevisions - clarify 'latter case' is revision walk
doc: gitrevisions - use 'reachable' in page description
doc: revisions: single vs multi-parent notation comparison
doc: revisions: extra clarification of <rev>^! notation effects
doc: revisions: give headings for the two and three dot notations
doc: show the actual left, right, and boundary marks
doc: revisions - name the left and right sides
doc: use 'symmetric difference' consistently
|
|
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old wording was somehow implying that <start> and <end> were not
regular expressions. Also, the common case is to use a plain function
name here so <funcname> makes sense (the fact that it is a regular
expression is documented in line-range-format.txt).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
other minor grammatical issues
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
User config file location complies with the XDG base directory
specification while supporting the traditional $HOME/.gitk as a
fallback.
Signed-off-by: Astril Hayato <astrilhayato@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The -L option is the same as for git-log, so the entire block is just
copied from git-log.txt. However, until the parser is fixed we add a
caveat that gitk only understands the stuck form.
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gitk manpage suffers from a bit of neglect: there have been only
minor changes, and no changes to the set of options documented, since
a2df1fb (Documentation: New GUI configuration and command-line
options., 2008-11-13). In the meantime, the set of rev-list options
has been expanded several times by options that are useful in gitk,
e.g., --ancestry-path and the optional globbing for --branches, --tags
and --remotes.
Restructure and expand the manpage. List more options that the author
perceives as useful, while remaining somewhat terse. Ideally the user
should not have to look up any of the references, but we dispense with
precise explanations in some places and refer to git-log(1) instead.
Note that the options that have an easy GUI equivalent (e.g.,
--word-diff, -S, --grep) are deliberately not listed even in the cases
where they simply fill in the GUI fields.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add information on new git-gui and gitk command-line options,
configuration variables, and the encoding attribute.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was part of my original patch, but appears to have been lost.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistently say so in all caps as it is customary to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitk creates and uses ~/.gitk
Signed-off-by: Clifford Caoile <piyo@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For the manpage, avoid generating an em dash in code.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also reorders a handful entries to make each list sorted
alphabetically.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The revision specification syntax (sometimes referred to as
SHA1-expressions) is accepted almost everywhere in Git by
almost every tool. Unfortunately it is only documented in
git-rev-parse.txt, and most users don't know to look there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I don't think people really follow the links or think very abstractly at
all in the first place.
So I was thinking more of some explicit examples. I actually think every
command should have an example in the man-page, and hey, here's a patch to
start things off.
Of course, I'm not exactly "Mr Documentation", and I don't know that this
is the prettiest way to do this, but I checked that the resulting html and
man-page seems at least reasonable.
And hey, if the examples look like each other, that's just because I'm
also not "Mr Imagination".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The text does not say anything interesting, but at least the
author list should reflect something close to reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Philippe Blain
Corentin BOMPARD
Martin Ågren
Junio C Hamano
Philip Oakley
Matthieu Moy
Jason St. John
Astril Hayato
Thomas Rast
Thomas Rast
Thomas Ackermann
Martin von Zweigbergk
Jeff King
Jonathan Nieder
Michael J Gruber
Thomas Rast
Mike Ralphson
Sitaram Chamarty
Markus Heidelberg
Alexander Gavrilov
Yann Dirson
Abhijit Menon-Sen
Jonathan Nieder
Stephan Beyer
Christian Couder
Richard Quirk
Clifford Caoile
Dan McGee
Ralf Wildenhues
Pavel Roskin
Junio C Hamano
Shawn O. Pearce
Jonas Fonseca
sean
Linus Torvalds
Sergey Vlasov