summaryrefslogtreecommitdiff
path: root/Documentation/git-status.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-3/+3
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-12builtin-status: submodule summary supportLibravatar Ping Yin1-0/+5
This commit teaches 'git commit/status' show a new 'Modified submodules' section, which is an output from: git submodule summary --cached --for-status --summary-limit <limit> just before the 'Untracked files' section. The <limit> is given by the config variable status.submodulesummary to limit the submodule summary size. status.submodulesummary is a bool/int variable with value: - false or 0 by default to disable the summary, or - positive number to limit the summary size, or - true or negative number to unlimit the summary size. Also mention status.submodulesummary in the documentation. Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-3/+3
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-09don't mention index refreshing side effect in git-status docsLibravatar Jeff King1-7/+0
The tip about speeding up subsequent operations is now obsolete; since aecbf914, git-diff now squelches empty diffs and performs an automatic refresh. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-08git-status: documentation improvementsLibravatar Jeff King1-12/+13
This patch is the result of reading over git-status with an editorial eye: - fix a few typo/grammatical errors - mention untracked output - present output types in the order they appear from the command Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-08add status.relativePaths config variableLibravatar Jeff King1-1/+6
The output of git-status was recently changed to output relative paths. Setting this variable to false restores the old behavior for any old-timers that prefer it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-06git-status documentation: mention subdirectory behaviourLibravatar Junio C Hamano1-0/+4
Consistently with all other diff oriented commands, we have given paths relative to the work tree root in git-status output for a long time. This documents the recent behaviour change, as people's eyes (and worse yet, scripts, although scripts should not parse "git status" output) may depend on the old behaviour. In the longer run, giving a --full-name option to git-diff Porcelain similar to what ls-files has, and change the default for git-diff Porcelain to show relative paths may be a good thing to do, in order to hide the oddballness of this git-status behaviour, but that would have a rather large impact to established expectation by existing users. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-06Add a note about the index being updated by git-status in some casesLibravatar Steven Grimm1-0/+7
Signed-off-by: Steven Grimm <koreth@midwinter.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-02Create a new manpage for the gitignore format, and reference it elsewhereLibravatar Josh Triplett1-5/+3
Only git-ls-files(1) describes the gitignore format in detail, and it does so with reference to git-ls-files options. Most users don't use the plumbing command git-ls-files directly, and shouldn't have to look in its manpage for information on the gitignore format. Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor out the gitignore documentation into that file, changing it to refer to .gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference gitignore(5) from other relevant manpages and documentation. Remove now-redundant information on exclude patterns from git-ls-files(1), leaving only information on how git-ls-files options specify exclude patterns and what precedence they have. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-21git-status: respect core.excludesFileLibravatar Johannes Schindelin1-0/+5
git-add reads this variable, and honours the contents of that file if that exists. Match this behaviour in git-status, too. Noticed by Evan Carroll on IRC. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-17Convert update-index references in docs to add.Libravatar Shawn O. Pearce1-1/+1
Since `git add` is the approved porcelain for an end-user to invoke when they want to manipulate the index, porcelain documentation should steer the user to this command rather than the pure plumbing update-index. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Documentation/git-status.txt: mention color configurationLibravatar Junio C Hamano1-0/+9
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-08Documentation: git-status takes the same options as git-commitLibravatar Junio C Hamano1-1/+5
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10The synopsis of the manpages should use the hyphenated versionLibravatar Christian Meder1-1/+1
The synopsis of the manpages should use the hyphenated version of the git commands. Adapt the remaining offenders. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-0/+46
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>