Age | Commit message (Collapse) | Author | Files | Lines |
|
Currently, the options for the `list` and `show` subcommands are just
listed as `<options>`. This seems to imply, from a cursory glance at the
summary, that they take the stash options listed below. However, reading
more carefully, we see that they take log options and diff options
respectively.
Make it more obvious that they take log and diff options by explicitly
stating this in the subcommand summary.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `-`. Such use case is not
really expected.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch continues the effort that is already applied to
`git commit`, `git reset`, `git checkout` etc.
1) Added reference to 'linkgit:gitglossary[7]'.
2) Fixed mentions of incorrectly plural "pathspecs".
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Together with the previous patch, this brings docs for `git stash` to
the common layout used for most other commands (see for example docs
for `git add`, `git commit`, `git checkout`, `git reset`) where all
options are documented in a separate list.
After some thinking and having a look at docs for `git svn` and
`git `submodule`, I have arrived at following conclusions:
* Options should be described in a list rather then text to
facilitate lookup for user.
* Single list is better then multiple lists because it avoids
copy&pasting descriptions between subcommands (or, without
copy&pasting, user will have to look up missing options in other
subcommands).
* As a consequence, commands section should only give brief info and
list possible options. Since options have good enough names, user
will only need to look up the "interesting" options.
* Every option should list which subcommands support it.
I have decided to use alphabetical sorting in the list of options to
facilitate lookup for user.
There is some text editing done to make old descriptions better fit
into the list-style format.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch moves blocks of text as-is to make it easier to review the
next patch.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original phrasing of this paragraph made at least one person stumble
over the word "from" (thinking that it was a typo and "from" was
intended), and other readers chimed in, agreeing that it was confusing:
https://public-inbox.org/git/0102016b8d597569-c1f6cfdc-cb45-4428-8737-cb1bc30655d8-000000@eu-west-1.amazonses.com/#t
Let's rewrite that paragraph for clarity.
Inspired-by-a-patch-by: Catalin Criste <cris_linu_w@yahoo.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
The new command "git switch" is added to avoid the confusion of
one-command-do-all "git checkout" for new users. They are also helpful
to avoid ambiguation context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands...
The "Checking out files" progress line in unpack-trees.c is also updated
to "Updating files" to be neutral to both git-checkout and git-switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mention in the documentation, that `show` accepts any
option known to `git diff`.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1ada5020b3 ("stash: use stash_push for no verb form", 2017-02-28),
when the pathspec argument was introduced in 'git stash', that was also
documented. However I forgot to remove an extra square bracket after
the '--message' argument, even though the square bracket should have
been after the pathspec argument (where it was also added).
Remove the extra square bracket after the '--message' argument, to show
that the pathspec argument should be used with the 'push' verb.
While the pathspec argument can be used without the push verb, that's a
special case described later in the man page, and removing the first extra
square bracket instead of the second one makes the synopis easier to
understand.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although `git stash save` was deprecated recently, some parts of the
documentation still refer to it instead of `push`.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git stash push' fixes a historical wart in the interface of 'git stash
save'. As 'git stash push' has all functionality of 'git stash save',
with a nicer, more consistent user interface deprecate 'git stash
save'. To do this, remove it from the synopsis of the man page, and
move it to a separate section, stating that it is deprecated.
Helped-by: Robert P. J. Day <rpjday@crashcourse.ca>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash push" is the newer interface for creating a stash. While we
are still keeping "git stash save" around for the time being, it's better
to point new users of "git stash" to the more modern (and more feature
rich) interface, instead of teaching them the older version that we
might want to phase out in the future.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the time, a 'stash entry' is called a 'stash'. Lets try to make
this more consistent and use 'stash entry' instead.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that stash_push is used in the no verb form of stash, allow
specifying the command line for this form as well. Always use -- to
disambiguate pathspecs from other non-option arguments.
Also make git stash -p an alias for git stash push -p. This allows
users to use git stash -p <pathspec>.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have stash_push, which accepts pathspec arguments, use
it instead of stash_save in git stash without any additional verbs.
Previously we allowed git stash -- -message, which is no longer allowed
after this patch. Messages starting with a hyphen was allowed since
3c2eb80f, ("stash: simplify defaulting to "save" and reject unknown
options"). However it was never the intent to allow that, but rather it
was allowed accidentally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While working on a repository, it's often helpful to stash the changes
of a single or multiple files, and leave others alone. Unfortunately
git currently offers no such option. git stash -p can be used to work
around this, but it's often impractical when there are a lot of changes
over multiple files.
Allow 'git stash push' to take pathspec to specify which paths to stash.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new git stash push verb in addition to git stash save. The
push verb is used to transition from the current command line arguments
to a more conventional way, in which the message is given as an argument
to the -m option.
This allows us to have pathspecs at the end of the command line
arguments like other Git commands do, so that the user can say which
subset of paths to stash (and leave others behind).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't mention git reset --hard in the documentation for git stash save.
It's an implementation detail that doesn't matter to the end user and
thus shouldn't be exposed to them. In addition it's not quite true for
git stash -p, and will not be true when a filename argument to limit the
stash to a few files is introduced.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of referencing "stash@{n}" explicitly, make it possible to
simply reference as "n". Most users only reference stashes by their
position in the stash stack (what I refer to as the "index" here).
The syntax for the typical stash (stash@{n}) is slightly annoying and
easy to forget, and sometimes difficult to escape properly in a
script. Because of this the capability to do things with the stash by
simply referencing the index is desirable.
This patch includes the superior implementation provided by Øsse Walle
(thanks for that), with a slight change to fix a broken test in the test
suite. I also merged the test scripts as suggested by Jeff King, and
un-wrapped the documentation as suggested by Junio Hamano.
Signed-off-by: Aaron M Watson <watsona4@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
|
|
Some users might want to see diff (patch) output always rather than
diffstat when [s]he runs 'git stash show'. Although this can be
done with adding -p option, users are too lazy to type extra three
keys.
Add two variables that control to show diffstat and patch output
respectively. The stash.showStat is for diffstat and default is
true. The stat.showPatch is for the patch output and default is
false.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document --keep-index's short form -k in both main synopsis and
the save synopsis in the Options section.
Signed-off-by: John Marshall <jm18@sanger.ac.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit a73653130edd6a8977106d45a8092c09040f9132, as it
has been reported that "ls-files --killed" is too time-consuming in
a deep directory with too many untracked crufts (e.g. $HOME/.git
tracking only a few files).
We'd need to revisit it later but "ls-files --killed" needs to be
optimized before it happens.
|
|
"stash save" is about saving the local change to the working tree,
but also about restoring the state of the last commit to the working
tree. When a local change is to turn a non-directory to a directory,
in order to restore the non-directory, everything in the directory
needs to be removed.
Which is fine when running "git stash save --include-untracked",
but without that option, untracked, newly created files in the
directory will have to be discarded, if the state you are restoring
to has a non-directory at the same path as the directory.
Introduce a safety valve to fail the operation in such case, using
the "ls-files --killed" which was designed for this exact purpose.
The "stash save" is stopped when untracked files need to be
discarded because their leading path ceased to be a directory, and
the user is required to pass --force to really have the data
removed.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
save_stash() contains the logic for doing two potentially independent
operations; the first is preparing the stash merge commit, and the
second is updating the stash ref/ reflog accordingly. While the first
operation is abstracted out into a create_stash() for callers to access
via 'git stash create', the second one is not. Fix this by factoring
out the logic for storing the stash into a store_stash() that callers
can access via 'git stash store'.
Like create, store is not intended for end user interactive use, but for
callers in other scripts. We can simplify the logic in the
rebase.autostash feature using this new subcommand.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git stash save' can take -p, the short form of --patch, as an option.
Document this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a note saying that the user probably wants "save" in the create
description. While at it, document that it can optionally take a
message in the synopsis.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sébastien Loriot <sloriot.ml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --include-untracked option acts like the normal "git stash save" but
also adds all untracked files in the working directory to the stash and then
calls "git clean --force --quiet" to restore the working directory to a
pristine state.
This is useful for projects that need to run release scripts. With this
option, the release scripts can be from the main working directory so one
does not have to maintain a "clean" directory in parallel just for
releasing. Basically the work-flow becomes:
$ git tag release-1.0
$ git stash --include-untracked
$ make release
$ git clean -f
$ git stash pop
"git stash" alone is not enough in this case--it leaves untracked files
lying around that might mess up a release process that expects everything to
be very clean or might let a release succeed that should actually fail (due
to a new source file being created that hasn't been committed yet).
Signed-off-by: David Caldwell <david@porkrind.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Describe '-p' as a short form of '--patch' in synopsis and options. Also
refer the reader to the patch mode description of git-add documentation.
Helped-by: Jeff King <peff@peff.net>
Mentored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Valentin Haenel <valentin.haenel@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Update the documentation to indicate that git stash branch only attempts
to drop the specified stash if it looks like stash reference.
Also changed the synopsis to more clearly indicate which commands require
a stash entry reference as opposed to merely a stash-like commit.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.6.4:
git-stash documentation: mention default options for 'list'
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
|
|
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* commit 'tr/reset-checkout-patch^^2':
Make 'git stash -k' a short form for 'git stash save --keep-index'
|
|
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent discussion on the list showed some comments in favour of a
stash/pop workflow:
http://marc.info/?l=git&m=124234911423358&w=2
http://marc.info/?l=git&m=124235348327711&w=2
Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|