| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When citing other Git commands, rather than merely formatting them with
a fixed-width typeface, improve the reader experience by linking to them
directly via `linkgit:`.
Suggested-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading the rendered description of `add`, it's easy to trip over
and miss the end of one sentence and the start of the next, making it
seem as if they are part of the same statement, separated only by a
dash:
... specific files such as HEAD, index, etc. - may also be
specified as <commit-ish>; it is synonymous with...
This can be particularly confusing since the thoughts expressed by the
two sentences are unrelated. Reduce the likelihood of confusion by
making it obvious that the two sentences are distinct.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a few grammatical problems to improve the reading experience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As originally composed, git-worktree.txt employed a mix of "worktree"
and "working tree" which was inconsistent and potentially confusing to
readers. bc483285b7 (Documentation/git-worktree: consistently use term
"linked working tree", 2015-07-20) undertook the task of employing the
term "working tree" consistently throughout the document and avoiding
"worktree" altogether for descriptive text. Since that time, some
instances of "worktree" have crept back in. Continue the work of
bc483285b7 by transforming these to "working tree", as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-worktree documentation generally does a good job of formatting
literal text using a fixed-width typeface, however, some instances of
unformatted literal text have crept in over time. Fix these.
While at it, also fix a few incorrect typefaces resulting from wrong
choice of Asciidoc quotes.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree add" takes special care to avoid creating a new worktree
at a location already registered to an existing worktree even if that
worktree is missing (which can happen, for instance, if the worktree
resides on removable media). "git worktree move", however, is not so
careful when validating the destination location and will happily move
the source worktree atop the location of a missing worktree. This leads
to the anomalous situation of multiple worktrees being associated with
the same path, which is expressly forbidden by design. For example:
$ git clone foo.git
$ cd foo
$ git worktree add ../bar
$ git worktree add ../baz
$ rm -rf ../bar
$ git worktree move ../baz ../bar
$ git worktree list
.../foo beefd00f [master]
.../bar beefd00f [bar]
.../bar beefd00f [baz]
$ git worktree remove ../bar
fatal: validation failed, cannot remove working tree:
'.../bar' does not point back to '.git/worktrees/bar'
Fix this shortcoming by enhancing "git worktree move" to perform the
same additional validation of the destination directory as done by "git
worktree add".
While at it, add a test to verify that "git worktree move" won't move a
worktree atop an existing (non-worktree) path -- a restriction which has
always been in place but was never tested.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Blesius <alexander+git@blesius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
|
|
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
|
|
Noticed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* ah/doc-updates:
doc: fix formatting in git-update-ref
doc: fix indentation of listing blocks in gitweb.conf.txt
doc: fix descripion for 'git tag --format'
doc: fix inappropriate monospace formatting
doc: fix ASCII art tab spacing
doc: clarify boundaries of 'git worktree list --porcelain'
|
|
Defined delimiters for 'git worktree list --porcelain' make the format
easier to parse in scripts. For example
sed -n '/^worktree ID$/,/^$/p'
extracts only the information for the worktree 'ID'.
The format did not changed since [1], only the guaranty is added.
[1] bb9c03b82a (worktree: add 'list' command, 2015-10-08)
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of the problems with multiple worktree is accessing per-worktree
refs of one worktree from another worktree. This was sort of solved by
multiple ref store, where the code can open the ref store of another
worktree and has access to the ref space of that worktree.
The problem with this is reporting. "HEAD" in another ref space is
also called "HEAD" like in the current ref space. In order to
differentiate them, all the code must somehow carry the ref store
around and print something like "HEAD from this ref store".
But that is not feasible (or possible with a _lot_ of work). With the
current design, we pass a reference around as a string (so called
"refname"). Extending this design to pass a string _and_ a ref store
is a nightmare, especially when handling extended SHA-1 syntax.
So we do it another way. Instead of entering a separate ref space, we
make refs from other worktrees available in the current ref space. So
"HEAD" is always HEAD of the current worktree, but then we can have
"worktrees/blah/HEAD" to denote HEAD from a worktree named
"blah". This syntax coincidentally matches the underlying directory
structure which makes implementation a bit easier.
The main worktree has to be treated specially because well... it's
special from the beginning. So HEAD from the main worktree is
acccessible via the name "main-worktree/HEAD" instead of
"worktrees/main/HEAD" because "main" could be just another secondary
worktree.
This patch also makes it possible to specify refs from one worktree in
another one, e.g.
git log worktrees/foo/HEAD
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When multiple worktrees are used, we need rules to determine if
something belongs to one worktree or all of them. Instead of keeping
adding rules when new stuff comes (*), have a generic rule:
- Inside $GIT_DIR, which is per-worktree by default, add
$GIT_DIR/common which is always shared. New features that want to
share stuff should put stuff under this directory.
- Inside refs/, which is shared by default except refs/bisect, add
refs/worktree/ which is per-worktree. We may eventually move
refs/bisect to this new location and remove the exception in refs
code.
(*) And it may also include stuff from external commands which will
have no way to modify common/per-worktree rules.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For consistency with "add -f -f" and "move -f -f" which override
the lock on a worktree, allow "remove -f -f" to do so, as well, as a
convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For consistency with "add -f -f", which allows a missing but locked
worktree path to be re-used, allow "move -f -f" to override a lock,
as well, as a convenience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For safety, "git worktree add <path>" will refuse to add a new
worktree at <path> if <path> is already associated with a worktree
entry, even if <path> is missing (for instance, has been deleted or
resides on non-mounted removable media or network share). The typical
way to re-create a worktree at <path> in such a situation is either to
prune all "broken" entries ("git worktree prune") or to selectively
remove the worktree entry manually ("git worktree remove <path>").
However, neither of these approaches ("prune" nor "remove") is
especially convenient, and they may be unsuitable for scripting when a
tool merely wants to re-use a worktree if it exists or create it from
scratch if it doesn't (much as a tool might use "mkdir -p" to re-use
or create a directory).
Therefore, teach 'add' to respect --force as a convenient way to
re-use a path already associated with a worktree entry if the path is
non-existent. For a locked worktree, require --force to be specified
twice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the '--quiet' option to git worktree, as for the other git
commands. 'add' is the only command affected by it since all other
commands, except 'list', are currently silent by default.
[jc: appiled trivial fix-up to keep the tests from touching outside
the scratch area]
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree add" learned to check out an existing branch.
* tg/worktree-add-existing-branch:
worktree: teach "add" to check out existing branches
worktree: factor out dwim_branch function
worktree: improve message when creating a new worktree
worktree: remove extra members from struct add_opts
|
|
"git worktree remove" learned that "-f" is a shorthand for
"--force" option, just like for "git worktree add".
* sb/worktree-remove-opt-force:
worktree: accept -f as short for --force for removal
|
|
Currently 'git worktree add <path>' creates a new branch named after the
basename of the path by default. If a branch with that name already
exists, the command refuses to do anything, unless the '--force' option
is given.
However we can do a little better than that, and check the branch out if
it is not checked out anywhere else. This will help users who just want
to check an existing branch out into a new worktree, and save a few
keystrokes.
As the current behaviour is to simply 'die()' when a branch with the name
of the basename of the path already exists, there are no backwards
compatibility worries here.
We will still 'die()' if the branch is checked out in another worktree,
unless the --force flag is passed.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* es/worktree-docs:
git-worktree.txt: unify command-line prompt in example blocks
git-worktree.txt: recommend 'git worktree remove' over manual deletion
|
|
Many commands support a "--force" option, frequently abbreviated as
"-f", however, "git worktree remove"'s hand-rolled OPT_BOOL forgets
to recognize the short form, despite git-worktree.txt documenting
"-f" as supported. Replace OPT_BOOL with OPT__FORCE, which provides
"-f" for free, and makes 'remove' consistent with 'add' option
parsing (which also specifies the PARSE_OPT_NOCOMPLETE flag).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command-line prompt in the "EXAMPLES" section is "$", however,
examples in the 'git worktree list' section (oddly) use "S" as a
prompt. Fix this inconsistency by settling on "$" as prompt in all
examples.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cc73385cf6 (worktree remove: new command, 2018-02-12) implemented
and documented 'git worktree remove', it forgot to update existing
instructions suggesting manual deletion. Fix this oversight by
recommending 'git worktree remove' instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree" learned move and remove subcommands.
* nd/worktree-move:
t2028: fix minor error and issues in newly-added "worktree move" tests
worktree remove: allow it when $GIT_WORK_TREE is already gone
worktree remove: new command
worktree move: refuse to move worktrees with submodules
worktree move: accept destination as directory
worktree move: new command
worktree.c: add update_worktree_location()
worktree.c: add validate_worktree()
|
|
When 4e85333197 (worktree: make add <path> <branch> dwim, 2017-11-26)
added an example command in a literal code block, it neglected to
insert a mandatory "+" line before the block. This omission resulted
in both the literal code block and the (existing) paragraph following
the block to be outdented, even though they should be indented under
the 'add' sub-command along with the rest of the text pertaining to
that command. Furthermore, the mandatory "+" line separating the code
block from the following text got rendered as a leading character on
the line ("+ If <commit-ish>...") rather than being treated as a
formatting directive.
Fix these problems by adding the missing "+" line before the example
code block.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the closing ")" to a parenthetical phrase introduced by 4e85333197
(worktree: make add <path> <branch> dwim, 2017-11-26).
While at it, add a missing ":" at the end of the same sentence since
it precedes an example literal command block.
Reported-by: Mike Nordell <tamlin.thefirst@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Submodules contains .git files with relative paths. After a worktree
move, these files need to be updated or they may point to nowhere.
This is a bandage patch to make sure "worktree move" don't break
people's worktrees by accident. When .git file update code is in
place, this validate_no_submodules() could be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add' is documented to take an optional <branch>
argument, which is checked out in the new worktree. However it is more
generally possible to use a commit-ish as the optional argument, and
check that out into the new worktree.
Document that this is a possibility, as new users of git worktree add
might find it helpful.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* bc/worktree-doc-fix-detached:
Documentation: correctly spell git worktree --detach
|
|
The option is “--detach”, but we accidentally spelled it “--detached” at
one point in the man page.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reported-by: Casey Rodarmor <casey@rodarmor.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* nd/worktree-lock:
git-worktree.txt: fix typo "to"/"two", and add comma
|
|
Signed-off-by: Ben North <ben@redfrontdoor.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
|
|
This allows the user to do something like "worktree lock foo" or
"worktree lock to/foo" instead of "worktree lock /long/path/to/foo" if
it's unambiguous.
With completion support it could be quite convenient. While this base
name search can be done in the same worktree iteration loop, the code is
split into a separate function for clarity.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
|
|
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Eric Sunshine
Alexander Blesius
Junio C Hamano
Nguyễn Thái Ngọc Duy
Andreas Heiduk
Elia Pinto
Ævar Arnfjörð Bjarmason
Thomas Gummerer
Stefan Beller
Ralf Thielow
brian m. carlson
Ben North
Jordan DE GEA