summaryrefslogtreecommitdiff
path: root/Documentation/git-revert.txt
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03cherry-pick/revert: honour --no-gpg-sign in all caseLibravatar Đoàn Trần Công Danh1-1/+4
{cherry-pick,revert} --edit hasn't honoured --no-gpg-sign yet. Pass this option down to git-commit to honour it. Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-19Merge branch 'ra/cherry-pick-revert-skip'Libravatar Junio C Hamano1-3/+1
"git cherry-pick/revert" learned a new "--skip" action. * ra/cherry-pick-revert-skip: cherry-pick/revert: advise using --skip cherry-pick/revert: add --skip option sequencer: use argv_array in reset_merge sequencer: rename reset_for_rollback to reset_merge sequencer: add advice for revert
2019-07-09Merge branch 'nd/switch-and-restore'Libravatar Junio C Hamano1-2/+5
Two new commands "git switch" and "git restore" are introduced to split "checking out a branch to work on advancing its history" and "checking out paths out of the index and/or a tree-ish to work on advancing the current history" out of the single "git checkout" command. * nd/switch-and-restore: (46 commits) completion: disable dwim on "git switch -d" switch: allow to switch in the middle of bisect t2027: use test_must_be_empty Declare both git-switch and git-restore experimental help: move git-diff and git-reset to different groups doc: promote "git restore" user-manual.txt: prefer 'merge --abort' over 'reset --hard' completion: support restore t: add tests for restore restore: support --patch restore: replace --force with --ignore-unmerged restore: default to --source=HEAD when only --staged is specified restore: reject invalid combinations with --staged restore: add --worktree and --staged checkout: factor out worktree checkout code restore: disable overlay mode by default restore: make pathspec mandatory restore: take tree-ish from --source option instead checkout: split part of it to new command 'restore' doc: promote "git switch" ...
2019-07-02cherry-pick/revert: add --skip optionLibravatar Rohit Ashiwal1-3/+1
git am or rebase have a --skip flag to skip the current commit if the user wishes to do so. During a cherry-pick or revert a user could likewise skip a commit, but needs to use 'git reset' (or in the case of conflicts 'git reset --merge'), followed by 'git (cherry-pick | revert) --continue' to skip the commit. This is more annoying and sometimes confusing on the users' part. Add a `--skip` option to make skipping commits easier for the user and to make the commands more consistent. In the next commit, we will change the advice messages hence finishing the process of teaching revert and cherry-pick "how to skip commits". Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-07doc: promote "git restore"Libravatar Nguyễn Thái Ngọc Duy1-2/+2
The new command "git restore" (together with "git switch") are added to avoid the confusion of one-command-do-all "git checkout" for new users. They are also helpful to avoid ambiguous context. For these reasons, promote it everywhere possible. This includes documentation, suggestions/advice from other commands. One nice thing about git-restore is the ability to restore "everything", so it can be used in "git status" advice instead of both "git checkout" and "git reset". The three commands suggested by "git status" are add, rm and restore. "git checkout" is also removed from "git help" (i.e. it's no longer considered a commonly used command) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-07checkout: split part of it to new command 'restore'Libravatar Nguyễn Thái Ngọc Duy1-0/+3
Previously the switching branch business of 'git checkout' becomes a new command 'switch'. This adds the restore command for the checking out paths path. Similar to git-switch, a new man page is added to describe what the command will become. The implementation will be updated shortly to match the man page. A couple main differences from 'git checkout <paths>': - 'restore' by default will only update worktree. This matters more when --source is specified ('checkout <tree> <paths>' updates both worktree and index). - 'restore --staged' can be used to restore the index. This command overlaps with 'git reset <paths>'. - both worktree and index could also be restored at the same time (from a tree) when both --staged and --worktree are specified. This overlaps with 'git checkout <tree> <paths>' - default source for restoring worktree and index is the index and HEAD respectively. A different (tree) source could be specified as with --source (*). - when both index and worktree are restored, --source must be specified since the default source for these two individual targets are different (**) - --no-overlay is enabled by default, if an entry is missing in the source, restoring means deleting the entry (*) I originally went with --from instead of --source. I still think --from is a better name. The short option -f however is already taken by force. And I do think short option is good to have, e.g. to write -s@ or -s@^ instead of --source=HEAD. (**) If you sit down and think about it, moving worktree's source from the index to HEAD makes sense, but nobody is really thinking it through when they type the commands. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-19cherry-pick/revert: add scissors line on merge conflictLibravatar Denton Liu1-0/+7
Fix a bug where the scissors line is placed after the Conflicts: section, in the case where a merge conflict occurs and commit.cleanup = scissors. Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-18am/cherry-pick/rebase/revert: document --rerere-autoupdateLibravatar Phillip Wood1-0/+5
This option was missing from the man pages of these commands. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-28doc: typeset long command-line options as literalLibravatar Matthieu Moy1-2/+2
Similarly to the previous commit, use backquotes instead of forward-quotes, for long options. This was obtained with: perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt and manual tweak to remove false positive in ascii-art (o'--o'--o' to describe rewritten history). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-05Expand documentation describing --signoffLibravatar David A. Wheeler1-0/+1
Modify various document (man page) files to explain in more detail what --signoff means. This was inspired by https://lwn.net/Articles/669976/ where paulj noted, "adding [the] '-s' argument to [a] git commit doesn't really mean you have even heard of the DCO...". Extending git's documentation will make it easier to argue that developers understood --signoff when they use it. Signed-off-by: David A. Wheeler <dwheeler@dwheeler.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-21Documentation: explain optional arguments betterLibravatar Matthieu Moy1-1/+3
Improve the documentation of commands taking optional arguments in two ways: * Documents the behavior of '-O' (for grep) and '-S' (for commands creating commits) when used without the optional argument. * Document the syntax of these options. For the second point, the behavior is documented in gitcli(7), but it is easy for users to miss, and hard for the same user to understand why e.g. "git status -u no" does not work. Document this explicitly in the documentation of each short option having an optional argument: they are the most error prone since there is no '=' sign between the option and its argument. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-21Documentation: use 'keyid' consistently, not 'key-id'Libravatar Matthieu Moy1-3/+3
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-24parse-options: multi-word argh should use dash to separate wordsLibravatar Junio C Hamano1-3/+3
"When you need to use space, use dash" is a strange way to say that you must not use a space. Because it is more common for the command line descriptions to use dashed-multi-words, you do not even want to use spaces in these places. Rephrase the documentation to avoid this strangeness. Fix a few existing multi-word argument help strings, i.e. - GPG key-ids given to -S/--gpg-sign are "key-id"; - Refs used for storing notes are "notes-ref"; and - Expiry timestamps given to --expire are "expiry-date". and update the corresponding documentation pages. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-27cherry-pick, revert: add the --gpg-sign optionLibravatar Nicolas Vigier1-1/+5
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-06Documentation: make AsciiDoc links always point to HTML filesLibravatar Sebastian Schuberth1-1/+1
AsciiDoc's "link" is supposed to create hyperlinks for HTML output, so prefer a "link" to point to an HTML file instead of a text file if an HTML version of the file is being generated. For RelNotes, keep pointing to text files as no equivalent HTML files are generated. If appropriate, also update the link description to not contain the linked file's extension. Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-17documentation: trivial style cleanupsLibravatar Felipe Contreras1-1/+1
White-spaces, missing braces, standardize --[no-]foo. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26docs: stop using asciidoc no-inline-literalLibravatar Jeff King1-2/+2
In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.*[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\*` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-22revert: introduce --abort to cancel a failed cherry-pickLibravatar Jonathan Nieder1-0/+1
After running some ill-advised command like "git cherry-pick HEAD..linux-next", the bewildered novice may want to return to more familiar territory. Introduce a "git cherry-pick --abort" command that rolls back the entire cherry-pick sequence and places the repository back on solid ground. Just like "git merge --abort", this internally uses "git reset --merge", so local changes not involved in the conflict resolution are preserved. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-11-22revert: rename --reset option to --quitLibravatar Jonathan Nieder1-1/+1
The option to "git cherry-pick" and "git revert" to discard the sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce --reset to remove sequencer state, 2011-08-04) has a confusing name. Change it now, while we still have the time. The new name for "cherry-pick, please get out of my way, since I've long forgotten about the sequence of commits I was cherry-picking when you wrote that old .git/sequencer directory" is --quit. Mnemonic: this is analagous to quiting a program the user is no longer using --- we just want to get out of the multiple-command cherry-pick procedure and not to reset HEAD or rewind any other old state. The "--reset" option is kept as a synonym to minimize the impact. We might consider dropping it for simplicity in a separate patch, though. Adjust documentation and tests to use the newly preferred name (--quit) instead of --reset. While at it, let's clarify the short descriptions of these operations in "-h" output. Before: --reset forget the current operation --continue continue the current operation After: --quit end revert or cherry-pick sequence --continue resume revert or cherry-pick sequence Noticed-by: Phil Hord <phil.hord@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-05Merge branch 'rr/revert-cherry-pick-continue'Libravatar Junio C Hamano1-0/+6
* rr/revert-cherry-pick-continue: builtin/revert.c: make commit_list_append() static revert: Propagate errors upwards from do_pick_commit revert: Introduce --continue to continue the operation revert: Don't implicitly stomp pending sequencer operation revert: Remove sequencer state when no commits are pending reset: Make reset remove the sequencer state revert: Introduce --reset to remove sequencer state revert: Make pick_commits functionally act on a commit list revert: Save command-line options for continuing operation revert: Save data for continuing after conflict resolution revert: Don't create invalid replay_opts in parse_args revert: Separate cmdline parsing from functional code revert: Introduce struct to keep command-line options revert: Eliminate global "commit" variable revert: Rename no_replay to record_origin revert: Don't check lone argument in get_encoding revert: Simplify and inline add_message_to_msg config: Introduce functions to write non-standard file advice: Introduce error_resolve_conflict
2011-08-08revert: Introduce --continue to continue the operationLibravatar Ramkumar Ramachandra1-0/+1
Introduce a new "git cherry-pick --continue" command which uses the information in ".git/sequencer" to continue a cherry-pick that stopped because of a conflict or other error. It works by dropping the first instruction from .git/sequencer/todo and performing the remaining cherry-picks listed there, with options (think "-s" and "-X") from the initial command listed in ".git/sequencer/opts". So now you can do: $ git cherry-pick -Xpatience foo..bar ... description conflict in commit moo ... $ git cherry-pick --continue error: 'cherry-pick' is not possible because you have unmerged files. fatal: failed to resume cherry-pick $ echo resolved >conflictingfile $ git add conflictingfile && git commit $ git cherry-pick --continue; # resumes with the commit after "moo" During the "git commit" stage, CHERRY_PICK_HEAD will aid by providing the commit message from the conflicting "moo" commit. Note that the cherry-pick mechanism has no control at this stage, so the user is free to violate anything that was specified during the first cherry-pick invocation. For example, if "-x" was specified during the first cherry-pick invocation, the user is free to edit out the message during commit time. Note that the "--signoff" option specified at cherry-pick invocation time is not reflected in the commit message provided by CHERRY_PICK_HEAD; the user must take care to add "--signoff" during the "git commit" invocation. Helped-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04docs: put listed example commands in backticksLibravatar Jeff King1-2/+2
Many examples of git command invocation are given in asciidoc listing blocks, which makes them monospaced and avoids further interpretation of special characters. Some manpages make a list of examples, like: git foo:: Run git foo. git foo -q:: Use the "-q" option. to quickly show many variants. However, they can sometimes be hard to read, because they are shown in a proportional-width font (so, for example, seeing the difference between "-- foo" and "--foo" can be difficult). This patch puts all such examples into backticks, which gives the equivalent formatting to a listing block (i.e., monospaced and without character interpretation). As a bonus, this also fixes an example in the git-push manpage, in which "git push origin :::" was accidentally considered a newly-indented list, and not a list item with "git push origin :" in it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04revert: Introduce --reset to remove sequencer stateLibravatar Ramkumar Ramachandra1-0/+5
To explicitly remove the sequencer state for a fresh cherry-pick or revert invocation, introduce a new subcommand called "--reset" to remove the sequencer state. Take the opportunity to publicly expose the sequencer paths, and a generic function called "remove_sequencer_state" that various git programs can use to remove the sequencer state in a uniform manner; "git reset" uses it later in this series. Introducing this public API is also in line with our long-term goal of eventually factoring out functions from revert.c into a generic commit sequencer. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-22Merge branch 'mz/doc-synopsis-verse'Libravatar Junio C Hamano1-0/+1
* mz/doc-synopsis-verse: Documentation: use [verse] for SYNOPSIS sections Conflicts: Documentation/git-mergetool--lib.txt
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-06-29Merge branch 'jn/maint-doc-dashdash' into jn/doc-dashdashLibravatar Junio C Hamano1-1/+1
* jn/maint-doc-dashdash: Documentation: quote double-dash for AsciiDoc
2011-06-29Documentation: quote double-dash for AsciiDocLibravatar Jonathan Nieder1-1/+1
AsciiDoc versions since 5.0.6 treat a double-dash surrounded by spaces (outside of verbatim environments) as a request to insert an em dash. Such versions also treat the three-character sequence "\--", when not followed by another dash, as a request to insert two literal minus signs. Thus from time to time there have been patches to add backslashes to AsciiDoc markup to escape double-dashes that are meant to be represent '--' characters used literally on the command line; see v1.4.0-rc1~174, Fix up docs where "--" isn't displayed correctly, 2006-05-05, for example. AsciiDoc 6.0.3 (2005-04-20) made life harder by also treating double-dashes without surrounding whitespace as markup for an em dash, though only when formatting for backends other than the manpages (e.g., HTML). Many pages needed to be changed to use a backslash before the "--" in names of command-line flags like "--add" (see v0.99.6~37, Update tutorial, 2005-08-30). AsciiDoc 8.3.0 (2008-11-29) refined the em-dash rule to avoid that requirement. Double-dashes without surrounding spaces are not rendered as em dashes any more unless bordered on both sides by alphanumeric characters. The unescaped markup for option names (e.g., "--add") works fine, and many instances of this style have leaked into Documentation/; git's HTML documentation contains many spurious em dashes when formatted by an older toolchain. (This patch will not change that.) The upshot: "--" as an isolated word and in phrases like "git web--browse" must be escaped if it is not to be rendered as an em dash by current asciidoc. Use "\--" to avoid such misformatting in sentences in which "--" represents a literal double-minus command line argument that separates options and revs from pathspecs, and use "{litdd}" in cases where the double-dash is embedded in the command name. The latter is just for consistency with v1.7.3-rc0~13^2 (Work around em-dash handling in newer AsciiDoc, 2010-08-23). List of lines to fix found by grepping manpages for "(em". Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Improved-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-8/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-12-28cherry-pick/revert: add support for -X/--strategy-optionLibravatar Jonathan Nieder1-0/+10
For example, this would allow cherry-picking or reverting patches from a piece of history with a different end-of-line style, like so: $ git revert -Xrenormalize old-problematic-commit Currently that is possible with manual use of merge-recursive but the cherry-pick/revert porcelain does not expose the functionality. While at it, document the existing support for --strategy. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-02Documentation: Fix mark-up of lines with more than one tildeLibravatar Junio C Hamano1-1/+1
The manual pages of cherry-pick and revert had examples with two revisions on the same line in the examples section, that looked like this: git cherry-pick master~4 master~2:: Unfortunately, this is taken as a mark-up to make the part between two tildes, "4 master", subscript. Use {tilde} to make it explicit that we do want ~ characters in these places (backslash does not help). Reported-by: Sylvain Rabot <sylvain.rabot@f-secure.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-13Documentation: gitrevisions is in section 7Libravatar Jonathan Nieder1-1/+1
Fix references to gitrevisions(1) in the manual pages and HTML documentation. In practice, this will not matter much unless someone tries to use a hard copy of the git reference manual. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-05Documentation: link to gitrevisions rather than git-rev-parseLibravatar Michael J Gruber1-1/+1
Currently, whenever we need documentation for revisions and ranges, we link to the git-rev-parse man page, i.e. a plumbing man page, which has this along with the documentation of all rev-parse modes. Link to the new gitrevisions man page instead in all cases except - when the actual git-rev-parse command is referred to or - in very technical context (git-send-pack). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-02Documentation/revert: describe passing more than one commitLibravatar Christian Couder1-14/+37
And while at it, add an "EXAMPLES" section. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-2/+2
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2010-01-10Documentation: format full commands in typewriter fontLibravatar Thomas Rast1-2/+2
Use `code snippet` style instead of 'emphasis' for `git cmd ...` according to the following rules: * The SYNOPSIS sections are left untouched. * If the intent is that the user type the command exactly as given, it is `code`. If the user is only loosely referred to a command and/or option, it remains 'emphasised'. Signed-off-by: Thomas Rast <trast@student.ethz.ch>
2008-12-21git-revert documentation: refer to new HOWTO on reverting faulty mergesLibravatar Boyd Stephen Smith Jr1-0/+8
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-20Add hints to revert documentation about other ways to undo changesLibravatar Tarmigan Casebolt1-0/+9
Based on its name, people may read the 'git revert' documentation when they want to undo local changes, especially people who have used other SCM's. 'git revert' may not be what they had in mind, but git provides several other ways to undo changes to files. We can help them by pointing them towards the git commands that do what they might want to do. Cc: Daniel Barkalow <barkalow@iabervon.org> Cc: Lea Wiemann <lewiemann@gmail.com> Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'maint'Libravatar Junio C Hamano1-8/+8
* maint: Start preparing 1.5.6.4 release notes git fetch-pack: do not complain about "no common commits" in an empty repo rebase-i: keep old parents when preserving merges t7600-merge: Use test_expect_failure to test option parsing Fix buffer overflow in prepare_attr_stack Fix buffer overflow in git diff Fix buffer overflow in git-grep git-cvsserver: fix call to nonexistant cleanupWorkDir() Documentation/git-cherry-pick.txt et al.: Fix misleading -n description Conflicts: RelNotes
2008-07-16Documentation/git-cherry-pick.txt et al.: Fix misleading -n descriptionLibravatar Petr Baudis1-8/+8
The manual page of git-cherry-pick and git-revert asserts that -n works primarily on the working tree, while in fact the primary object it operates on is the index, and the changes only "accidentally" propagate to the working tree. This e.g. leads innocent #git IRC folks to believe that you can use -n to prepare changes for git-add -i staging. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-2/+2
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-4/+8
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-26Allow cherry-pick (and revert) to add signoff lineLibravatar Dan McGee1-1/+4
I often find myself pulling patches off of other peoples trees using cherry-pick, and following it with an immediate 'git commit --amend -s' command. Eliminate the need for a double commit by allowing signoff on a cherry-pick or revert. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-19doc typo: s/prior committing/prior to committing/Libravatar Jim Meyering1-1/+1
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-26revert/cherry-pick: work on merge commits as wellLibravatar Junio C Hamano1-1/+8
Usually you cannot revert a merge because you do not know which side of the merge should be considered the mainline (iow, what change to reverse). With this patch, cherry-pick and revert learn -m (--mainline) option that lets you specify the parent number (starting from 1) of the mainline, so that you can: git revert -m 1 $merge to reverse the changes introduced by the $merge commit relative to its first parent, and: git cherry-pick -m 2 $merge to replay the changes introduced by the $merge commit relative to its second parent. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-17Refer users to git-rev-parse for revision specification syntax.Libravatar Shawn O. Pearce1-0/+2
The revision specification syntax (sometimes referred to as SHA1-expressions) is accepted almost everywhere in Git by almost every tool. Unfortunately it is only documented in git-rev-parse.txt, and most users don't know to look there. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>