summaryrefslogtreecommitdiff
path: root/Documentation/git-verify-pack.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-1/+1
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-01add storage size output to 'git verify-pack -v'Libravatar Nicolas Pitre1-2/+2
This can possibly break external scripts that depend on the previous output, but those script can't possibly be critical to Git usage, and fixing them should be trivial. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2006-05-05Fix up docs where "--" isn't displayed correctly.Libravatar sean1-1/+1
A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-08Documentation/git-verify-pack.txt: added documentation for --.Libravatar Nikolai Weibull1-1/+3
The -- option has been added to the documentation of git-verify-pack. Signed-off-by: Nikolai Weibull <nikolai@bitwi.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Convert usage of GIT and Git into gitLibravatar Christian Meder1-2/+2
Convert usage of GIT and Git into git. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03[PATCH] Random documentation fixesLibravatar Jonas Fonseca1-5/+9
The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-14[PATCH] Documentation: packed GIT support commands.Libravatar Junio C Hamano1-1/+12
This adds documentation for creating packed archives, inspecting, validating them, and unpacking them. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29[PATCH] Add git-verify-pack command.Libravatar Junio C Hamano1-0/+38
Given a list of <pack>.idx files, this command validates the index file and the corresponding .pack file for consistency. This patch also uses the same validation mechanism in fsck-cache when the --full flag is used. During normal operation, sha1_file.c verifies that a given .idx file matches the .pack file by comparing the SHA1 checksum stored in .idx file and .pack file as a minimum sanity check. We may further want to check the pack signature and version when we map the pack, but that would be a separate patch. Earlier, errors to map a pack file was not flagged fatal but led to a random fatal error later. This version explicitly die()s when such an error is detected. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>