| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current documentation reads as if .gitignore files will be parsed in
every parent directory, and not until they reach a repository boundary.
This clarifies the current behaviour.
As well, this corrects 'toplevel' to 'top-level', matching usage for
'top-level domain'.
Signed-off-by: Andrew Berry <andrew@furrypaws.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We stopped allowing symlinks for .gitmodules files in 10ecfa7649
(verify_path: disallow symlinks in .gitmodules, 2018-05-04), and we
stopped following symlinks for .gitattributes, .gitignore, and .mailmap
in the commits from 204333b015 (Merge branch 'jk/open-dotgitx-with-nofollow',
2021-03-22). The reasons are discussed in detail there, but we never
adjusted the documentation to let users know.
This hasn't been a big deal since the point is that such setups were
mildly broken and thought to be unusual anyway. But it certainly doesn't
hurt to be clear and explicit about it.
Suggested-by: Philip Oakley <philipoakley@iee.email>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Julien Richard <julien.richard@ubisoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description about slashes in gitignore patterns (used to
indicate things like "anchored to this level only" and "only
matches directories") has been revamped.
* an/ignore-doc-update:
gitignore.txt: make slash-rules more readable
|
|
Renew paragraphs relevant for pattern with slash.
Aim to make it more clear and to avoid possible
pitfalls for the reader. Add some examples.
Signed-off-by: Dr. Adam Nielsen <admin@in-ici.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A section in "git add" documentation mentions core.excludesFile and
explains how it works, but this is not specific to the command.
Move this description to gitignore.txt to be more generic.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pattern with '**' that does not have a slash on either side used
to be an invalid one, but the code now treats such double-asterisks
the same way as two normal asterisks that happen to be adjacent to
each other.
* nd/wildmatch-double-asterisk:
wildmatch: change behavior of "foo**bar" in WM_PATHNAME mode
|
|
In WM_PATHNAME mode (or FNM_PATHNAME), '*' does not match '/' and '**'
can but only in three patterns:
- '**/' matches zero or more leading directories
- '/**/' matches zero or more directories in between
- '/**' matches zero or more trailing directories/files
When '**' is present but not in one of these patterns, the current
behavior is consider the pattern invalid and stop matching. In other
words, 'foo**bar' never matches anything, whatever you throw at it.
This behavior is arguably a bit confusing partly because we can't
really tell the user their pattern is invalid so that they can fix
it. So instead, tolerate it and make '**' act like two regular '*'s
(which is essentially the same as a single asterisk). This behavior
seems more predictable.
Noticed-by: dana <dana@dana.is>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default core.excludesfile path is $XDG_CONFIG_HOME/git/ignore.
$HOME/.config/git/ignore is used if XDG_CONFIG_HOME is empty or unset,
as described later in the document.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`fnmatch(3)` is a great mention if the intended audience is
programmers. For normal users it's probably better to spell out what
a shell glob is.
This paragraph is updated to roughly tell (or remind) what the main
wildcards are supposed to do. All the details are still hidden away
behind the `fnmatch(3)` wall because bringing the whole specification
here may be too much.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with
grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5e57f9c3dfe7dd44a1b56bb5b3327d7a1356ec7c, reversing
changes made to e79112d21024beb997951381db21a70b087d459d.
We will be postponing nd/exclusion-regression-fix topic to later
cycle.
|
|
This reverts commit e80aae51f2be908e37fca47ea0dff6d7861c8497, reversing
changes made to 68846a92eafa6b2bfae778d0a656443a9fa61e59.
We will be postponing nd/exclusion-regression-fix topic to later
cycle.
|
|
Also document another limitation coming from a bug in handling the
basename match with a directory for 're-inclusion'.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there is a pattern "!foo/bar", this patch makes it not exclude
"foo" right away. This gives us a chance to examine "foo" and
re-include "foo/bar".
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Micha Wiedenmann <mw-u2@gmx.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
|
|
This reverts commit 57534ee77d22e725d971ee89c77dc6aad61c573f. The
feature added in that commit requires that patterns behave the same way
from anywhere. But some patterns can behave differently depending on
current "working" directory. The conditions to catch and avoid these
patterns are too loose. The untracked listing[1] and sparse-checkout
selection[2] can become incorrect as a result.
[1] http://article.gmane.org/gmane.comp.version-control.git/283520
[2] http://article.gmane.org/gmane.comp.version-control.git/283532
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
|
|
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".
In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.
Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes long-standing misunderstanding of what assume-unchanged is
about. Some text near what is removed by the bottom patch may also
have to be removed.
* po/doc-assume-unchanged:
gitignore.txt: do not suggest assume-unchanged
doc: make clear --assume-unchanged's user contract
|
|
git-update-index --assume-unchanged was never meant to ignore changes
to tracked files (only to spare some stats). So do not suggest it
as a means to achieve that.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation update.
* nd/gitignore-trailing-whitespace:
gitignore.txt: fix spelling of "backslash"
|
|
Signed-off-by: Ben North <ben@redfrontdoor.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Explicitly list $HOME/.config/git/ignore as one of the places you
can use to keep ignore patterns that depend on your personal choice
of tools, e.g. *~ for Emacs users.
* jn/ignore-doc:
gitignore doc: add global gitignore to synopsis
|
|
The gitignore(5) manpage already documents $XDG_CONFIG_HOME/git/ignore
but it is easy to forget that it exists. Add a reminder to the
synopsis.
Noticed while looking for a place to put a list of scratch filenames
in the cwd used by one's editor of choice.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Additionally, precedence of negated patterns is exactly as outlined in
the DESCRIPTION section, we don't need to repeat this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"**" means bold in ASCIIDOC, so we need to escape it.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
|
|
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
|
|
This works in a similar manner to git-check-attr.
Thanks to Jeff King and Junio C Hamano for the idea:
http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/doc-ignore:
gitignore.txt: suggestions how to get literal # or ! at the beginning
|
|
We support backslash escape, but we hide the details behind the phrase
"a shell glob suitable for consumption by fnmatch(3)". So it may not
be obvious how one can get literal # or ! at the beginning of pattern.
Add a few lines on how to work around the magic characters.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use separate bulleted paragraphs for the three different gitignore
pattern sources.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
A frequently asked question on #git is how to stop tracking a file
that is mistakenly tracked by git. A frequently attempted strategy is
to add such files to .gitignore.
Thus one might imagine that the gitignore documentation could be a
good entry point for 'git rm' documentation. Add some
cross-references in this vein.
While at it, move a reference to update-index --assume-unchanged from
the DESCRIPTION to lower down on the page. This way, the methodical
reader can benefit from first learning what excludes files do, then
how they relate to other git facilities.
Based-on-patch-by: Sitaram Chamarty <sitaram@atc.tcs.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A learner-by-example might want to look at the examples section first.
Help her out by supplying some section headings: PATTERN FORMAT for
the format of lines in an excludes file and EXAMPLES for the two
examples.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An asterisk in "Documentation/*.txt" quoted with \ to avoid bold text
is being output as \* because asciidoc does not consider it a
candidate for escaping (there is no matching * to pair it with).
So the manual looks like it is saying that one should write
"Documentation/\*.txt" in the .gitignore file.
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Patterns containing a / are implicitly anchored to the directory
containing the relevant .gitignore file.
Patterns not containing a / are textual matches against the path
name relative to the directory containing .gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch explains more carefully that `.gitignore` concerns only
untracked files and refers the reader to
git update-index --assume-unchanged
in the need of ignoring uncommitted changes in already tracked files.
The description of this option is lifted to a more "porcelainish"
level and explains the caveats of this usecase.
Whether feasible or not, I believe adding this functionality to
the porcelain is out of the scope of this patch. (And I personally
think that referring to the plumbing in the case of such a special
usage is fine.)
This is currently probably one of the top FAQs at #git and the
--assume-unchanged switch is not widely known; gitignore(5) is the first
place where people are likely to look for it.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Andrew Berry
Jeff King
Julien Richard
Junio C Hamano
Dr. Adam Nielsen
Denton Liu
Nguyễn Thái Ngọc Duy
Todd Zullinger
Tom Russello
Michael J Gruber
Ben North
Jonathan Nieder
Karsten Blees
Thomas Ackermann
Adam Spiers
Philip Oakley
Huynh Khoi Nguyen Nguyen
Thomas Rast
Jason Merrill
Petr Baudis
Jonathan Nieder