summaryrefslogtreecommitdiff
path: root/Documentation/git-remote.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-06-10remote prune: print the list of pruned branchesLibravatar Olivier Marin1-4/+3
This command is really too quiet which make it unconfortable to use. Also implement a --dry-run option, in place of the original -n one, to list stale tracking branches that will be pruned, but do not actually prune them. Add a test case for --dry-run. Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-10remote show: fix the -n optionLibravatar Olivier Marin1-1/+1
The perl version accepted a -n flag, to show local informations only without querying remote heads, that seems to have been lost in the C revrite. This restores the older behaviour and add a test case. Signed-off-by: Olivier Marin <dkr@freesurf.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: add some long/short optionsLibravatar Stephan Beyer1-1/+9
Namely: git-clean.txt: --dry-run --quiet git-count-objects.txt: --verbose git-quiltimport.txt: -n git-remote.txt: -v --verbose Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-20Add a remote.*.mirror configuration optionLibravatar Paolo Bonzini1-2/+4
This patch adds a remote.*.mirror configuration option that, when set, automatically puts git-push in --mirror mode for that remote. Furthermore, the option is set automatically by `git remote add --mirror'. The code in remote.c to parse remote.*.skipdefaultupdate had a subtle problem: a comment in the code indicated that special care was needed for boolean options, but this care was not used in parsing the option. Since I was touching related code, I did this fix too. [jc: and I further fixed up the "ignore boolean" code.] Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-03git-remote documentation: fix synopsis to match descriptionLibravatar Jörg Sommer1-1/+1
In the text, the argument of -m is <master> which should be used in the command synopsis, too. Signed-off-by: Jörg Sommer <joerg@alea.gnuu.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-6/+6
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-19Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Documentation: Fix references to deprecated commands user-manual: mention "..." in "Generating diffs", etc. user-manual: Add section "Why bisecting merge commits can be harder ..." git-remote.txt: fix example url
2007-11-17git-remote.txt: fix example urlLibravatar J. Bruce Fields1-1/+1
If I'm going to use a real example as a URL, I suppose I should get it right.... Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-11-14Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: git-clean: honor core.excludesfile Documentation: Fix man page breakage with DocBook XSL v1.72 git-remote.txt: fix typo core-tutorial.txt: Fix argument mistake in an example. replace reference to git-rm with git-reset in git-commit doc Grammar fixes for gitattributes documentation Don't allow fast-import tree delta chains to exceed maximum depth revert/cherry-pick: allow starting from dirty work tree. t/t3404: fix test for a bogus todo file. Conflicts: fast-import.c
2007-11-14git-remote.txt: fix typoLibravatar Sergei Organov1-1/+1
Signed-off-by: Sergei Organov <osv@javad.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-18remote: document the 'rm' subcommandLibravatar James Bowes1-0/+6
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-03Teach "git remote" a mirror modeLibravatar Johannes Schindelin1-1/+5
When using the "--mirror" option to "git remote add", the refs will not be stored in the refs/remotes/ namespace, but in the same location as on the remote side. This option probably only makes sense in a bare repository. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-30Merge branch 'maint'Libravatar Junio C Hamano1-0/+7
* maint: Correct the name of NO_R_TO_GCC_LINKER in the comment describing it. git-remote: document -n repack: improve documentation on -a option
2007-06-30git-remote: document -nLibravatar Sam Vilain1-0/+7
The 'show' and 'prune' commands accept an option '-n'; document what it does. Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-05Documentation: fix typo in git-remote.txtLibravatar James Bowes1-1/+1
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-28Merge branch 'maint'Libravatar Junio C Hamano1-3/+14
* maint: Start preparing Release Notes for 1.5.0.3 Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name url Include config.mak in doc/Makefile git.el: Set the default commit coding system from the repository config. git-archimport: support empty summaries, put summary on a single line. http-push.c::lock_remote(): validate all remote refs. git-cvsexportcommit: don't cleanup .msg if not yet committed to cvs.
2007-02-28Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name urlLibravatar Junio C Hamano1-3/+14
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-26Merge branch 'maint'Libravatar Junio C Hamano1-0/+13
* maint: GIT 1.5.0.2 git-remote: support remotes with a dot in the name Documentation: describe "-f/-t/-m" options to "git-remote add" diff --cc: fix display of symlink conflicts during a merge.
2007-02-25Documentation: describe "-f/-t/-m" options to "git-remote add"Libravatar Junio C Hamano1-0/+13
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-20Allow git-remote to update named groups of remotesLibravatar Theodore Ts'o1-4/+7
In response to a feature request from Shawn Pearce, this patch allows a user to update a named group of remotes by using "git remote update <group>", where the group is defined in the config file by remotes.<group>. The default if the named group is not specified is now fetched group remotes.default, instead of remote.fetch, which is what had been previously used. In addition, if remotes.default is not defined, all remotes defined in the config file will be used, as before, but there is now also possible to request that a particular repository to be skipped by default by using the boolean configuration parameter remote.<name>.skipDefaultUpdate. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-19Teach git-remote to update existing remotes by fetching from themLibravatar Theodore Ts'o1-1/+9
This allows users to use the command "git remote update" to update all remotes that are being tracked in the repository. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-03Cleanup subcommand documentation for git-remote.Libravatar Shawn O. Pearce1-4/+19
Jakub Narebski pointed out the positional notation in git-remote's documentation was very confusing, especially now that we have 3 supported subcommands. Instead of referring to subcommands by position, refer to them by name. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-01Teach 'git remote' how to cleanup stale tracking branches.Libravatar Shawn O. Pearce1-0/+5
Since it can be annoying to manually cleanup 40 tracking branches which were removed by the remote system, 'git remote prune <n>' can now be used to delete any tracking branches under <n> which are no longer available on the remote system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28[PATCH] Rename git-repo-config to git-config.Libravatar Tom Prince1-2/+2
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-08Documentation: add git-remote man pageLibravatar J. Bruce Fields1-0/+76
Add a preliminary man page for git-remote. Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 19:46:29 +0000