| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted by Junio:
Back when "git am" was written, it was not considered a bug that the
"git am --resolved" option did not offer the user a chance to update
the log message to match the adjustment of the code the user made,
but honestly, I'd have to say that it is a bug in "git am" in that
over time it wasn't adjusted to the new world order where we
encourage users to describe what they did when the automation
hiccuped by opening an editor. These days, even when automation
worked well (e.g. a clean auto-merge with "git merge"), we open an
editor. The world has changed, and so should the expectations.
Junio also suggested providing a workaround such as allowing --no-edit
together with git rebase --continue, but that should probably be done in
a patch after the git-2.26.0 release. For now, just document the known
difference in the Behavioral Differences section.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The am-backend drops information and thus limits what we can do:
* lack of full tree information from the original commits means we
cannot do directory rename detection and warn users that they might
want to move some of their new files that they placed in old
directories to prevent their becoming orphaned.[1]
* reduction in context from only having a few lines beyond those
changed means that when context lines are non-unique we can apply
patches incorrectly.[2]
* lack of access to original commits means that conflict marker
annotation has less information available.
* the am backend has safety problems with an ill-timed interrupt.
Also, the merge/interactive backend have far more abilities, appear to
currently have a slight performance advantage[3] and have room for more
optimizations than the am backend[4] (and work is underway to take
advantage of some of those possibilities).
[1] https://lore.kernel.org/git/xmqqh8jeh1id.fsf@gitster-ct.c.googlers.com/
[2] https://lore.kernel.org/git/CABPp-BGiu2nVMQY_t-rnFR5GQUz_ipyEE8oDocKeO+h+t4Mn4A@mail.gmail.com/
[3] https://public-inbox.org/git/CABPp-BF=ev03WgODk6TMQmuNoatg2kiEe5DR__gJ0OTVqHSnfQ@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BGh7yW69QwxQb13K0HM38NKmQif3A6C6UULEKYnkEJ5vA@mail.gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
"git rebase -i" learned a few options that are known by "git
rebase" proper.
* ra/rebase-i-more-options:
rebase -i: finishing touches to --reset-author-date
rebase: add --reset-author-date
rebase -i: support --ignore-date
sequencer: rename amend_author to author_to_rename
rebase -i: support --committer-date-is-author-date
sequencer: allow callers of read_author_script() to ignore fields
rebase -i: add --ignore-whitespace flag
|
|
Clarify the way the `--reset-author-date` option is described,
and mark its usage string translatable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --preserve-merges was deprecated in 427c3bd28a a sentence
was introduced describing the difference between --rebase-merges and
--preserve-merges which is a little unclear and difficult to parse.
This patch improves readability while retaining original meaning.
Signed-off-by: Naveen Nathan <naveen@lastninja.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit introduced --ignore-date flag to interactive
rebase, but the name is actually very vague in context of rebase -i
since there are two dates we can work with. Add an alias to convey
the precise purpose.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase am already has this flag to "lie" about the author date
by changing it to the committer (current) date. Let's add the same
for interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase am already has this flag to "lie" about the committer date
by changing it to the author date. Let's add the same for
interactive machinery.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two backends available for rebasing, viz, the am and the
interactive. Naturally, there shall be some features that are
implemented in one but not in the other. One such flag is
--ignore-whitespace which indicates merge mechanism to treat lines
with only whitespace changes as unchanged. Wire the interactive
rebase to also understand the --ignore-whitespace flag by
translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
|
|
Start discouraging the use of "git filter-branch".
* en/filter-branch-deprecation:
t9902: use a non-deprecated command for testing
Recommend git-filter-repo instead of git-filter-branch
t6006: simplify, fix, and optimize empty message test
|
|
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
|
|
filter-branch suffers from a deluge of disguised dangers that disfigure
history rewrites (i.e. deviate from the deliberate changes). Many of
these problems are unobtrusive and can easily go undiscovered until the
new repository is in use. This can result in problems ranging from an
even messier history than what led folks to filter-branch in the first
place, to data loss or corruption. These issues cannot be backward
compatibly fixed, so add a warning to both filter-branch and its manpage
recommending that another tool (such as filter-repo) be used instead.
Also, update other manpages that referenced filter-branch. Several of
these needed updates even if we could continue recommending
filter-branch, either due to implying that something was unique to
filter-branch when it applied more generally to all history rewriting
tools (e.g. BFG, reposurgeon, fast-import, filter-repo), or because
something about filter-branch was used as an example despite other more
commonly known examples now existing. Reword these sections to fix
these issues and to avoid recommending filter-branch.
Finally, remove the section explaining BFG Repo Cleaner as an
alternative to filter-branch. I feel somewhat bad about this,
especially since I feel like I learned so much from BFG that I put to
good use in filter-repo (which is much more than I can say for
filter-branch), but keeping that section presented a few problems:
* In order to recommend that people quit using filter-branch, we need
to provide them a recomendation for something else to use that
can handle all the same types of rewrites. To my knowledge,
filter-repo is the only such tool. So it needs to be mentioned.
* I don't want to give conflicting recommendations to users
* If we recommend two tools, we shouldn't expect users to learn both
and pick which one to use; we should explain which problems one
can solve that the other can't or when one is much faster than
the other.
* BFG and filter-repo have similar performance
* All filtering types that BFG can do, filter-repo can also do. In
fact, filter-repo comes with a reimplementation of BFG named
bfg-ish which provides the same user-interface as BFG but with
several bugfixes and new features that are hard to implement in
BFG due to its technical underpinnings.
While I could still mention both tools, it seems like I would need to
provide some kind of comparison and I would ultimately just say that
filter-repo can do everything BFG can, so ultimately it seems that it
is just better to remove that section altogether.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common scenario is if a user is working on a topic branch and they
wish to make some changes to intermediate commits or autosquash, they
would run something such as
git rebase -i --onto master... master
in order to preserve the merge base. This is useful when contributing a
patch series to the Git mailing list, one often starts on top of the
current 'master'. While developing the patches, 'master' is also
developed further and it is sometimes not the best idea to keep rebasing
on top of 'master', but to keep the base commit as-is.
In addition to this, a user wishing to test individual commits in a
topic branch without changing anything may run
git rebase -x ./test.sh master... master
Since rebasing onto the merge base of the branch and the upstream is
such a common case, introduce the --keep-base option as a shortcut.
This allows us to rewrite the above as
git rebase -i --keep-base master
and
git rebase -x ./test.sh --keep-base master
respectively.
Add tests to ensure --keep-base works correctly in the normal case and
fails when there are multiple merge bases, both in regular and
interactive mode. Also, test to make sure conflicting options cause
rebase to fail. While we're adding test cases, add a missing
set_fake_editor call to 'rebase -i --onto master...side'.
While we're documenting the --keep-base option, change an instance of
"merge-base" to "merge base", which is the consistent spelling.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support merge strategies in the sequencer, but only for
`pick` commands.
With this commit, we now also support them in `merge` commands. The
approach is simple: if any merge strategy option is specified, or if any
merge strategy other than `recursive` is specified, we simply spawn the
`git merge` command. Otherwise, we handle the merge in-process just as
before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
Docfix.
* pw/doc-synopsis-markup-opmode-options:
show --continue/skip etc. consistently in synopsis
|
|
Command mode options that the user can choose one among many are
listed like this in the documentation:
git am (--continue | --skip | --abort | --quit)
They are listed on a single line and in parenthesis, because they
are not optional.
But documentation pages for some commands deviate from this norm.
Fix the merge and rebase docs to match this style.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
|
|
The `--preserve-merges` option is now deprecated in favor of
`--rebase-merges`; Let's stop recommending the former.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc updates.
* pw/rerere-autoupdate:
merge: tweak --rerere-autoupdate documentation
am/cherry-pick/rebase/revert: document --rerere-autoupdate
|
|
"git rebase --rebase-merges" replaces its old "--preserve-merges"
option; the latter is now marked as deprecated.
* js/rebase-deprecate-preserve-merges:
rebase: deprecate --preserve-merges
|
|
The new command "git switch" is added to avoid the confusion of
one-command-do-all "git checkout" for new users. They are also helpful
to avoid ambiguation context.
For these reasons, promote it everywhere possible. This includes
documentation, suggestions/advice from other commands...
The "Checking out files" progress line in unpack-trees.c is also updated
to "Updating files" to be neutral to both git-checkout and git-switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option was missing from the man pages of these commands.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have something much better now: --rebase-merges (which is a
complete re-design --preserve-merges, with a lot of issues fixed such as
the inability to reorder commits with --preserve-merges).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* js/rebase-recreate-merge:
rebase docs: fix "gitlink" typo
|
|
Change it to "linkgit" so that the reference is properly rendered.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ea/rebase-compat-doc-fix:
docs/git-rebase: remove redundant entry in incompatible options list
|
|
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
git-rebase.txt: update to reflect merge now implemented on sequencer
|
|
Since commit 8fe9c3f21dff (Merge branch 'en/rebase-merge-on-sequencer',
2019-02-06), --merge now uses the interactive backend (and matches its
behavior) so there is no separate merge backend anymore. Fix an
oversight in the docs that should have been updated with the previous
change.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --autosquash option is implied by the earlier --[no-]autosquash
entry in the list.
Signed-off-by: Emilio Cobos Álvarez <emilio@crisal.io>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
|
|
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
|
|
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
This reverts commit 81ef8ee75d5f348d3c71ff633d13d302124e1a5e.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
|
|
Doc update.
* en/directory-renames-nothanks-doc-update:
git-rebase.txt: update note about directory rename detection and am
|
|
Doc update.
* km/rebase-doc-typofix:
rebase docs: drop stray word in merge command description
|
|
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a bit cumbersome to write out the `--reschedule-failed-exec`
option before `-x <cmd>` all the time; let's introduce a convenient
option to do both at the same time: `-y <cmd>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common use case for the `--exec` option is to verify that each commit
in a topic branch compiles cleanly, via `git rebase -x make <base>`.
However, when an `exec` in such a rebase fails, it is not re-scheduled,
which in this instance is not particularly helpful.
Let's offer a flag to reschedule failed `exec` commands.
Based on an idea by Paul Morelle.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Delete a misplaced word introduced by caafecfcf1 (rebase
--rebase-merges: adjust man page for octopus support, 2018-03-09).
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 6aba117d5cf7 ("am: avoid directory rename detection when
calling recursive merge machinery", 2018-08-29), the git-rebase manpage
probably should have also been updated to note the stronger
incompatibility between git-am and directory rename detection. Update
it now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Đoàn Trần Công Danh
Elijah Newren
Junio C Hamano
Naveen Nathan
Rohit Ashiwal
Denton Liu
Johannes Schindelin
Phillip Wood
Nguyễn Thái Ngọc Duy
Kyle Meyer
Emilio Cobos Álvarez