summaryrefslogtreecommitdiff
path: root/Documentation/git-show.txt
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25Use proper syntax for replaceables in command docsLibravatar Robert P. J. Day1-1/+1
The standard for command documentation synopses appears to be: [...] means optional <...> means replaceable [<...>] means both optional and replaceable So fix a number of doc pages that use incorrect variations of the above. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02doc: keep first level section header in upper caseLibravatar Nguyễn Thái Ngọc Duy1-1/+1
When formatted as a man page, 1st section header is always in upper case even if we write it otherwise. Make all 1st section headers uppercase to keep it close to the final output. This does affect html since case is kept there, but I still think it's a good idea to maintain a consistent style for 1st section headers. Some sections perhaps should become second sections instead, where case is kept, and for better organization. I will update if anyone has suggestions about this. While at there I also make some header more consistent (e.g. examples vs example) and fix a couple minor things here and there. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-30doc: mention 'git show' defaults to HEADLibravatar Todd Zullinger1-2/+2
When 'git show' is called without any object it defaults to HEAD. This has been true since d4ed9793fd ("Simplify common default options setup for built-in log family.", 2006-04-16). The SYNOPSIS suggests that the object argument is required. Clarify that it is not required and note the default. Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-12doc: convert \--option to --optionLibravatar Jeff King1-1/+1
Older versions of AsciiDoc would convert the "--" in "--option" into an emdash. According to 565e135 (Documentation: quote double-dash for AsciiDoc, 2011-06-29), this is fixed in AsciiDoc 8.3.0. According to bf17126, we don't support anything older than 8.4.1 anyway, so we no longer need to worry about quoting. Even though this does not change the output at all, there are a few good reasons to drop the quoting: 1. It makes the source prettier to read. 2. We don't quote consistently, which may be confusing when reading the source. 3. Asciidoctor does not like the quoting, and renders a literal backslash. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-17Documentation/git-show.txt: include common diff options, like git-log.txtLibravatar Matthieu Moy1-0/+9
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26docs: stop using asciidoc no-inline-literalLibravatar Jeff King1-2/+2
In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.*[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\*` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04docs: put listed example commands in backticksLibravatar Jeff King1-5/+5
Many examples of git command invocation are given in asciidoc listing blocks, which makes them monospaced and avoids further interpretation of special characters. Some manpages make a list of examples, like: git foo:: Run git foo. git foo -q:: Use the "-q" option. to quickly show many variants. However, they can sometimes be hard to read, because they are shown in a proportional-width font (so, for example, seeing the difference between "-- foo" and "--foo" can be difficult). This patch puts all such examples into backticks, which gives the equivalent formatting to a listing block (i.e., monospaced and without character interpretation). As a bonus, this also fixes an example in the git-push manpage, in which "git push origin :::" was accidentally considered a newly-indented list, and not a list item with "git push origin :" in it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-11/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-11-09Documentation: document show -sLibravatar Jonathan Nieder1-0/+4
Git's diff machinery has supported a -s (silence diff output) option as far back as v0.99~900 (Silent flag for show-diff, 2005-04-13), but the option is only advertised in an odd corner of the git diff-tree manual. The main use is to retrieve basic metadata about a commit: git show -s rev Explain this in the 'git log' manual and provide an example in the 'git show' examples section. This is kind of a cop-out, since it would be more useful to explain it in the 'git show' manual proper, which says: The command takes options applicable to the git diff-tree command to control how the changes the commit introduces are shown. This manual page describes only the most frequently used options. Fixing that is a larger task for another day. Reported-by: Will Hall <will@gnatter.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-13Documentation: gitrevisions is in section 7Libravatar Jonathan Nieder1-1/+1
Fix references to gitrevisions(1) in the manual pages and HTML documentation. In practice, this will not matter much unless someone tries to use a hard copy of the git reference manual. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Documentation: link to gitrevisions rather than git-rev-parseLibravatar Michael J Gruber1-1/+1
Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-3/+3
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2008-07-30Make the DESCRIPTION match <x>... items in the SYNOPSISLibravatar Abhijit Menon-Sen1-2/+2
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-3/+3
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-22git-show.txt: Not very stubby these days.Libravatar Jon Loeliger1-2/+0
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-4/+4
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-13Documentation: Split description of pretty formats of commit logLibravatar Jakub Narebski1-0/+3
Split description of pretty formats into list of pretty options (--pretty and --encoding) in new file Documentation/pretty-options.txt and description of formats itself as a separate "PRETTY FORMATS" section in pretty-formats.txt While at it correct formatting a bit, to be better laid out in the resulting manpages: git-rev-list(1), git-show(1), git-log(1) and git-diff-tree(1). Those manpages now include pretty options in the same place as it was before, and description of formats just after all options. Inspired by the split into two filesdocumentation for merge strategies: Documentation/merge-options.txt and Documentation/merge-strategies.txt Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-27Fix git-show man page formatting in the EXAMPLES sectionLibravatar Theodore Tso1-3/+3
Fix asciidoc markup so that the man page is properly formatted in the EXAMPLES section. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-08Update git-log and git-show documentationLibravatar Michael S. Tsirkin1-0/+3
Point at where the options not so frequently used are found. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Refer users to git-rev-parse for revision specification syntax.Libravatar Shawn O. Pearce1-0/+2
The revision specification syntax (sometimes referred to as SHA1-expressions) is accepted almost everywhere in Git by almost every tool. Unfortunately it is only documented in git-rev-parse.txt, and most users don't know to look there. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Documentation: minor rewording for git-log and git-show pages.Libravatar Junio C Hamano1-4/+6
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Documentation: i18n commit log message notes.Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-14git-show: grok blobs, trees and tags, tooLibravatar Johannes Schindelin1-7/+33
Since git-show is pure Porcelain, it is the ideal candidate to pretty print other things than commits, too. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-22Move --pretty options into Documentation/pretty-formats.txtLibravatar Chris Riddoch1-4/+1
Asciidoc-include it into the manuals for programs that use the --pretty command-line option, for consistency among the docs. This describes all the pretty-formats currently listed in the cmit_fmt enum in commit.h, and also briefly describes the presence and format of the 'Merge: ' line in some pretty formats. There's a hedge that limiting your view of history can affect what goes in the Merge: line, and that --abbrev/--no-abbrev do nothing to the 'raw' format. Signed-off-by: Chris Riddoch <chris@syntacticsugar.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-07Basic documentation for git-showLibravatar Petr Baudis1-0/+49
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>