summaryrefslogtreecommitdiff
path: root/Documentation/git-submodule.txt
AgeCommit message (Collapse)AuthorFilesLines
2009-02-07submodule: add --no-fetch parameter to update commandLibravatar Fabian Franz1-1/+6
git submodule update --no-fetch makes it possible to use git submodule update in complete offline mode by not fetching new revisions. This does make sense in the following setup: * There is an unstable and a stable branch in the super/master repository. * The submodules might be at different revisions in the branches. * You are at some place without internet connection ;) With this patch it is now possible to change branches and update the submodules to be at the recorded revision without online access. Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update. Signed-off-by: Fabian Franz <git@fabian-franz.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Merge branch 'maint' to sync with GIT 1.6.0.6Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Documentation: fix typos, grammar, asciidoc syntaxLibravatar Markus Heidelberg1-1/+1
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-25git-submodule: add "sync" commandLibravatar David Aguilar1-0/+9
When a submodule's URL changes upstream, existing submodules will be out of sync since their remote."$origin".url will still be set to the old value. This adds a "git submodule sync" command that reads submodules' URLs from .gitmodules and updates them accordingly. Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-17git-submodule - Add 'foreach' subcommandLibravatar Mark Levedahl1-0/+17
submodule foreach <command-list> will execute the list of commands in each currently checked out submodule directory. The list of commands is arbitrary as long as it is acceptable to sh. The variables '$path' and '$sha1' are availble to the command-list, defining the submodule path relative to the superproject and the submodules's commitID as recorded in the superproject (this may be different than HEAD in the submodule). This utility is inspired by a number of threads on the mailing list looking for ways to better integrate submodules in a tree and work with them as a unit. This could include fetching a new branch in each from a given source, or possibly checking out a given named branch in each. Currently, there is no consensus as to what additional commands should be implemented in the porcelain, requiring all users whose needs exceed that of git-submodule to do their own scripting. The foreach command is intended to support such scripting, and in particular does no error checking and produces no output, thus allowing end users complete control over any information printed out and over what constitutes an error. The processing does terminate if the command-list returns an error, but processing can easily be forced for all submodules be terminating the list with ';true'. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30Make the DESCRIPTION match <x>... items in the SYNOPSISLibravatar Abhijit Menon-Sen1-2/+2
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-27Documentation/git-submodule.txt: fix doubled wordLibravatar Cesar Eduardo Barros1-1/+1
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-19Documentation/git-submodule.txt: Further clarify the descriptionLibravatar Petr Baudis1-22/+47
This patch rewrites the general description yet again, first clarifying the high-level concept, mentioning the difference to remotes and using the subtree merge strategy, then getting to the details about tree entries and .gitmodules file. The patch also makes few smallar grammar fixups within the rest of the description and clarifies how does 'init' relate to 'update --init'. Cc: Heikki Orsila <shdl@zakalwe.fi> Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Documentation/git-submodule.txt: Add Description sectionLibravatar Petr Baudis1-0/+22
Figuring out how submodules work conceptually is quite a bumpy ride for a newcomer; the user manual helps (if one knows to actually look into it), but the reference documentation should provide good quick intro as well. This patch attempts to do that, with suggestions from Heikki Orsila. Cc: Heikki Orsila <shdl@zakalwe.fi> Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-14git-submodule - make "submodule add" more strict, and document itLibravatar Mark Levedahl1-9/+27
This change makes "submodule add" much more strict in the arguments it takes, and is intended to address confusion as recently noted on the git-list. With this change, the required syntax is: $ git submodule add URL path Specifically, this eliminates the form $ git submodule add URL which was confused by more than one person as $ git submodule add path With this patch, the URL locating the submodule's origin repository can be either an absolute URL, or (if it begins with ./ or ../) can express the submodule's repository location relative to the superproject's origin. This patch also eliminates a third form of URL, which was relative to the superproject's top-level directory (not its repository). Any URL that was neither absolute nor matched ./*|../* was assumed to point to a subdirectory of the superproject as the location of the submodule's origin repository. This URL form was confusing and does not seem to correspond to an important use-case. Specifically, no-one has identified the need to clone from a repository already in the superproject's tree, but if this is needed it is easily done using an absolute URL: $(pwd)/relative-path. So, no functionality is lost with this patch. (t6008-rev-list-submodule.sh did rely upon this relative URL, fixed by using $(pwd).) Following this change, there are exactly four variants of submodule-add, as both arguments have two flavors: URL can be absolute, or can begin with ./|../ and thus names the submodule's origin relative to the superproject's origin. Note: With this patch, "submodule add" discerns an absolute URL as matching /*|*:*: e.g., URL begins with /, or it contains a :. This works for all valid URLs, an absolute path in POSIX, as well as an absolute path on Windows). path can either already exist as a valid git repo, or will be cloned from the given URL. The first form here eases creation of a new submodule in an existing superproject as the submodule can be added and tested in-tree before pushing to the public repository. However, the more usual form is the second, where the repo is cloned from the given URL. This specifically addresses the issue of $ git submodule add a/b/c attempting to clone from a repository at "a/b/c" to create a new module in "c". This also simplifies description of "relative URL" as there is now exactly *one* form: a URL relative to the parent's origin repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-2/+2
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-5/+5
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-3/+6
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-16submodule update: add convenience option --initLibravatar Johannes Schindelin1-1/+6
When a submodule is not initialized and you do not want to change the defaults from .gitmodules anyway, you can now say $ git submodule update --init <name> When "update" is called without --init on an uninitialized submodule, a hint to use --init is printed. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-12Documentation/git-submodule: typofixLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-15Merge branch 'py/submodule'Libravatar Junio C Hamano1-3/+16
* py/submodule: git-submodule summary: fix that some "wc" flavors produce leading spaces git-submodule summary: test git-submodule summary: documentation git-submodule summary: limit summary size git-submodule summary: show commit summary git-submodule summary: code framework
2008-03-11git-submodule summary: documentationLibravatar Ping Yin1-3/+16
Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-05git-submodule - Allow adding a submodule in-placeLibravatar Mark Levedahl1-2/+3
When working in the top-level project, it is useful to create a new submodule as a git repo in a subdirectory, then add that submodule to the top-level in place. This patch allows "git submodule add <intended url> subdir" to add the existing subdir to the current project. The presumption is the user will later push / clone the subdir to the <intended url> so that future submodule init / updates will work. Absent this patch, "git submodule add" insists upon cloning the subdir from a repository at the given url, which is fine for adding an existing project in, but less useful when adding a new submodule from scratch to an existing project. The former functionality remains, and the clone is attempted if the subdir does not already exist as a valid git repo. Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-21submodule: Document the details of the command line syntaxLibravatar Steffen Prohaska1-2/+3
Only "status" accepts "--cached" and the preferred way of passing sub-command specific options is after the sub-command. The documentation is adapted to reflect this. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-3/+3
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-27Documentation/git-submodule.txt: typofixLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-16Documentation/git-submodule: refer to gitmodules(5)Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-25git-submodule - allow a relative path as the subproject urlLibravatar Mark Levedahl1-0/+3
This allows a subproject's location to be specified and stored as relative to the parent project's location (e.g., ./foo, or ../foo). This url is stored in .gitmodules as given. It is resolved into an absolute url by appending it to the parent project's url when the information is written to .git/config (i.e., during submodule add for the originator, and submodule init for a downstream recipient). This allows cloning of the project to work "as expected" if the project is hosted on a different server than when the subprojects were added. Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-06git-submodule(1): update description and key namesLibravatar Lars Hjemli1-3/+3
When git-submodule was updated to allow mapping between submodule name and submodule path, the documentation was left untouched. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-06Add [verse] to the SYNOPSIS section of git-submodule.txt.Libravatar Matt Kraai1-0/+1
The SYNOPSIS section of git-submodule.txt contains two forms. Since it doesn't use the verse style, the line boundary between them is not preserved and the second form can appear on the same line as the first form. Adding [verse] enables the verse style, which preserves the line boundary between them. Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02git-submodule: provide easy way of adding new submodulesLibravatar Sven Verdoolaege1-0/+11
To make a submodule effectively usable, the path and a URL where the submodule can be cloned need to be stored in .gitmodules. This subcommand takes care of setting this information after cloning the new submodule. Only the index is updated, so, if needed, the user may still change the URL or switch to a different branch of the submodule before committing. Signed-off-by: Sven Verdoolaege <skimo@kotnet.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06git-submodule: clone during update, not during initLibravatar Lars Hjemli1-8/+8
This teaches 'git-submodule init' to register submodule paths and urls in .git/config instead of actually cloning them. The cloning is now handled as part of 'git-submodule update'. With this change it is possible to specify preferred/alternate urls for the submodules in .git/config before the submodules are cloned. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-26Add git-submodule commandLibravatar Lars Hjemli1-0/+65
This command can be used to initialize, update and inspect submodules. It uses a .gitmodules file, readable by git-config, in the top level directory of the 'superproject' to specify a mapping between submodule paths and repository url. Example .gitmodules layout: [module "git"] url = git://git.kernel.org/pub/scm/git/git.git With this entry in .gitmodules (and a commit reference in the index entry for the path "git"), the command 'git submodule init' will clone the repository at kernel.org into the directory "git". Known issues ============ There is currently no way to override the url found in the .gitmodules file, except by manually creating the subproject repository. The place to fix this in the script has a rather long comment about a possible plan. Funny paths will be quoted in the output from git-ls-files, but git-submodule does not attempt to unquote (or even detect the presence of) such paths. Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>