| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The slides for the Linux-mentoring presentation are no
longer available. Let's point to the wayback version of the
page, which works.
Note that the referenced diagram is also available on page
15 of [1]. We could link to that instead, but it's not clear
from the URL scheme ("uploads") whether it's going to stick
around forever.
[1] https://www.linuxfoundation.jp/jp_uploads/seminar20070313/Randy.pdf
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc clean-up.
* sb/doc-unify-bottom:
Documentation: unify bottom "part of git suite" lines
|
|
We currently have 168 man pages that mention they are part of Git, you
can check yourself easily via:
$ git grep "Part of the linkgit:git\[1\] suite" |wc -l
168
However some have a trailing period, i.e.
$ git grep "Part of the linkgit:git\[1\] suite." |wc -l
8
Unify the bottom line in all man pages to not end with a period.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
What was intended was perhaps "... plumbing does for you" ("you" added), but
simply omitting the word "for" is more terse and gets the intended point across
just as well, if not more so.
I originally went with the approach of writing "for you", but Junio C
Hamano suggested this approach instead.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By adding the word "just", which might have been accidentally omitted.
Adding the word "just" makes it clear that the point is to *not* do an
octopus merge simply because you *can* do it. In other words, you
should have a reason for doing it beyond simply having two (seemingly)
independent commits that you need to merge into another branch, since
it's not always the best approach.
The previous sentence made it look more like it was trying to say that
you shouldn't do an octopus merge *because* you can do an octopus merge.
Although this interpretation doesn't make sense and the rest of the
paragraph makes the intended meaning clear, this adjustment should make
the intent of the sentence more immediately clear to the reader.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using the command 'git clone' as a verb, use "run" as the
verb indicating the action of executing the command 'git clone'.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add definite and indefinite articles in three places where they were
missing.
- Use "the" in front of a directory name
- Use "the" in front of "style of cooperation"
- Use an indefinite article in front of "CVS background"
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-over-rsync protocol is inefficient and broken, and
has been for a long time. It transfers way more objects than
it needs (grabbing all of the remote's "objects/",
regardless of which objects we need). It does its own ad-hoc
parsing of loose and packed refs from the remote, but
doesn't properly override packed refs with loose ones,
leading to garbage results (e.g., expecting the other side
to have an object pointed to by a stale packed-refs entry,
or complaining that the other side has two copies of the
refs[1]).
This latter breakage means that nobody could have
successfully pulled from a moderately active repository
since cd547b4 (fetch/push: readd rsync support, 2007-10-01).
We never made an official deprecation notice in the release
notes for git's rsync protocol, but the tutorial has marked
it as such since 914328a (Update tutorial., 2005-08-30).
And on the mailing list as far back as Oct 2005, we can find
Junio mentioning it as having "been deprecated for quite
some time."[2,3,4]. So it was old news then; cogito had
deprecated the transport in July of 2005[5] (though it did
come back briefly when Linus broke git-http-pull!).
Of course some people professed their love of rsync through
2006, but Linus clarified in his usual gentle manner[6]:
> Thanks! This is why I still use rsync, even though
> everybody and their mother tells me "Linus says rsync is
> deprecated."
No. You're using rsync because you're actively doing
something _wrong_.
The deprecation sentiment was reinforced in 2008, with a
mention that cloning via rsync is broken (with no fix)[7].
Even the commit porting rsync over to C from shell (cd547b4)
lists it as deprecated! So between the 10 years of informal
warnings, and the fact that it has been severely broken
since 2007, it's probably safe to simply remove it without
further deprecation warnings.
[1] http://article.gmane.org/gmane.comp.version-control.git/285101
[2] http://article.gmane.org/gmane.comp.version-control.git/10093
[3] http://article.gmane.org/gmane.comp.version-control.git/17734
[4] http://article.gmane.org/gmane.comp.version-control.git/18911
[5] http://article.gmane.org/gmane.comp.version-control.git/5617
[6] http://article.gmane.org/gmane.comp.version-control.git/19354
[7] http://article.gmane.org/gmane.comp.version-control.git/103635
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A literal block in the tutorial had lines with unequal lengths to
delimit it from the rest of the document, which choke GitHub's
AsciiDoc renderer.
* ja/tutorial-asciidoctor-fix:
doc: fix unmatched code fences
|
|
This mismatch upsets the renderer on git-scm.com.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "Everyday GIT With 20 Commands Or So" is not accessible via the
Git help system. Move everyday.txt to giteveryday.txt so that "git
help everyday" works, and create a new placeholder file everyday.html
to refer people who follow existing URLs to the updated location.
giteveryday.txt now formats well with AsciiDoc as a man page and
refreshed content to a more command modern style.
Add 'everyday' to the help --guides list and update git(1) and 5
other links to giteveryday.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turns out that putting 'link:' before the 'http' is actually superfluous
in AsciiDoc, as there's already a predefined macro to handle it.
"http, https, [etc] URLs are rendered using predefined inline macros."
http://www.methods.co.nz/asciidoc/userguide.html#_urls
"Hypertext links to files on the local file system are specified
using the link inline macro."
http://www.methods.co.nz/asciidoc/userguide.html#_linking_to_local_documents
Despite being superfluous, the reference implementation of AsciiDoc
tolerates the extra 'link:' and silently removes it, giving a functioning
link in the generated HTML. However, AsciiDoctor (the Ruby implementation
of AsciiDoc used to render the http://git-scm.com/ site) does /not/ have
this behaviour, and so generates broken links, as can be seen here:
http://git-scm.com/docs/git-cvsimport (links to cvs2git & parsecvs)
http://git-scm.com/docs/git-filter-branch (link to The BFG)
It's worth noting that after this change, the html generated by 'make html'
in the git project is identical, and all links still work.
Signed-off-by: Roberto Tyley <roberto.tyley@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back when the core tutorial was written, `log` and `whatchanged`
were scripted Porcelains. In the "Inspecting Changes" section that
talks about the plumbing commands in the diff family, it made sense
to use `log` and `whatchanged` as good examples of the use of these
plumbing commands, and because even these scripted Porcelains were
novelty (there wasn't the new end-user tutorial written), it made
some sense to illustrate uses of the `git log` (and `git
whatchanged`) scripted Porcelain commands.
But we no longer have scripted `log` and `whatchanged` to serve as
examples, and this document is not where the end users learn what
`git log` command is about. Stop at briefly mentioning the
possibility of combining rev-list with diff-tree to build your own
log, and leave the end-user documentation of `log` to the new
tutorial and the user manual.
Also resurrect the last version of `git-log`, `git-whatchanged`, and
`git-show` to serve as examples to contrib/examples/ directory.
While at it, remove 'whatchanged' from a list of sample commands
that are affected by GIT_FLUSH environment variable. This is not
meant to be an exhaustive list but as a list of typical ones, and an
old command that is kept primarily for backward compatibility does
not belong to it.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Spend only minimum number of columns necessary to show the number of lines
in the output from "diff --stat", instead of always allocating 4 columns
even when showing changes that are much smaller than 1000 lines.
By Zbigniew Jędrzejewski-Szmek
* zj/diff-stat-smaller-num-columns:
diff --stat: use less columns for change counts
|
|
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at it:
- remove some single-quotes that were being rendered as ’\n\';
- do not escape ellipses (...) when they do not represent the
literal three characters "...". We may want to ensure the
manpages render these as three ASCII periods to make the
manual pages easier to search, but that would be a global
output generation setting, not a context-specific thing;
Reported-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
|
|
Back when the git core tutorial was written, porcelain commands were
shell scripts. This patch adds a paragraph explaining this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
* maint:
help: Do not unnecessarily look for a repository
Documentation: Fix a few i.e./e.g. mix-ups
Documentation: Document --branch option in git clone synopsis
|
|
A git bundle can be transported by several means (such as e-mail), not
only by snekaernet, so use e.g. instead of i.e.
The mix-up in git-bundle.txt is obvious.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/tutorial-test:
t1200: prepare for merging with Fast-forward bikeshedding
t1200: further modernize test script style
t1200: Make documentation and test agree
t1200: cleanup and modernize test style
|
|
There were some differences between t1200 and the gitcore-tutorial. Add
missing tests for manually merging two branches, and use the same
commands in both files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a compound word.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't confuse the user with old git messages.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Also add a few links to git-help(1) in "See also" sections.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The post-update hook, which is required to be enabled in order for
the repository to be accessible over HTTP, is not enabled by
chmod a+x anymore, but instead by dropping the .sample suffix.
This patch emphasizes this change in the release notes (since
I believe this is rather noticeable backwards-incompatible change).
It also adjusts the documentation which still described the old way
and fixes t/t5540-http-push.sh, which was broken for 1.5 month
but apparently noone ever runs this test.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I think that some of these uses of italics were meant to be
rendered in quotation marks, anyway.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Italicize those git subcommand names already in teletype we missed.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name `gitk` is sometimes meant to be entered at the command
prompt, but most uses are just referring to the program with that
name (not the incantation to start it).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Stefan Beller
Kristoffer Haugsbakk
Matthieu Moy
Jean-Noel Avila
Philip Oakley
Roberto Tyley
Thomas Ackermann
Jeremy White
Zbigniew Jędrzejewski-Szmek
Nguyễn Thái Ngọc Duy
Jonathan Nieder
Michael J Gruber
Ramkumar Ramachandra
Thomas Rast
Nanako Shiraishi
Stephen Boyd
Felipe Contreras
Ori Avtalion
Jon Loeliger
Markus Heidelberg
Christian Couder
Petr Baudis
Eric Hanchrow
Jonathan Nieder