summaryrefslogtreecommitdiff
path: root/Documentation/git-tar-tree.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-22Documentation: update tar.umask defaultLibravatar René Scharfe1-9/+6
As noted by Mike Hommey, the documentation for the config setting tar.umask is not up-to-date. Commit f08b3b0e2e9ad87767d80ff03b013c686e08ba4b changed the default from 0 to 2; this patch finally documents it. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-18git-tar-tree: complete deprecation conversion messageLibravatar Sam Vilain1-1/+1
The syntax for git-archive is different; warn about it in the deprecation message on the manual page. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Documentation/git-tar-tree.txt: default umask is now 002Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-24Remove upload-tar and make git-tar-tree a thin wrapper to git-archiveLibravatar Junio C Hamano1-0/+3
The command now issues a big deprecation warning message and runs git-archive command with appropriate arguments. git-tar-tree $tree_ish $base always forces $base to be the leading directory name, so the --prefix parameter passed internally to git-archive is a slash appended to it, i.e. "--prefix=$base/". Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-30tar-tree: illustrate an obscure feature betterLibravatar Johannes Schindelin1-0/+5
Since you can tar just a subdirectory of a certain revision, tell the users so, by showing an example how to do it. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-23tar-tree: add the "tar.umask" config optionLibravatar Willy Tarreau1-1/+14
By default, git-tar-tree(1) sets file and directories modes to 0666 or 0777. While this is both useful and acceptable for projects such as the Linux Kernel, it might be excessive for other projects. With this variable, it becomes possible to tell git-tar-tree(1) to apply a specific umask to the modes above. The special value "user" indicates that the user's current umask will be used. This should be enough for most projects, as it will lead to the same permissions as git-checkout(1) would use. The default value remains 0, which means world read-write. Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-18git-tar-tree: documentation updateLibravatar Rene Scharfe1-5/+10
* add example on how to avoid adding a global extended pax header * don't mention linux anymore, use git itself as an example instead * update to v1.4.0 ;-) * append missing :: to the examples Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07Documentation: add missing docs make check-docs found.Libravatar Junio C Hamano1-1/+30
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05[PATCH] Assorted documentation patchesLibravatar Johannes Schindelin1-1/+1
[jc: Johannes spent time and effort to see how consistent our use of terminilogy is, and as a byproduct made these corrections not related to the terminology unification. I really appreciate it.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-06-02[PATCH] git-tar-tree: small doc updateLibravatar Rene Scharfe1-1/+8
document difference in behaviour w/ regard to tree vs. commit and correct author information. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-10[PATCH 1/4] split core-git.txt and updateLibravatar David Greaves1-0/+32
Split the core-git.txt file Formatting fix to the diff-format.txt Signed-off-by: David Greaves <david@dgreaves.com>