summaryrefslogtreecommitdiff
path: root/Documentation/gitcore-tutorial.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-10-13Documentation: gitrevisions is in section 7Libravatar Jonathan Nieder1-1/+1
Fix references to gitrevisions(1) in the manual pages and HTML documentation. In practice, this will not matter much unless someone tries to use a hard copy of the git reference manual. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-20Documentation: avoid stray backslashes in core tutorialLibravatar Jonathan Nieder1-9/+9
While at it: - remove some single-quotes that were being rendered as ’\n\'; - do not escape ellipses (...) when they do not represent the literal three characters "...". We may want to ensure the manpages render these as three ASCII periods to make the manual pages easier to search, but that would be a global output generation setting, not a context-specific thing; Reported-by: Frédéric Brière <fbriere@fbriere.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Documentation: link to gitrevisions rather than git-rev-parseLibravatar Michael J Gruber1-1/+1
Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge remote branch 'remotes/trast-doc/for-next'Libravatar Junio C Hamano1-80/+80
* remotes/trast-doc/for-next: Documentation: spell 'git cmd' without dash throughout Documentation: format full commands in typewriter font Documentation: warn prominently against merging with dirty trees Documentation/git-merge: reword references to "remote" and "pull" Conflicts: Documentation/config.txt Documentation/git-config.txt Documentation/git-merge.txt
2010-01-16Documentation: Update git core tutorial clarifying reference to scriptsLibravatar Ramkumar Ramachandra1-0/+8
Back when the git core tutorial was written, porcelain commands were shell scripts. This patch adds a paragraph explaining this. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-80/+80
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-12-01Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: help: Do not unnecessarily look for a repository Documentation: Fix a few i.e./e.g. mix-ups Documentation: Document --branch option in git clone synopsis
2009-12-01Documentation: Fix a few i.e./e.g. mix-upsLibravatar Michael J Gruber1-1/+1
A git bundle can be transported by several means (such as e-mail), not only by snekaernet, so use e.g. instead of i.e. The mix-up in git-bundle.txt is obvious. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-25t1200: fix a timing dependent errorLibravatar Nanako Shiraishi1-2/+2
The fourth test of show-branch in t1200 test was failing but only sometimes. It only failed when two commits created in an earlier test had different timestamps. When they were created within the same second, the actual output matched the expected output. Fix this by using test_tick to force reliable timestamps and update the expected output so it does not to depend on the commits made in the same sacond. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-17Merge branch 'sb/tutorial-test'Libravatar Junio C Hamano1-10/+10
* sb/tutorial-test: t1200: prepare for merging with Fast-forward bikeshedding t1200: further modernize test script style t1200: Make documentation and test agree t1200: cleanup and modernize test style
2009-11-06t1200: Make documentation and test agreeLibravatar Stephen Boyd1-10/+10
There were some differences between t1200 and the gitcore-tutorial. Add missing tests for manually merging two branches, and use the same commands in both files. Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-24Use 'fast-forward' all over the placeLibravatar Felipe Contreras1-2/+2
It's a compound word. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-12Change mentions of "git programs" to "git commands"Libravatar Ori Avtalion1-2/+2
Most of the docs and printouts refer to "commands" when discussing what the end users call via the "git" top-level program. We should refer them as "git programs" when we discuss the fact that the commands are implemented as separate programs, but in other contexts, it is better to use the term "git commands" consistently. Signed-off-by: Ori Avtalion <ori@avtalion.name> Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-13Fix Documentation typos surrounding the word 'handful'.Libravatar Jon Loeliger1-4/+4
Some instances replaced by "handful of", others use the word "few", a couple get a slight rewording. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Merge branch 'maint' to sync with GIT 1.6.0.6Libravatar Junio C Hamano1-4/+4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Documentation: fix typos, grammar, asciidoc syntaxLibravatar Markus Heidelberg1-4/+4
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Documentation: sync example output with git outputLibravatar Markus Heidelberg1-6/+5
Don't confuse the user with old git messages. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-17Documentation: tutorial: add information about "git help" at the beginningLibravatar Christian Couder1-0/+1
Talking about "git help" is useful because it has a few more features (like when using it without arguments or with "-a") and it may work on non unix like platforms. Also add a few links to git-help(1) in "See also" sections. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-14Documentation: fix links to "everyday.html"Libravatar Christian Couder1-2/+4
In some places the links are wrong. They should be: "link:everyday.html", instead of: "linkgit:everyday[7]". This patch fixes that. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-11Adjust for the new way of enabling the default post-update hookLibravatar Petr Baudis1-7/+8
The post-update hook, which is required to be enabled in order for the repository to be accessible over HTTP, is not enabled by chmod a+x anymore, but instead by dropping the .sample suffix. This patch emphasizes this change in the release notes (since I believe this is rather noticeable backwards-incompatible change). It also adjusts the documentation which still described the old way and fixes t/t5540-http-push.sh, which was broken for 1.5 month but apparently noone ever runs this test. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-08Documentation: fix broken "linkgit" linksLibravatar Eric Hanchrow1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: use teletype font for sample command linesLibravatar Jonathan Nieder1-1/+1
I think that some of these uses of italics were meant to be rendered in quotation marks, anyway. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git subcommand names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
Italicize those git subcommand names already in teletype we missed. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize nongit command names (if they are in teletype font)Libravatar Jonathan Nieder1-7/+7
Some manual pages use teletype font to set command names. We change them to use italics, instead. This creates a visual distinction between names of commands and command lines that can be typed at the command line. It is also more consistent with other man pages outside Git. In this patch, the commands named are non-git commands like bash. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize gitk's name (where it was in teletype font)Libravatar Jonathan Nieder1-1/+1
The name `gitk` is sometimes meant to be entered at the command prompt, but most uses are just referring to the program with that name (not the incantation to start it). Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-81/+81
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05Documentation: more "git-" versus "git " changesLibravatar Jonathan Nieder1-15/+15
With git-commands moving out of $(bindir), it is useful to make a clearer distinction between the git subcommand 'git-whatever' and the command you type, `git whatever <options>`. So we use a dash after "git" when referring to the former and not the latter. I already sent a patch doing this same thing, but I missed some spots. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-9/+9
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-51/+51
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: fix links to tutorials and other new manual pagesLibravatar Jonathan Nieder1-5/+4
With the conversion of HTML documentation to man pages tutorial.html -> gittutorial (7) tutorial-2.html -> gittutorial-2 (7) cvs-migration.html -> gitcvs-migration (7) diffcore.html -> gitdiffcore (7) repository-layout.html -> gitrepository-layout (5) hooks.html -> githooks (5) glossary.html -> gitglossary (7) core-tutorial.html -> gitcore-tutorial (7) and the automatic update of references to these pages, a little debris was left behind. We clear it away. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: convert "diffcore" and "repository-layout" to man pagesLibravatar Christian Couder1-1/+1
This patch renames the following documents and at the same time converts them to the man format: diffcore.txt -> gitdiffcore.txt (man section 7) repository-layout.txt -> gitrepository-layout.txt (man section 5) Other documents that reference the above ones are changed accordingly. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-01Documentation: convert "glossary" and "core-tutorial" to man pagesLibravatar Christian Couder1-0/+1699
This patch renames the following documents and at the same time converts them to the man format: core-tutorial.txt -> gitcore-tutorial.txt glossary.txt -> gitglossary.txt But as the glossary is included in the user manual and as the new gitglossary man page cannot be included as a whole in the user manual, the actual glossary content is now in its own "glossary-content.txt" new file. And this file is included by both the user manual and the gitglossary man page. Other documents that reference the above ones are changed accordingly and sometimes improved a little too. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>