summaryrefslogtreecommitdiff
path: root/Documentation/git-receive-pack.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-3/+3
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-10-24Use 'fast-forward' all over the placeLibravatar Felipe Contreras1-1/+1
It's a compound word. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Documentation: fix typos, grammar, asciidoc syntaxLibravatar Markus Heidelberg1-2/+2
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-6/+6
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-8/+8
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-5/+5
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24Documentation: Correct various misspellings and typos.Libravatar Brian Hetro1-1/+1
Fix minor typos throughout the documentation. Signed-off-by: Brian Hetro <whee@smaertness.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Documentation: quote {non-attributes} for asciidocLibravatar Jeff King1-5/+5
Asciidoc treats {foo} as an attribute to be substituted; if 'foo' doesn't exist as an attribute, then the entire line gets dropped. When the literal {foo} is desired, \{foo} is required. The exceptions to this rule are: - inside literal blocks - if the 'foo' contains non-alphanumeric characters (e.g., {foo|bar} is assumed not to be an attribute) Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-03-11Change {pre,post}-receive hooks to use stdinLibravatar Shawn O. Pearce1-16/+16
Sergey Vlasov, Andy Parkins and Alex Riesen all pointed out that it is possible for a single invocation of receive-pack to be given more refs than the OS might allow us to pass as command line parameters to a single hook invocation. We don't want to break these up into multiple invocations (like xargs might do) as that makes it impossible for the pre-receive hook to verify multiple related ref updates occur at the same time, and it makes it harder for post-receive to send out a single batch notification. Instead we pass the reference data on a pipe connected to the hook's stdin, supplying one ref per line to the hook. This way a single hook invocation can obtain an infinite amount of ref data, without bumping into any operating system limits. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-07Teach receive-pack to run pre-receive/post-receive hooksLibravatar Shawn O. Pearce1-42/+107
Bill Lear pointed out that it is easy to send out notifications of changes with the update hook, but successful execution of the update hook does not necessarily mean that the ref was actually updated. Lock contention on the ref or being unable to append to the reflog may prevent the ref from being changed. Sending out notifications prior to the ref actually changing is very misleading. To help this situation I am introducing two new hooks to the receive-pack flow: pre-receive and post-receive. These new hooks are invoked only once per receive-pack execution and are passed three arguments per ref (refname, old-sha1, new-sha1). The new post-receive hook is ideal for sending out notifications, as it has the complete list of all refnames that were successfully updated as well as the old and new SHA-1 values. This allows more interesting notifications to be sent. Multiple ref updates could be easily summarized into one email, for example. The new pre-receive hook is ideal for logging update attempts, as it is run only once for the entire receive-pack operation. It can also be used to verify multiple updates happen at once, e.g. an update to the `maint` head must also be accompained by a new annotated tag. Lots of documentation improvements for receive-pack are included in this change, as we want to make sure the new hooks are clearly explained. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20Document receive.denyNonFastforwardsLibravatar Johannes Schindelin1-0/+2
[jc: with a fix to config handling in t5400 test, which took annoyingly long to diagnose.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-21Retire git-clone-packLibravatar Junio C Hamano1-2/+1
The program is not used by git-clone since git-fetch-pack was extended to allow its caller do what git-clone-pack alone did, and git-clone was updated to use it. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-05Documentation: push/receive hook references.Libravatar Junio C Hamano1-0/+4
Mention documentation pages that talk about update and post-update hooks from git-push, because a frequently asked question is "I want X to happen when I push" and people would not know to look at git-receive-pack documentation until they understand that is what runs on the other end. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-2/+2
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-02Document hooks.Libravatar Junio C Hamano1-0/+6
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-02receive-pack hooks updates.Libravatar Junio C Hamano1-20/+20
The earlier one conflated update and post-update hooks for no good reason. Correct that ugly hack. Now post-update hooks will take the list of successfully updated refs. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-31[PATCH] Added hook in git-receive-packLibravatar Josef Weidendorfer1-0/+49
Just before updating a ref, $GIT_DIR/hooks/update refname old-sha1 new-sha1 is called if executable. The hook can decline the ref to be updated by exiting with a non-zero status, or allow it to be updated by exiting with a zero status. The mechanism also allows e.g sending of a mail with pushed commits on the remote repository. Documentation update with an example hook is included. jc: The credits of the basic idea and initial implementation go to Josef, but I ended up rewriting major parts of his patch, so bugs are all mine. Also I changed the semantics for the hook from his original version (which were post-update hook) so that the hook can optionally decline to update the ref, and also can be used to implement the overall cleanups. The latter was primarily to implement a suggestion from Linus that calling update-server-info should be made optional. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-14[PATCH] Documentation: send/receive.Libravatar Junio C Hamano1-0/+41
This adds documentation for 'smarter push' family of commands. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>