| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The Linux kernel receives many patches to the devicetree files each
release. The hunk header for those patches typically show nothing,
making it difficult to figure out what node is being modified without
applying the patch or opening the file and seeking to the context. Let's
add a builtin 'dts' pattern to git so that users can get better diff
output on dts files when they use the diff=dts driver.
The regex has been constructed based on the spec at devicetree.org[1]
and with some help from Johannes Sixt.
[1] https://github.com/devicetree-org/devicetree-specification/releases/latest
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
The pattern "git diff/grep" use to extract funcname and words
boundary for Rust has been added.
* ml/userdiff-rust:
userdiff: two simplifications of patterns for rust
userdiff: add built-in pattern for rust
|
|
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Octave pattern is almost the same as matlab, except
that '%%%' and '##' can also be used to begin code sections,
in addition to '%%' that is understood by both. Octave
pattern is merged into Matlab pattern. Test cases for
the hunk header patterns of matlab and octave under
t/t4018 are added.
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds xfuncname and word_regex patterns for Rust, a quite
popular programming language. It also includes test cases for the
xfuncname regex (t4018) and updated documentation.
The word_regex pattern finds identifiers, integers, floats and
operators, according to the Rust Reference Book.
Cc: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofixes.
* ab/doc-misc-typofixes:
doc: fix typos in man pages
|
|
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Blesius <alexander+git@blesius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* yb/utf-16le-bom-spellfix:
gitattributes.txt: fix typo
|
|
These tabs happen to appear in columns where they don't stand out too
much, so the diff here is non-obvious. Some of these are rendered
differently by AsciiDoc and Asciidoctor (although the difference might
be invisible!), which is how I found a few of them. The remainder were
found using `git grep "[a-zA-Z.,)]$TAB[a-zA-Z]"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`UTF-16-LE-BOM` to `UTF-16LE-BOM`.
this closes https://github.com/git-for-windows/git/issues/2095
Signed-off-by: Yash Bhatambare <ybhatambare@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation around core.crlf has been updated.
* jk/autocrlf-overrides-eol-doc:
docs/config: clarify "text property" in core.eol
doc/gitattributes: clarify "autocrlf overrides eol"
|
|
Users who want UTF-16 files in the working tree set the .gitattributes
like this:
test.txt working-tree-encoding=UTF-16
The unicode standard itself defines 3 allowed ways how to encode UTF-16.
The following 3 versions convert all back to 'g' 'i' 't' in UTF-8:
a) UTF-16, without BOM, big endian:
$ printf "\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
b) UTF-16, with BOM, little endian:
$ printf "\377\376g\000i\000t\000" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
c) UTF-16, with BOM, big endian:
$ printf "\376\377\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
Git uses libiconv to convert from UTF-8 in the index into ITF-16 in the
working tree.
After a checkout, the resulting file has a BOM and is encoded in "UTF-16",
in the version (c) above.
This is what iconv generates, more details follow below.
iconv (and libiconv) can generate UTF-16, UTF-16LE or UTF-16BE:
d) UTF-16
$ printf 'git' | iconv -f UTF-8 -t UTF-16 | od -c
0000000 376 377 \0 g \0 i \0 t
e) UTF-16LE
$ printf 'git' | iconv -f UTF-8 -t UTF-16LE | od -c
0000000 g \0 i \0 t \0
f) UTF-16BE
$ printf 'git' | iconv -f UTF-8 -t UTF-16BE | od -c
0000000 \0 g \0 i \0 t
There is no way to generate version (b) from above in a Git working tree,
but that is what some applications need.
(All fully unicode aware applications should be able to read all 3 variants,
but in practise we are not there yet).
When producing UTF-16 as an output, iconv generates the big endian version
with a BOM. (big endian is probably chosen for historical reasons).
iconv can produce UTF-16 files with little endianess by using "UTF-16LE"
as encoding, and that file does not have a BOM.
Not all users (especially under Windows) are happy with this.
Some tools are not fully unicode aware and can only handle version (b).
Today there is no way to produce version (b) with iconv (or libiconv).
Looking into the history of iconv, it seems as if version (c) will
be used in all future iconv versions (for compatibility reasons).
Solve this dilemma and introduce a Git-specific "UTF-16LE-BOM".
libiconv can not handle the encoding, so Git pick it up, handles the BOM
and uses libiconv to convert the rest of the stream.
(UTF-16BE-BOM is added for consistency)
Rported-by: Adrián Gimeno Balaguer <adrigibal@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We only override core.eol with core.autocrlf when the latter is set to
something besides "false". Let's make this more clear, and point the
reader to the git-config definitions, which discuss this in more detail.
Noticed-by: Sergey Lukashev <lukashev.s@ya.ru>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
|
|
Doc formatting fix.
* nd/doc-header:
doc: keep first level section header in upper case
|
|
The help command currently hard codes the list of guides and their
summary in C. Let's move this list to command-list.txt. This lets us
extract summary lines from Documentation/git*.txt. This also
potentially lets us list guides in git.txt, but I'll leave that for
now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
|
|
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
UTF supports lossless conversion round tripping and conversions between
UTF and other encodings are mostly round trip safe as Unicode aims to be
a superset of all other character encodings. However, certain encodings
(e.g. SHIFT-JIS) are known to have round trip issues [1].
Add 'core.checkRoundtripEncoding', which contains a comma separated
list of encodings, to define for what encodings Git should check the
conversion round trip if they are used in the 'working-tree-encoding'
attribute.
Set SHIFT-JIS as default value for 'core.checkRoundtripEncoding'.
[1] https://support.microsoft.com/en-us/help/170559/prb-conversion-problem-between-shift-jis-and-unicode
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git recognizes files encoded with ASCII or one of its supersets (e.g.
UTF-8 or ISO-8859-1) as text files. All other encodings are usually
interpreted as binary and consequently built-in Git text processing
tools (e.g. 'git diff') as well as most Git web front ends do not
visualize the content.
Add an attribute to tell Git what encoding the user has defined for a
given file. If the content is added to the index, then Git reencodes
the content to a canonical UTF-8 representation. On checkout Git will
reverse this operation.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* jk/attributes-path-doc:
doc/gitattributes: mention non-recursive behavior
|
|
The gitattributes documentation claims that the pattern
rules are largely the same as for gitignore. However, the
rules for recursion are different.
In an ideal world, we would make them the same (if for
nothing else than consistency and simplicity), but that
would create backwards compatibility issues. For some
discussion, see this thread:
https://public-inbox.org/git/slrnkldd3g.1l4.jan@majutsushi.net/
But let's at least document the differences instead of
actively misleading the user by claiming that they're the
same.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds xfuncname and word_regex patterns for golang, a quite
popular programming language. It also includes test cases for the
xfuncname regex (t4018) and updated documentation.
The xfuncname regex finds functions, structs and interfaces. Although
the Go language prohibits the opening brace from being on its own
line, the regex does not makes it mandatory, to be able to match
`func` statements like this:
func foo(bar int,
baz int) {
}
This is covered by the test case t4018/golang-long-func.
The word_regex pattern finds identifiers, integers, floats, complex
numbers and operators, according to the go specification.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Separating out the implementation of the handshake when starting a
long-running subprocess (for example, as is done for a clean/smudge
filter) was done in commit fa64a2fdbeed ("sub-process: refactor
handshake to common function", 2017-07-26), but its documentation still
resides in gitattributes. Split out the documentation as well.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting the `eol` attribute, paths can change their dirty status
without any change in the working directory. This can cause confusion
and should at least be mentioned with a remedy.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ls/filter-process-delayed:
convert: add "status=delayed" to filter process protocol
convert: refactor capabilities negotiation
convert: move multiple file filter error handling to separate function
convert: put the flags field before the flag itself for consistent style
t0021: write "OUT <size>" only on success
t0021: make debug log file name configurable
t0021: keep filter log files on comparison
|
|
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When illustrating how to normalize the line endings, the
documentation in gitattributes tells the user to `rm .git/index`.
This is incorrect for two reasons:
- Users shouldn't be instructed to mess around with the internal
implementation of Git using raw file system tools like `rm`.
- Within a submodule or an additional working tree `.git` is just a
file containing a `gitdir: <path>` pointer into the real `.git`
directory. Therefore `rm .git/index` does not work.
The purpose of the `rm .git/index` instruction is to remove all entries
from the index without touching the working tree. The way to do this
with Git is to use `read-tree --empty`.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* tb/doc-eol-normalization:
gitattributes.txt: document how to normalize the line endings
|
|
The instructions how to normalize the line endings should have been updated
as part of commit 6523728499e 'convert: unify the "auto" handling of CRLF',
(but that part never made it into the commit).
Update the documentation in Documentation/gitattributes.txt and add
a test case in t0025.
Reported by Kristian Adrup
https://github.com/git-for-windows/git/issues/954
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A pathname value in a clean/smudge filter process "key=value" pair can
contain the '=' character (introduced in edcc858). Make the user aware
of this issue in the docs, add a corresponding test case, and fix the
issue in filter process value parser of the example implementation in
contrib.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a simple pass-thru filter as example implementation for the Git
filter protocol version 2. See Documentation/gitattributes.txt, section
"Filter Protocol" for more info.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's clean/smudge mechanism invokes an external filter process for
every single blob that is affected by a filter. If Git filters a lot of
blobs then the startup time of the external filter processes can become
a significant part of the overall Git execution time.
In a preliminary performance test this developer used a clean/smudge
filter written in golang to filter 12,000 files. This process took 364s
with the existing filter mechanism and 5s with the new mechanism. See
details here: https://github.com/github/git-lfs/pull/1382
This patch adds the `filter.<driver>.process` string option which, if
used, keeps the external filter process running and processes all blobs
with the packet format (pkt-line) based protocol over standard input and
standard output. The full protocol is explained in detail in
`Documentation/gitattributes.txt`.
A few key decisions:
* The long running filter process is referred to as filter protocol
version 2 because the existing single shot filter invocation is
considered version 1.
* Git sends a welcome message and expects a response right after the
external filter process has started. This ensures that Git will not
hang if a version 1 filter is incorrectly used with the
filter.<driver>.process option for version 2 filters. In addition,
Git can detect this kind of error and warn the user.
* The status of a filter operation (e.g. "success" or "error) is set
before the actual response and (if necessary!) re-set after the
response. The advantage of this two step status response is that if
the filter detects an error early, then the filter can communicate
this and Git does not even need to create structures to read the
response.
* All status responses are pkt-line lists terminated with a flush
packet. This allows us to send other status fields with the same
protocol in the future.
Helped-by: Martin-Louis Bright <mlbright@gmail.com>
Reviewed-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the documentation about text=auto:
text=auto now follows the core.autocrlf handling when files are not
normalized in the repository.
For a cross platform project recommend the usage of attributes for
line-ending conversions.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A minor documentation update.
* jh/clean-smudge-f-doc:
clarify %f documentation
|
|
It's natural to expect %f to be an actual file on disk; help avoid that
mistake.
Signed-off-by: Joey Hess <joeyh@joeyh.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge" with renormalization did not work well with
merge-recursive, due to "safer crlf" conversion kicking in when it
shouldn't.
* jc/renormalize-merge-kill-safer-crlf:
merge: avoid "safer crlf" during recording of merge results
convert: unify the "auto" handling of CRLF
|
|
Before this change,
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
would have the same effect as
$ echo "* text" >.gitattributes
$ git config core.eol crlf
Since the 'eol' attribute had higher priority than 'text=auto', this may
corrupt binary files and is not what most users expect to happen.
Make the 'eol' attribute to obey 'text=auto' and now
$ echo "* text=auto" >.gitattributes
$ echo "* eol=crlf" >>.gitattributes
behaves the same as
$ echo "* text=auto" >.gitattributes
$ git config core.eol crlf
In other words,
$ echo "* text=auto eol=crlf" >.gitattributes
has the same effect as
$ git config core.autocrlf true
and
$ echo "* text=auto eol=lf" >.gitattributes
has the same effect as
$ git config core.autocrlf input
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CSS is widely used, motivating it being included as a built-in pattern.
It must be noted that the word_regex for CSS (i.e. the regex defining
what is a word in the language) does not consider '.' and '#' characters
(in CSS selectors) to be part of the word. This behavior is documented
by the test t/t4018/css-rule.
The logic behind this behavior is the following: identifiers in CSS
selectors are identifiers in a HTML/XML document. Therefore, the '.'/'#'
character are not part of the identifier, but an indicator of the nature
of the identifier in HTML/XML (class or id). Diffing ".class1" and
".class2" must show that the class name is changed, but we still are
selecting a class.
Logic behind the "pattern" regex is:
1. reject lines ending with a colon/semicolon (properties)
2. if a line begins with a name in column 1, pick the whole line
Credits to Johannes Sixt (j6t@kdbg.org) for the pattern regex and most
of the tests.
Signed-off-by: William Duclot <william.duclot@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for Fountain, a plain text screenplay format. Git
facilitates not just programming specifically, but creative writing
in general, so it makes sense to also support other plain text
documents besides source code.
In the structure of a screenplay specifically, scenes are roughly
analogous to functions, in the sense that it makes your job easier
if you can see which ones were changed in a given range of patches.
More information about the Fountain format can be found on its
official website, at http://fountain.io .
Signed-off-by: Zoë Blade <zoe@bytenoise.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
|
|
The interface to custom low-level merge driver was modeled to be
capable of driving programs like "merge" (from the RCS suite) that
can produce result solely by looking at three files that hold
contents of common ancestor, ours and theirs. The information we
feed to the external drivers via the command line placeholders %O,
%A, and %B were designed to be purely about contents by giving
names of the temporary files that hold these variants without
exposing the original pathname. No matter where the result goes,
merging the same three variants should produce the same result,
contents is the king, that is the Git way.
The external driver interface, however, is meant to help people to
step outside the Git worldview, and sometimes people want to know
the final path that the resulting merged contents would be stored
in. Expose this to the external drivers via a new placeholder %P.
Requested-by: Andreas Gondek
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Stephen Boyd
Junio C Hamano
Boxuan Li
Marc-André Lureau
Nguyễn Thái Ngọc Duy
Alexander Blesius
Martin Ågren
Yash Bhatambare
Torsten Bögershausen
Jeff King
Andreas Heiduk
Lars Schneider
Alban Gruin
Jonathan Tan
Ben Boeckel
Stefan Beller
Ville Skyttä
Joey Hess
William Duclot
Zoë Blade