| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The reference-transaction hook doesn't clearly document its scope and
what values it receives as input. Document it to make it less surprising
and clearly delimit its (current) scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The githooks(5) documentation states in several places that the hook
will receive a SHA-1 or hashes of 40 characters length. Given that we're
transitioning to a world where both SHA-1 and SHA-256 are supported,
this is inaccurate.
Fix the issue by replacing mentions of SHA-1 with "object name" and not
explicitly mentioning the hash size.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Acked-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* mc/typofix:
doc: fixing two trivial typos in Documentation/
|
|
Fix misspelled "specified" and "occurred" in documentation and
comments.
Signed-off-by: Marlon Rac Cambasis <marlonrc08@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
Because the hook runs after the main checkout operation finishes, it
cannot affect what branch will be the current branch, what paths are
updated in the working tree, etc., which was described as "cannot
affect the outcome of 'checkout'".
However, the exit status of the hook is used as the exit status of
the 'checkout' command and is observable by anybody who spawned the
'checkout', which was missing from the documentation. Fix this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource some of the ref updates to the new "proc-receive" hook.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "reference transaction" hook was introduced in commit 6754159767
(refs: implement reference transaction hook, 2020-06-19). The name of
the hook is declared as "reference-transaction" in "refs.c" and
testcases, but the name declared in "githooks.txt" is different.
Signed-off-by: Bojun Chen <bojun.cbj@alibaba-inc.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The low-level reference transactions used to update references are
currently completely opaque to the user. While certainly desirable in
most usecases, there are some which might want to hook into the
transaction to observe all queued reference updates as well as observing
the abortion or commit of a prepared transaction.
One such usecase would be to have a set of replicas of a given Git
repository, where we perform Git operations on all of the repositories
at once and expect the outcome to be the same in all of them. While
there exist hooks already for a certain subset of Git commands that
could be used to implement a voting mechanism for this, many others
currently don't have any mechanism for this.
The above scenario is the motivation for the new "reference-transaction"
hook that reaches directly into Git's reference transaction mechanism.
The hook receives as parameter the current state the transaction was
moved to ("prepared", "committed" or "aborted") and gets via its
standard input all queued reference updates. While the exit code gets
ignored in the "committed" and "aborted" states, a non-zero exit code in
the "prepared" state will cause the transaction to be aborted
prematurely.
Given the usecase described above, a voting mechanism can now be
implemented via this hook: as soon as it gets called, it will take all
of stdin and use it to cast a vote to a central service. When all
replicas of the repository agree, the hook will exit with zero,
otherwise it will abort the transaction by returning non-zero. The most
important upside is that this will catch _all_ commands writing
references at once, allowing to implement strong consistency for
reference updates via a single mechanism.
In order to test the impact on the case where we don't have any
"reference-transaction" hook installed in the repository, this commit
introduce two new performance tests for git-update-refs(1). Run against
an empty repository, it produces the following results:
Test origin/master HEAD
--------------------------------------------------------------------
1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4%
1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0%
The performance test p1400.2 creates, updates and deletes a branch a
thousand times, thus averaging runtime of git-update-refs over 3000
invocations. p1400.3 instead calls `git-update-refs --stdin` three times
and queues a thousand creations, updates and deletes respectively.
As expected, p1400.3 consistently shows no noticeable impact, as for
each batch of updates there's a single call to access(3P) for the
negative hook lookup. On the other hand, for p1400.2, one can see an
impact caused by this patchset. But doing five runs of the performance
tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead
ranged from -1.5% to +1.1%. These inconsistent performance numbers can
be explained by the overhead of spawning 3000 processes. This shows that
the overhead of assembling the hook path and executing access(3P) once
to check if it's there is mostly outweighed by the operating system's
overhead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" learned four new hooks and also "--no-verify" option to
bypass them (and the existing "p4-pre-submit" hook).
* bk/p4-pre-edit-changelist:
git-p4: add RCS keyword status message
git-p4: add p4 submit hooks
git-p4: restructure code in submit
git-p4: add --no-verify option
git-p4: add p4-pre-submit exit text
git-p4: create new function run_git_hook
git-p4: rewrite prompt to be Windows compatible
|
|
The git command "commit" supports a number of hooks that support
changing the behavior of the commit command. The git-p4.py program only
has one existing hook, "p4-pre-submit". This command occurs early in
the process. There are no hooks in the process flow for modifying
the P4 changelist text programmatically.
Adds 3 new hooks to git-p4.py to the submit option.
The new hooks are:
* p4-prepare-changelist - Execute this hook after the changelist file
has been created. The hook will be executed even if the
--prepare-p4-only option is set. This hook ignores the --no-verify
option in keeping with the existing behavior of git commit.
* p4-changelist - Execute this hook after the user has edited the
changelist. Do not execute this hook if the user has selected the
--prepare-p4-only option. This hook will honor the --no-verify,
following the conventions of git commit.
* p4-post-changelist - Execute this hook after the P4 submission process
has completed successfully. This hook takes no parameters and is
executed regardless of the --no-verify option. It's return value will
not be checked.
The calls to the new hooks: p4-prepare-changelist, p4-changelist,
and p4-post-changelist should all be called inside the try-finally
block.
Signed-off-by: Ben Keene <seraphire@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new command line option --no-verify:
Add a new command line option "--no-verify" to the Submit command of
git-p4.py. This option will function in the spirit of the existing
--no-verify command line option found in git commit. It will cause the
P4 Submit function to ignore the existing p4-pre-submit.
Change the execution of the existing trigger p4-pre-submit to honor the
--no-verify option. Before exiting on failure of this hook, display
text to the user explaining which hook has failed and the impact
of using the --no-verify option.
Change the call of the p4-pre-submit hook to use the new run_git_hook
function. This is in preparation of additional hooks to be added.
Signed-off-by: Ben Keene <seraphire@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new config value for core.fsmonitorHookVersion was added to be able
to force the version of the fsmonitor hook. Possible values are 1 or 2.
When this is not set the code will use a value of -1 and attempt to use
version 2 of the hook first and if that fails will attempt version 1.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Start discouraging the use of "git filter-branch".
* en/filter-branch-deprecation:
t9902: use a non-deprecated command for testing
Recommend git-filter-repo instead of git-filter-branch
t6006: simplify, fix, and optimize empty message test
|
|
filter-branch suffers from a deluge of disguised dangers that disfigure
history rewrites (i.e. deviate from the deliberate changes). Many of
these problems are unobtrusive and can easily go undiscovered until the
new repository is in use. This can result in problems ranging from an
even messier history than what led folks to filter-branch in the first
place, to data loss or corruption. These issues cannot be backward
compatibly fixed, so add a warning to both filter-branch and its manpage
recommending that another tool (such as filter-repo) be used instead.
Also, update other manpages that referenced filter-branch. Several of
these needed updates even if we could continue recommending
filter-branch, either due to implying that something was unique to
filter-branch when it applied more generally to all history rewriting
tools (e.g. BFG, reposurgeon, fast-import, filter-repo), or because
something about filter-branch was used as an example despite other more
commonly known examples now existing. Reword these sections to fix
these issues and to avoid recommending filter-branch.
Finally, remove the section explaining BFG Repo Cleaner as an
alternative to filter-branch. I feel somewhat bad about this,
especially since I feel like I learned so much from BFG that I put to
good use in filter-repo (which is much more than I can say for
filter-branch), but keeping that section presented a few problems:
* In order to recommend that people quit using filter-branch, we need
to provide them a recomendation for something else to use that
can handle all the same types of rewrites. To my knowledge,
filter-repo is the only such tool. So it needs to be mentioned.
* I don't want to give conflicting recommendations to users
* If we recommend two tools, we shouldn't expect users to learn both
and pick which one to use; we should explain which problems one
can solve that the other can't or when one is much faster than
the other.
* BFG and filter-repo have similar performance
* All filtering types that BFG can do, filter-repo can also do. In
fact, filter-repo comes with a reimplementation of BFG named
bfg-ish which provides the same user-interface as BFG but with
several bugfixes and new features that are hard to implement in
BFG due to its technical underpinnings.
While I could still mention both tools, it seems like I would need to
provide some kind of comparison and I would ultimately just say that
filter-repo can do everything BFG can, so ultimately it seems that it
is just better to remove that section altogether.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Analogous to commit, introduce a '--no-verify' option which bypasses the
pre-merge-commit hook. The shorthand '-n' is taken by '--no-stat'
already.
[js: * reworded commit message to reflect current state of --no-stat flag
and new hook name
* fixed flag documentation to reflect new hook name
* cleaned up trailing whitespace
* squashed test changes from the original series' patch 4/4
* modified tests to follow pattern from this series' patch 1/4
* added a test case for --no-verify with non-executable hook
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-merge does not honor the pre-commit hook when doing automatic merge
commits, and for compatibility reasons this is going to stay.
Introduce a pre-merge-commit hook which is called for an automatic merge
commit just like pre-commit is called for a non-automatic merge commit
(or any other commit).
[js: * renamed hook from "pre-merge" to "pre-merge-commit"
* only discard the index if the hook is actually present
* expanded githooks documentation entry
* clarified that hook should write messages to stderr
* squashed test changes from the original series' patch 4/4
* modified tests to follow new pattern from this series' patch 1/4
* added a test case for non-executable merge hooks
* added a test case for failed merges
* when testing that the merge hook did not run, make sure we
actually have a merge to perform (by resetting the "side" branch
to its original state).
* reworded commit message
]
Improved-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default pre-commit script checks the config variable
"hooks.allownonascii" to determine whether to allow non-ASCII file
names -- mention this in "man githooks", just as the section on
"update" mentions the use of "hooks.allowunannotated".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `p4-pre-submit` hook is executed before git-p4 submits code.
If the hook exits with non-zero value, submit process not start.
Signed-off-by: Chen Bin <chenbin.sh@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typeset commands and similar things with as `git foo` instead of
'git foo' or 'git-foo' and add linkgit to the commands which run
the hooks.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
|
|
Doc update.
* jc/receive-pack-hook-doc:
hooks doc: clarify when receive-pack invokes its hooks
|
|
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The text meant to say that receive-pack runs these hooks, and only
because receive-pack is not a command the end users use every day
(ever), as an explanation also meantioned that it is run in response
to 'git push', which is an end-user facing command readers hopefully
know about.
This unfortunately gave an incorrect impression that 'git push'
always result in the hook to run. If the refs push wanted to update
all already had the desired value, these hooks are not run.
Explicitly mention "... and updates reference(s)" as a precondition
to avoid this confusion.
Helped-by: Christoph Michelbach <michelbach94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
|
|
This includes the core.fsmonitor setting, the fsmonitor integration hook,
and the fsmonitor index extension.
Also add documentation for the new fsmonitor options to ls-files and
update-index.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As "git commit" to conclude a conflicted "git merge" honors the
commit-msg hook, "git merge" that records a merge commit that
cleanly auto-merges should, but it didn't.
* sb/merge-commit-msg-hook (2017-09-22) 1 commit
(merged to 'next' on 2017-09-25 at 096e0502a8)
+ Documentation/githooks: mention merge in commit-msg hook
Add documentation for a topic that has recently graduated to the
'master' branch.
* sb/merge-commit-msg-hook:
Documentation/githooks: mention merge in commit-msg hook
|
|
The commit-msg hook is invoked by both commit and merge now.
Reported-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
|
|
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a simple example that replaces an outdated example
that was removed. This ensures that there's at the least
a simple example that illustrates what could be done
using the hook just by enabling it.
Also, update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare the 'preare-commit-msg' sample script for
upcoming changes. Preparation includes removal of
an example that has outlived it's purpose. The example
is the one that comments the "Conflicts:" part of a
merge commit message. It isn't relevant anymore as
it's done by default since 261f315b ("merge & sequencer:
turn "Conflicts:" hint into a comment", 2014-08-28).
Further update the relevant comments from the sample script
and update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, send-email has support for rudimentary e-mail validation.
Allow the user to add support for more validation by providing a
sendemail-validate hook.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sr/hooks-cwd-doc:
githooks.txt: clarify push hooks are always executed in $GIT_DIR
|
|
Listing the specific hooks might feel verbose but without it the
reader is left to wonder which hooks are triggered during the
push. Something which is not immediately obvious when only trying
to find out where the hook is executed.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) changed the underlying
details of how we take in objects. This is mostly
transparent to the user, but there are a few things they
might notice. Let's document them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change:
* Sentences that needed "the" or "a" to either add those or change them
so they don't need them.
* The little tangent about "You can use this to do X (if your project
wants to do X)" can just be shortened to "if you want to do X".
* s/parameter/parameters/ when the plural made more sense.
Most of this goes all the way back to the initial introduction of
hooks.txt in 6d35cc76 (Document hooks., 2005-09-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Any ACL you implement via an 'update' hook isn't actual access control
if the user has login access to the machine running git, because they
can trivially just build their own version of Git which doesn't run the
hook.
Change the documentation to take this dangerous edge case into account,
and remove the mention of the advice originating on the mailing list,
the users reading this don't care where the idea came up.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the documentation so that:
* We don't talk about "little scripts". Hooks can be as big as you
want, and don't have to be scripts, just call them "programs".
* We note that we change the working directory before a hook is called,
nothing documented this explicitly, but the current behavior is
predictable. It helps a lot to know what directory these hooks will
be executed from.
* We don't make claims about the example hooks which may not be true
depending on the configuration of 'init.templateDir'. Clarify that
we're talking about the default settings of git-init in those cases,
and move some of this documentation into git-init's documentation
about the default templates.
* We briefly note in the intro that hooks can get their arguments in
various different ways, and that how exactly is described below for
each hook.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Patrick Steinhardt
Thomas Ackermann
Junio C Hamano
Marlon Rac Cambasis
Bradley M. Kuhn
Jiang Xin
Bojun Chen
Ben Keene
Kevin Willford
Elijah Newren
Michael J Gruber
Nguyễn Thái Ngọc Duy
Robert P. J. Day
Ben Peart
Chen Bin
Andreas Heiduk
Eric Sunshine
Stefan Beller
Martin Ågren
Kaartic Sivaraam
Jonathan Tan
Simon Ruderich
Jeff King
Ævar Arnfjörð Bjarmason
Matthieu Moy