summaryrefslogtreecommitdiff
path: root/Documentation/git-send-email.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-05-04Documentation/git-send-email: Add "Use gmail as the smtp server"Libravatar Ping Yin1-0/+15
Signed-off-by: Ping Yin <pkufranky@gmail.com> Acked by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-26Merge branch 'jc/1.7.0-send-email-no-thread-default'Libravatar Junio C Hamano1-3/+3
* jc/1.7.0-send-email-no-thread-default: send-email: make --no-chain-reply-to the default Conflicts: git-send-email.perl
2009-11-30Merge branch 'fc/send-email-envelope'Libravatar Junio C Hamano1-3/+4
2009-11-27send-email: automatic envelope senderLibravatar Felipe Contreras1-3/+4
This adds the option to specify the envelope sender as "auto" which would pick the 'from' address. This is good because now we can specify the address only in one place in $HOME/.gitconfig and change it easily. [jc: added tests] Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-13add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"Libravatar Jonathan Nieder1-2/+2
Use the new "git var GIT_EDITOR" feature to decide what editor to use, instead of duplicating its logic elsewhere. This should make the behavior of commands in edge cases (e.g., editor names with spaces) a little more consistent. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-22send-email: make --no-chain-reply-to the defaultLibravatar Junio C Hamano1-3/+3
In http://article.gmane.org/gmane.comp.version-control.git/109790 I threatened to announce a change to the default threading style used by send-email to no-chain-reply-to (i.e. the second and subsequent messages will all be replies to the first one), unless nobody objected, in 1.6.3. Nobody objected, as far as I can dig the list archive. But when nothing happened in 1.6.3 nor 1.6.4, nobody from the camp who complained loudly that led to the message did not complain either. So I am guessing that after all nobody cares about this. But 1.7.0 is a good time to change this, and as I said in the message, I personally think it is a good change, so here it is. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-31Documentation: git-send-email: correct statement about standard portsLibravatar Wesley J. Landaker1-2/+3
The current documentation states that servers typically listen on port 465 and calls this "ssmtp". While it's true that many mail servers use port 465 for SSL smtp, this is non-standard, and hails from the days before smtp and submission TLS support, that arrived in RFC2487 and RFC3207. Port 465 is actually assigned by IANA for unrelated purposes, and is mostly still used by mail servers today only to support Outlook Express. In any case, this patch helps the documentation better reflect both standards and reality, while still helpfully mentioning ports numbers that a user may wish to specify. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-31Documentation: git-send-email: fix submission port numberLibravatar Wesley J. Landaker1-1/+1
The current documentation confuses non-standard SSL smtp port 465 with submission port 587 (RFC 4406). This patch just changes the referenced number. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-22Improve doc for format-patch threading options.Libravatar Yann Dirson1-5/+16
This hopefully makes the relationship between threading options of format-patch and send-email easier to grasp. Signed-off-by: Yann Dirson <ydirson@altern.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-18Test cccmd in t9001-send-email.sh and fix some bugsLibravatar Paolo Bonzini1-2/+2
For another patch series I'm working on I needed some tests for the cc-cmd feature of git-send-email. This patch adds 3 tests for the feature and for the possibility to specify --suppress-cc multiple times, and fixes two bugs. The first bug is that the --suppress-cc option for `cccmd' was misspelled as `ccmd' in the code. The second bug, which is actually found only with my other series, is that the argument to the cccmd is never quoted, so the cccmd would fail with patch file names containing a space. A third bug I fix (in the docs) is that the bodycc argument was actually spelled ccbody in the documentation and bash completion. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Cc: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-12Merge branch 'mh/maint-fix-send-email-threaded' into mh/fix-send-email-threadedLibravatar Junio C Hamano1-2/+3
* mh/maint-fix-send-email-threaded: doc/send-email: clarify the behavior of --in-reply-to with --no-thread send-email: fix non-threaded mails add a test for git-send-email for non-threaded mails Conflicts: git-send-email.perl t/t9001-send-email.sh
2009-06-12doc/send-email: clarify the behavior of --in-reply-to with --no-threadLibravatar Markus Heidelberg1-2/+3
Also remove the argument from --[no-]chain-reply-to. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-11Merge branch 'maint'Libravatar Junio C Hamano1-0/+4
* maint: Documentation: git-send-mail can take rev-list arg to drive format-patch rebase--interactive: remote stray closing parenthesis
2009-06-11Documentation: git-send-mail can take rev-list arg to drive format-patchLibravatar Paolo Bonzini1-0/+4
The git-send-email docs do not mention except in the usage lines the combined patch formatting/sending ability of git-send-email. This patch expands on the possible arguments to git-send-email and explains the meaning of the rev-list argument. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-31Merge branch 'mw/send-email'Libravatar Junio C Hamano1-12/+15
* mw/send-email: send-email: Remove superfluous `my $editor = ...' send-email: 'References:' should only reference what is sent send-email: Handle "GIT:" rather than "GIT: " during --compose Docs: send-email: --smtp-server-port can take symbolic ports Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit Docs: send-email: Put options back into alphabetical order
2009-05-13send-email: Add config option for sender addressLibravatar Trent Piepho1-3/+6
The sender address, as specified with the '--from' command line option, couldn't be set in the config file. So add a new config option, 'sendemail.from', which sets it. One can use 'sendemail.<identity>.from' as well of course, which is likely the more useful case. The sender address would default to GIT_AUTHOR_IDENT, which is usually the right thing, but this doesn't allow switching based on the identity selected. It's possible to switch the SMTP server and envelope sender by using the '--identity' option, in which case one probably wants to use a different from address as well, but this had to be manually specified. The documentation for 'from' is also corrected somewhat. If '--from' is specified (or the new sendemail.from option is used) then the user isn't prompted. The default with no '--from' option (or sendemail.from option) is GIT_AUTHOR_IDENT first then GIT_COMMITTER_IDENT, not just GIT_COMMITTER_IDENT. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-22Add parsing of elm aliases to git-send-emailLibravatar Bill Pemberton1-1/+1
elm stores a text file version of the aliases that is <alias> = <comment> = <email address> This adds the parsing of this file to git-send-email Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-14Docs: send-email: --smtp-server-port can take symbolic portsLibravatar Michael Witten1-1/+3
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-14Docs: send-email: Refer to CONFIGURATION section for sendemail.multieditLibravatar Michael Witten1-3/+4
Replace description of sendemail.multiedit in --annotate docs with a reference to the CONFIGURATION section. Add such a reference to the --compose documentation. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-14Docs: send-email: Put options back into alphabetical orderLibravatar Michael Witten1-11/+11
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-07git-send-email.txt: clarify which options take an argument.Libravatar Matthieu Moy1-17/+17
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-17git-send-email.txt: describe --compose betterLibravatar Stephen Boyd1-7/+6
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-05Merge branch 'js/send-email'Libravatar Junio C Hamano1-8/+40
* js/send-email: send-email: add --confirm option and configuration setting send-email: don't create temporary compose file until it is needed send-email: --suppress-cc improvements send-email: handle multiple Cc addresses when reading mbox message send-email: allow send-email to run outside a repo
2009-03-02send-email: add --confirm option and configuration settingLibravatar Jay Soffian1-0/+21
send-email violates the principle of least surprise by automatically cc'ing additional recipients without confirming this with the user. This patch teaches send-email a --confirm option. It takes the following values: --confirm=always always confirm before sending --confirm=never never confirm before sending --confirm=cc confirm before sending when send-email has automatically added addresses from the patch to the Cc list --confirm=compose confirm before sending the first message when using --compose. (Needed to maintain backwards compatibility with existing behavior.) --confirm=auto 'cc' + 'compose' If sendemail.confirm is unconfigured, the option defaults to 'compose' if any suppress-Cc related options have been used, otherwise it defaults to 'auto'. Unfortunately, it is impossible to introduce this patch such that it helps new users without potentially annoying some existing users. We attempt to mitigate the latter by: * Allowing the user to set 'git config sendemail.confirm never' * Allowing the user to say 'all' after the first prompt to not be prompted on remaining emails during the same invocation. * Telling the user about the 'sendemail.confirm' setting if it is unconfigured whenever we prompt due to Cc before sending. * Only prompting if no --suppress related options have been passed, as using such an option is likely to indicate an experienced send-email user. There is a slight fib in message informing the user of the sendemail.confirm setting and this is intentional. Setting 'auto' differs from leaving sendemail.confirm unset in two ways: 1) 'auto' obviously squelches the informational message; 2) 'auto' prompts when the Cc list has been expanded even in the presence of a --suppress related option, where leaving sendemail.confirm unset does not. This is intentional to keep the message simple, and to avoid adding another sendemail.confirm value ('auto-except-suppress'?). Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-18Documentation: Note file formats send-email acceptsLibravatar Todd Zullinger1-0/+13
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-14send-email: --suppress-cc improvementsLibravatar Jay Soffian1-8/+19
Since 6564828 (git-send-email: Generalize auto-cc recipient mechanism., 2007-12-25) we can suppress automatic Cc generation separately for each of the possible address sources. However, --suppress-cc=sob suppressed both SOB lines and body (but not header) Cc lines, contrary to the name. Change --suppress-cc=sob to mean only SOB lines, and add separate choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc'). The option --no-signed-off-by-cc now acts like --suppress-cc=sob, which is not backwards compatible but matches the name of the option. Also update the documentation and add a few tests. Original patch by me. Revised by Thomas Rast, who contributed the documentation and test updates. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11Merge branch 'mh/maint-sendmail-cc-doc' into maintLibravatar Junio C Hamano1-0/+1
* mh/maint-sendmail-cc-doc: doc/git-send-email: mention sendemail.cc config variable
2009-01-07Merge branch 'mh/maint-sendmail-cc-doc'Libravatar Junio C Hamano1-0/+1
* mh/maint-sendmail-cc-doc: doc/git-send-email: mention sendemail.cc config variable
2008-12-29doc/git-send-email: mention sendemail.cc config variableLibravatar Markus Heidelberg1-0/+1
This variable was added in 5f8b9fc (git-send-email: add a new sendemail.cc configuration variable, 2008-04-27), but is not yet refered to by the documentation. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-27git-send-email.txt: move --format-patch paragraph to a proper locationLibravatar Adeodato Simó1-6/+6
When introducing --format-patch, its documentation was accidentally inserted in the middle of documentation for --validate. Signed-off-by: Adeodato Simó <dato@net.com.org.es> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-09Fix typos in documentationLibravatar Alexander Potashev1-1/+1
Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11git send-email: ask less questions when --compose is used.Libravatar Pierre Habouzit1-0/+9
When --compose is used, we can grab the From/Subject/In-Reply-To from the edited summary, let it be so and don't ask the user silly questions. The summary templates gets quite revamped, and includes the list of patches subjects that are going to be sent with this batch. When having a body full of empty lines, the summary isn't sent. Document that in the git-send-email manpage fully. Note: It doesn't deal with To/Cc/Bcc yet. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11git send-email: add --annotate optionLibravatar Pierre Habouzit1-0/+11
This allows to review every patch (and fix various aspects of them, or comment them) in an editor just before being sent. Combined to the fact that git send-email can now process revision lists, this makes git send-email and efficient way to review and send patches interactively. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-11git send-email: interpret unknown files as revision listsLibravatar Pierre Habouzit1-1/+7
Filter out all the arguments git-send-email doesn't like to a git format-patch command, that dumps its content to a safe directory. Barf when a file/revision conflict occurs, allow it to be overriden --[no-]format-patch. Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-01send-email: signedoffcc -> signedoffbycc, but handle bothLibravatar Michael Witten1-1/+1
The documentation now mentions sendemail.signedoffbycc instead of sendemail.signedoffcc in order to match with the options --signed-off-by-cc; the code has been updated to reflect this as well, but sendemail.signedoffcc is still handled. Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01Docs: send-email: Create logical groupings for man textLibravatar Michael Witten1-50/+69
The options are partitioned into more digestible groups. Within these groups, the options are sorted alphabetically. Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01Docs: send-email: Remove unnecessary config variable descriptionLibravatar Michael Witten1-75/+16
The config variables are mentioned within the descriptions of the command line options with which they are associated. Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01Docs: send-email: --chain_reply_to -> --[no-]chain-reply-toLibravatar Michael Witten1-1/+1
Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01send-email: change --no-validate to boolean --[no-]validateLibravatar Michael Witten1-2/+7
There is also now a configuration variable: sendemail[.<identity>].validate Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01Docs: send-email: Man page option orderingLibravatar Michael Witten1-72/+66
Now the man page lists the options in alphabetical order (in terms of the 'main' part of an option's name). Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-01Docs: send-email's usage text and man page mention same optionsLibravatar Michael Witten1-8/+13
Specifically, boolean options are now listed in the form --[no-]option and both forms of documentation now consistently use --[no-]signed-off-by-cc Signed-off-by: Michael Witten <mfwitten@mit.edu> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-08-31Document sendemail.envelopesender configurationLibravatar Ask Bjørn Hansen1-0/+3
Signed-off-by: Ask Bjørn Hansen <ask@develooper.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30Replace uses of "git-var" with "git var"Libravatar Todd Zullinger1-1/+1
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-25git-send-email: add support for TLS via Net::SMTP::SSLLibravatar Thomas Rast1-4/+12
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL, which avoids Net::SMTP::TLS and its weird error checking. This trick is due to Brian Evins. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-4/+8
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-19Document the sendemail.smtpserverport config variableLibravatar Kevin Ballard1-0/+3
Add sendemail.smtpserverport to the Configuration section of the git-send-email manpage. It should probably be referenced in the --smtp-server-port option as well. Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-11Merge branch 'mw/send-email'Libravatar Junio C Hamano1-5/+34
* mw/send-email: git-send-email: Better handling of EOF git-send-email: SIG{TERM,INT} handlers git-send-email: ssh/login style password requests
2008-02-05git-send-email: Generalize auto-cc recipient mechanism.Libravatar David Brown1-0/+11
There are a few options to git-send-email to suppress the automatic generation of 'Cc' fields: --suppress-from, and --signed-off-cc. However, there are other times that git-send-email automatically includes Cc'd recipients. This is not desirable for all development environments. Add a new option --suppress-cc, which can be specified one or more times to list the categories of auto-cc fields that should be suppressed. If not specified, it defaults to values to give the same behavior as specified by --suppress-from, and --signed-off-cc. The categories are: self - patch sender. Same as --suppress-from. author - patch author. cc - cc lines mentioned in the patch. cccmd - avoid running the cccmd. sob - signed off by lines. all - all non-explicit recipients Signed-off-by: David Brown <git@davidb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>