summaryrefslogtreecommitdiff
path: root/Documentation/git-whatchanged.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-2/+2
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-3/+3
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05whatchanged documentation: share description of --pretty with othersLibravatar Denis Cheng1-5/+4
The documentation had its own description for --pretty and did not include pretty-options/formats as documentation for other commands in the "log" family did. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-17Documentation/git-whatchanged.txt: show -<n> instead of --max-count.Libravatar Junio C Hamano1-1/+1
... to match the change we did earlier to git-log documentation. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05Fix up docs where "--" isn't displayed correctly.Libravatar sean1-1/+1
A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-22Format tweaks for asciidoc.Libravatar Francis Daly1-3/+3
Some documentation "options" were followed by independent preformatted paragraphs. Now they are associated plain text paragraphs. The difference is clear in the generated html. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-30Add examples for git-log documentation and others.Libravatar Linus Torvalds1-0/+14
I don't think people really follow the links or think very abstractly at all in the first place. So I was thinking more of some explicit examples. I actually think every command should have an example in the man-page, and hey, here's a patch to start things off. Of course, I'm not exactly "Mr Documentation", and I don't know that this is the prettiest way to do this, but I checked that the resulting html and man-page seems at least reasonable. And hey, if the examples look like each other, that's just because I'm also not "Mr Imagination". Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-16Merge branch 'fixes'Libravatar Junio C Hamano1-0/+7
2005-10-15whatchanged: document -m option from git-diff-tree.Libravatar Junio C Hamano1-0/+7
The documentation for git-whatchanged is meant to describe only the most frequently used options from git-diff-tree. Because "why doesn't it show merges" was asked more than once, we'd better describe '-m' option there. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10The synopsis of the manpages should use the hyphenated versionLibravatar Christian Meder1-1/+1
The synopsis of the manpages should use the hyphenated version of the git commands. Adapt the remaining offenders. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-14Documentation updates.Libravatar Junio C Hamano1-0/+61
Linus brought up that documentation for many commands have incorrect attribution. I started counting lines again, but ended up adding a handful of missing manual pages. Signed-off-by: Junio C Hamano <junkio@cox.net>