| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's not immediately obvious why --disk-usage might be a useful thing.
These examples show off a few of the real-world cases I've used it for.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently don't show any examples of using git-rev-list at all. Let's
add some pretty elementary examples. They likely seem obvious to anybody
who has worked with the tool for a while, but my purpose here is
two-fold:
- they may be enlightening to people who haven't used the tool a lot
to give a general flavor of how it is meant to be used
- they can serve as a starting point for adding more interesting
examples (we can do that without the basic ones, of course, but I
think it makes sense to show off the building blocks)
This set is far from exhaustive, but again, the purpose is to be a
starting point for further additions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git log` synopsis mentions `<revision range>`, and the description
of this option links to gitrevisions(7), but a nice explanation of
how a revision range can be constructed from individual commits,
optionnally prefixed with `^`, also exists in `rev-list-description.txt`.
Include this description in the man page for `git log`.
Add Asciidoc 'ifdef's to `rev-list-description.txt` so that either `git
rev-list` or `git log` appears in the respective man pages.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A following commit will reuse the description of the `git rev-list`
command in the `git log` manpage.
Move this description to a separate file.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tweak a sentence to make it a little more readable.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using '{caret}' inside double quotes and immediately following with a
single quoted word does not create the desired output: '<commit1>'
appears verbatim instead of being emphasized.
Use a litteral caret ('^') instead.
Also, remove the leading tabs in shell examples to bring them more in
line with the rest of the documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The synopsis section in git-rev-list.txt has grown to be a huge list
that probably needs its own synopsis. Since the list is huge, users may
be given the false impression that the list is complete, however it is
not. It is missing many of the available options.
Since the list of options in the synopsis is not only annoying but
actively harmful, replace it with `[<options>]` so users know to
explicitly look through the documentation for further information.
While we're at it, update the optional path notation so that it is more
modern.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow easier parsing by cat-file by giving rev-list an option to print
only the OID of a non-commit object without any additional information.
This is a short-term shim; later on, rev-list should be taught how to
print the types of objects it finds in a format similar to cat-file's.
Before this commit, the output from rev-list needed to be massaged
before being piped to cat-file, like so:
git rev-list --objects HEAD | cut -f 1 -d ' ' |
git cat-file --batch-check
This was especially unexpected when dealing with root trees, as an
invisible whitespace exists at the end of the OID:
git rev-list --objects --filter=tree:1 --max-count=1 HEAD |
xargs -I% echo "AA%AA"
Now, it can be piped directly, as in the added test case:
git rev-list --objects --no-object-names HEAD | git cat-file --batch-check
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Change-Id: I489bdf0a8215532e540175188883ff7541d70e1b
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Add t6112 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
|
|
We are about to add several new date formats which will make this list
too long to display in a single line.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's "ISO" date format does not really conform to the ISO 8601
standard due to small differences, and it cannot be parsed by ISO
8601-only parsers, e.g. those of XML toolchains.
The output from "--date=iso" deviates from ISO 8601 in these ways:
- a space instead of the `T` date/time delimiter
- a space between time and time zone
- no colon between hours and minutes of the time zone
Add a strict ISO 8601 date format for displaying committer and
author dates. Use the '%aI' and '%cI' format specifiers and add
'--date=iso-strict' or '--date=iso8601-strict' date format names.
See http://thread.gmane.org/gmane.comp.version-control.git/255879 and
http://thread.gmane.org/gmane.comp.version-control.git/52414/focus=52585
for discussion.
Signed-off-by: Beat Bolli <bbolli@ewanet.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bitmap reachability index used to speed up the counting objects
phase during `pack-objects` can also be used to optimize a normal
rev-list if the only thing required are the SHA1s of the objects during
the list (i.e., not the path names at which trees and blobs were found).
Calling `git rev-list --objects --use-bitmap-index [committish]` will
perform an object iteration based on a bitmap result instead of actually
walking the object graph.
These are some example timings for `torvalds/linux` (warm cache,
best-of-five):
$ time git rev-list --objects master > /dev/null
real 0m34.191s
user 0m33.904s
sys 0m0.268s
$ time git rev-list --objects --use-bitmap-index master > /dev/null
real 0m1.041s
user 0m0.976s
sys 0m0.064s
Likewise, using `git rev-list --count --use-bitmap-index` will speed up
the counting operation by building the resulting bitmap and performing a
fast popcount (number of bits set on the bitmap) on the result.
Here are some sample timings of different ways to count commits in
`torvalds/linux`:
$ time git rev-list master | wc -l
399882
real 0m6.524s
user 0m6.060s
sys 0m3.284s
$ time git rev-list --count master
399882
real 0m4.318s
user 0m4.236s
sys 0m0.076s
$ time git rev-list --use-bitmap-index --count master
399882
real 0m0.217s
user 0m0.176s
sys 0m0.040s
This also respects negative refs, so you can use it to count
a slice of history:
$ time git rev-list --count v3.0..master
144843
real 0m1.971s
user 0m1.932s
sys 0m0.036s
$ time git rev-list --use-bitmap-index --count v3.0..master
real 0m0.280s
user 0m0.220s
sys 0m0.056s
Though note that the closer the endpoints, the less it helps. In the
traversal case, we have fewer commits to cross, so we take less time.
But the bitmap time is dominated by generating the pack revindex, which
is constant with respect to the refs given.
Note that you cannot yet get a fast --left-right count of a symmetric
difference (e.g., "--count --left-right master...topic"). The slow part
of that walk actually happens during the merge-base determination when
we parse "master...topic". Even though a count does not actually need to
know the real merge base (it only needs to take the symmetric difference
of the bitmaps), the revision code would require some refactoring to
handle this case.
Additionally, a `--test-bitmap` flag has been added that will perform
the same rev-list manually (i.e. using a normal revwalk) and using
bitmaps, and verify that the results are the same. This can be used to
exercise the bitmap code, and also to verify that the contents of the
.bitmap file are sane.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
$ git log --encoding
fatal: Option '--encoding' requires a value
$ git rev-list --encoding
fatal: Option '--encoding' requires a value
The argument to --encoding has always been mandatory. Unfortunately
manpages like git-rev-list(1), git-log(1), and git-show(1) have
described the option's syntax as "--encoding[=<encoding>]" since it
was first documented. Clarify by removing the extra brackets.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of barfing, simply ignore bad object names seen in the
input. This is useful when reading from "git notes list" output
that may refer to objects that have already been garbage collected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
|
|
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* il/rev-glob:
Documentation: improve description of --glob=pattern and friends
rev-parse --branches/--tags/--remotes=pattern
rev-parse --glob
|
|
Since local branch, tags and remote tracking branch namespaces are
most often used, add shortcut notations for globbing those in
manner similar to --glob option.
With this, one can express the "what I have but origin doesn't?"
as:
'git log --branches --not --remotes=origin'
Original-idea-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --glob=<glob-pattern> option to rev-parse and everything that
accepts its options. This option matches all refs that match given
shell glob pattern (complete with some DWIM logic).
Example:
'git log --branches --not --glob=remotes/origin'
To show what you have that origin doesn't.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
|
|
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
|
|
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If one thinks of a revision as the set of commits which can be reached
from the rev, and of ^rev as the complement, then multiple arguments to
git rev-list can be neither understood as the intersection nor the union
of the individual sets.
But set language is the natural as well as logical language in which to
phrase this. So, add a paragraph which explains multiple arguments using
set language.
Suggested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
... because they show up in the man and html outputs.
This escaping is only needed for double dashes to be compatible with
older asciidoc versions; see commit e1ccf53 ([PATCH] Escape asciidoc's
built-in em-dash replacement, 2005-09-12).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These flags are already known to rev-parse and have the same meaning.
This patch allows to run gitk as follows:
gitk --branches --not --remotes
to show only your local work.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for -F | --fixed-strings option to "git log --grep"
and friends: "git log --author", "git log --committer=<pattern>".
Code is based on implementation of this option in "git grep".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the "This manual page describes only the most frequently used options."
text with the list of rev-list options in git-log manpage. (The git-diff-tree
options are already included.)
Move these options to a separate file and include it from both
git-rev-list.txt and git-log.txt.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Credit goes to Avi Kivity for noticing the lack of description in
rev-list manual page.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some uses of git-rev-list are to run it with --objects to see if
a range of objects between two or more commits is fully connected
or not. In such a case the caller doesn't care about the actual
object names or hash hints so formatting this data only for it to
be dumped to /dev/null by a redirect is a waste of CPU time. If
all the caller needs is the exit status then --quiet can be used
to bypass the commit and object formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Jeff King
Philippe Blain
Denton Liu
Emily Shaffer
Jeff Hostetler
Junio C Hamano
John Keeping
Lawrence Siebert
brian m. carlson
Beat Bolli
Vicent Marti
Jonathan Nieder
Thomas Ackermann
Michael J Gruber
Štěpán Němec
Christian Couder
Ilari Liusvaara
Thomas Rast
Ori Avtalion
SZEDER Gábor
Jonathan Nieder
Uwe Kleine-König
Jakub Narebski
Miklos Vajna
Dan McGee
Ralf Wildenhues
Shawn O. Pearce