summaryrefslogtreecommitdiff
path: root/Documentation/git.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-01-20Merge remote branch 'remotes/trast-doc/for-next'Libravatar Junio C Hamano1-4/+4
* remotes/trast-doc/for-next: Documentation: spell 'git cmd' without dash throughout Documentation: format full commands in typewriter font Documentation: warn prominently against merging with dirty trees Documentation/git-merge: reword references to "remote" and "pull" Conflicts: Documentation/config.txt Documentation/git-config.txt Documentation/git-merge.txt
2010-01-20Git 1.6.6.1Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'maint-1.6.5' into maintLibravatar Junio C Hamano1-1/+2
* maint-1.6.5: Git 1.6.5.8 Fix mis-backport of t7002 bash completion: factor submodules into dirty state reset: unbreak hard resets with GIT_WORK_TREE Conflicts: Documentation/git.txt GIT-VERSION-GEN RelNotes
2010-01-20Git 1.6.5.8Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-4/+4
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-12-23Git 1.6.6Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16Merge branch 'maint' to sync with 1.6.5.7Libravatar Junio C Hamano1-1/+2
* maint: Git 1.6.5.7 worktree: don't segfault with an absolute pathspec without a work tree ignore unknown color configuration help.autocorrect: do not run a command if the command given is junk Illustrate "filter" attribute with an example
2009-12-16Git 1.6.5.7Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-10Sync with 1.6.5.6Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-10Git 1.6.5.6Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05Sync with 1.6.5.5Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05Git 1.6.5.5Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-03Merge in 1.6.5.4Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-03Git 1.6.5.4Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-16Sync with 1.6.5.3Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-16Git 1.6.5.3Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-25Sync with 1.6.5.2Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-25GIT 1.6.5.2Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-23Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Fix list of released versions in the toc document Do not fail "describe --always" in a tag-less repository
2009-10-23Fix list of released versions in the toc documentLibravatar Junio C Hamano1-1/+1
2009-10-18Merge branch 'cc/replace-no-replace'Libravatar Junio C Hamano1-1/+5
* cc/replace-no-replace: git: add --no-replace-objects option to disable replacing
2009-10-16GIT 1.6.5.1Libravatar Junio C Hamano1-0/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-13git: add --no-replace-objects option to disable replacingLibravatar Christian Couder1-1/+5
Commit dae556b (environment: add global variable to disable replacement) adds a variable to enable/disable replacement, and it is enabled by default for most commands. So there is no way to disable it for some commands, which is annoying when we want to get information about a commit that has been replaced. For example: $ git cat-file -p N would output information about the replacement commit if commit N is replaced. With the "--no-replace-objects" option that this patch adds it is possible to get information about the original commit using: $ git --no-replace-objects cat-file -p N While at it, let's add some documentation about this new option in the "git replace" man page too. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-10GIT 1.6.5Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-16GIT 1.6.4.4Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-13GIT 1.6.4.3Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-29GIT 1.6.4.2Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-21GIT 1.6.4.1Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-12Merge branch 'maint-1.6.3' into maintLibravatar Junio C Hamano1-1/+1
* maint-1.6.3: Change mentions of "git programs" to "git commands" Documentation: merge: one <remote> is required help.c: give correct structure's size to memset()
2009-08-12Change mentions of "git programs" to "git commands"Libravatar Ori Avtalion1-1/+1
Most of the docs and printouts refer to "commands" when discussing what the end users call via the "git" top-level program. We should refer them as "git programs" when we discuss the fact that the commands are implemented as separate programs, but in other contexts, it is better to use the term "git commands" consistently. Signed-off-by: Ori Avtalion <ori@avtalion.name> Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29GIT 1.6.4Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29Sync with 1.6.3.4Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-21Sync with 1.6.3.3Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06Merge branch 'maint'Libravatar Junio C Hamano1-1/+4
* maint: Documentation: refer to gitworkflows(7) from tutorial and git(1) daemon: Strictly parse the "extra arg" part of the command
2009-06-06Documentation: refer to gitworkflows(7) from tutorial and git(1)Libravatar Thomas Rast1-1/+4
Add references to the gitworkflows(7) manpage added in f948dd8 (Documentation: add manpage about workflows, 2008-10-19) to both gittutorial(1) and git(1), so that new users might actually discover and read it. Noticed by Randal L. Schwartz. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-03Documentation/git.txt: update links to release notesLibravatar Junio C Hamano1-1/+6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-06GIT 1.6.3Libravatar Junio C Hamano1-1/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-12GIT 1.6.3-rc0Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-12Documentation/git.txt: GIT 1.6.2.2 has been out for a whileLibravatar Nanako Shiraishi1-1/+2
These links inside "stalenotes" section need to be updated on the master branch every time a new stable or maintenance release is made. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-04add --html-path to get the location of installed HTML docsLibravatar Markus Heidelberg1-1/+5
This can be used in GUIs to open installed HTML documentation in the browser. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-15Sync with GIT 1.6.2.1Libravatar Junio C Hamano1-1/+2
2009-03-03GIT 1.6.2Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-07GIT 1.6.2-rc0Libravatar Junio C Hamano1-1/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-25Sync with 1.6.1.1Libravatar Junio C Hamano1-1/+2
2008-12-24GIT 1.6.1Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Merge branch 'maint' to sync with GIT 1.6.0.6Libravatar Junio C Hamano1-4/+10
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-07Point "stale" 1.6.0.5 documentation from the main git documentation pageLibravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-12git.html: Update the links to stale versionsLibravatar Junio C Hamano1-1/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-12GIT 1.6.0.2Libravatar Junio C Hamano1-1/+3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-24Documentation: clarify pager configurationLibravatar Jonathan Nieder1-1/+2
The unwary user may not know how to disable the -FRSX options. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 02:52:49 +0000