summaryrefslogtreecommitdiff
path: root/Documentation/git-send-email.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-08-31Document sendemail.envelopesender configurationLibravatar Ask Bjørn Hansen1-0/+3
Signed-off-by: Ask Bjørn Hansen <ask@develooper.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30Replace uses of "git-var" with "git var"Libravatar Todd Zullinger1-1/+1
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-25git-send-email: add support for TLS via Net::SMTP::SSLLibravatar Thomas Rast1-4/+12
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL, which avoids Net::SMTP::TLS and its weird error checking. This trick is due to Brian Evins. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-4/+8
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-19Document the sendemail.smtpserverport config variableLibravatar Kevin Ballard1-0/+3
Add sendemail.smtpserverport to the Configuration section of the git-send-email manpage. It should probably be referenced in the --smtp-server-port option as well. Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-11Merge branch 'mw/send-email'Libravatar Junio C Hamano1-5/+34
* mw/send-email: git-send-email: Better handling of EOF git-send-email: SIG{TERM,INT} handlers git-send-email: ssh/login style password requests
2008-02-05git-send-email: Generalize auto-cc recipient mechanism.Libravatar David Brown1-0/+11
There are a few options to git-send-email to suppress the automatic generation of 'Cc' fields: --suppress-from, and --signed-off-cc. However, there are other times that git-send-email automatically includes Cc'd recipients. This is not desirable for all development environments. Add a new option --suppress-cc, which can be specified one or more times to list the categories of auto-cc fields that should be suppressed. If not specified, it defaults to values to give the same behavior as specified by --suppress-from, and --signed-off-cc. The categories are: self - patch sender. Same as --suppress-from. author - patch author. cc - cc lines mentioned in the patch. cccmd - avoid running the cccmd. sob - signed off by lines. all - all non-explicit recipients Signed-off-by: David Brown <git@davidb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05git-send-email: ssh/login style password requestsLibravatar Michael Witten1-5/+34
Whilst convenient, it is most unwise to record passwords in any place but one's brain. Moreover, it is especially foolish to store them in configuration files, even with access permissions set accordingly. git-send-email has been amended, so that if it detects an smtp username without a password, it promptly prompts for the password and masks the input for privacy. Furthermore, the argument to --smtp-pass has been rendered optional. The documentation has been updated to reflect these changes. Signed-off-by: Michael Witten <mfwitten@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-26Documentation: add a bit about sendemail.to configurationLibravatar Mike Hommey1-0/+2
While there is information about this in the configuration section, it was missing in the options section. Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-18Fix some documentation typos.Libravatar Ralf Wildenhues1-1/+1
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-07send-email: apply --suppress-from to S-o-b and cc-cmdLibravatar Uwe Kleine-König1-2/+1
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ryan Anderson <ryan@michonline.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-24git-send-email: add a new sendemail.to configuration variableLibravatar Miklos Vajna1-0/+3
Some projects prefer to receive patches via a given email address. In these cases, it's handy to configure that address once. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-26send-email --smtp-server-port: allow overriding the default portLibravatar Junio C Hamano1-0/+5
You can use --smtp-server-port option to specify a port different from the default (typically, SMTP servers listen to smtp port 25 and ssmtp port 465). Users should be aware that sending auth info over non-ssl connections may be unsafe or just may not work at all depending on SMTP server config. Signed-off-by: Glenn Rempe <glenn@rempe.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-03send-email: Add support for SSL and SMTP-AUTHLibravatar Douglas Stockwell1-1/+34
Allows username and password to be given using --smtp-user and --smtp-pass. SSL use is flagged by --smtp-ssl. These are backed by corresponding defaults in the git configuration file. This implements Junio's 'mail identity' suggestion in a slightly more generalised manner. --identity=$identity, backed by sendemail.identity indicates that the configuration subsection [sendemail "$identity"] should take priority over the [sendemail] section for all configuration values. Signed-off-by: Douglas Stockwell <doug@11011.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-01Merge branch 'jp/send-email-cc'Libravatar Junio C Hamano1-0/+9
* jp/send-email-cc: git-send-email --cc-cmd
2007-08-19Fix misspelling of 'suppress' in docsLibravatar Dave Watson1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-17git-send-email --cc-cmdLibravatar Joe Perches1-0/+9
This new option allows an arbitrary "cmd" to generate per patch file specific "Cc:"s. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-17Fix small typo in git send-email man page.Libravatar Sean Estabrooks1-1/+1
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-20Add GIT_EDITOR environment and core.editor configuration variablesLibravatar Adam Roben1-2/+2
These variables let you specify an editor that will be launched in preference to the EDITOR and VISUAL environment variables. The order of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL. [jc: added a test and config variable documentation] Signed-off-by: Adam Roben <aroben@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-27git-send-email: make options easier to configure.Libravatar Adam Roben1-10/+14
This change makes git-send-email's behavior easier to modify by adding config equivalents for two more of git-send-email's flags. The mapping of flag to config setting is: --[no-]supress-from => sendemail.suppressfrom --[no-]signed-off-cc => sendemail.signedoffcc It renames the --threaded option to --thread/--no-thread; the config variable is also called sendemail.thread. Signed-off-by: Adam Roben <aroben@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-26git-send-email: Add --threaded optionLibravatar Adam Roben1-0/+7
The --threaded option controls whether the In-Reply-To header will be set on any emails sent. The current behavior is to always set this header, so this option is most useful in its negated form, --no-threaded. This behavior can also be controlled through the 'sendemail.threaded' config setting. Signed-off-by: Adam Roben <aroben@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-2/+1
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-30send-email documentation: clarify --smtp-serverLibravatar Jari Aalto1-3/+4
It can be either hostname/address, or a full path to a local executable. Signed-off-by: Jari Aalto <jari.aalto@cante.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-25Document --dry-run and envelope-sender for git-send-email.Libravatar Robin H. Johnson1-0/+9
Catch the documentation up with the rest of this patchset. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-18Make git-send-email aware of Cc: lines.Libravatar J. Bruce Fields1-1/+2
In the Linux kernel, for example, it's common to include Cc: lines for cases when you want to remember to cc someone on a patch without necessarily claiming they signed off on it. Make git-send-email aware of these. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11git-send-email: configurable bcc and chain-reply-toLibravatar Avi Kivity1-1/+9
Chain-reply-to is a personal perference, and is unlikely to change from patchset to patchset. Similarly, bcc is likely to have the same values every invocation is one likes to bcc oneself. So, allow both to be set via configuration variables. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-11git-send-email: Document configuration optionsLibravatar Avi Kivity1-0/+13
Wishing to implement an email aliases file, I found that they were already implmented. Document them for the next user. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-01Documentation/git-send-email.txt: Fix labeled list formattingLibravatar Sergey Vlasov1-6/+6
Mark continuation paragraphs of list entries as such to avoid getting literal paragraphs instead. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-29git-send-email: Read the default SMTP server from the GIT config fileLibravatar Sergey Vlasov1-3/+5
Make the default value for --smtp-server configurable through the 'sendemail.smtpserver' option in .git/config (or $HOME/.gitconfig). Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Acked-by: Ryan Anderson <rda@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-29git-send-email: Document support for local sendmail instead of SMTP serverLibravatar Sergey Vlasov1-2/+5
Fix the --smtp-server option description to match reality. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-22Check and document the options to prevent mistakes.Libravatar Eric W. Biederman1-0/+9
When multiple recipients are given to git-send-email on the same --cc line the code does not properly handle it. Full and proper parsing of the email addresses so I can detect which commas mean a new email address is more than I care to implement. In particular this email address: "bibo,mao" <bibo.mao@intel.com> must not be treated as two email addresses. So this patch simply treats all commas in recipient lists as an error and fails if one is given. At the same time it documents that git-send-email wants multiple instances of --cc specified on the command line if you want to cc multiple recipients. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Documentation: Spelling fixesLibravatar Horst H. von Brand1-1/+1
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-13send-email: Add --ccLibravatar Ryan Anderson1-0/+3
Since Junio used this in an example, and I've personally tried to use it, I suppose the option should actually exist. Signed-off-by: Ryan Anderson <ryan@michonline.com>
2006-02-13send-email: Add some options for controlling how addresses are automatically ↵Libravatar Ryan Anderson1-0/+7
added to the cc: list. Signed-off-by: Ryan Anderson <ryan@michonline.com>
2006-02-05git-send-email: Fully implement --quiet and document it.Libravatar Ryan Anderson1-20/+24
Also reorganizes the man page to list options alphabetically. Signed-off-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03[PATCH] Random documentation fixesLibravatar Jonas Fonseca1-7/+9
The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-0/+79
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>