| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Doc update.
* ws/refer-to-forkpoint-config-in-rebase-doc:
Document `rebase.forkpoint` in rebase man page
|
|
The configuration option `rebase.forkpoint' is only mentioned in the man
page of git-config(1). Since it is a configuration for rebase, mention
it in the documentation of rebase at the --fork-point/--no-fork-point
section. This will help users set a preferred default for their
workflow.
Signed-off-by: Wesley Schwengle <wesley@opperschaap.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" by default skips changes that are equivalent to
commits that are already in the history the branch is rebased onto;
give messages when this happens to let the users be aware of
skipped commits, and also teach them how to tell "rebase" to keep
duplicated changes.
* js/advise-when-skipping-cherry-picked:
sequencer: advise if skipping cherry-picked commit
|
|
Silently skipping commits when rebasing with --no-reapply-cherry-picks
(currently the default behavior) can cause user confusion. Issue
warnings when this happens, as well as advice on how to preserve the
skipped commits.
These warnings and advice are displayed only when using the (default)
"merge" rebase backend.
Update the git-rebase docs to mention the warnings and advice.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it clear that `ort` is the default merge strategy now rather than
`recursive`, including moving `ort` to the front of the list of merge
strategies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 58634dbff8 ("rebase: Allow merge strategies to be used when
rebasing", 2006-06-21) added the --merge option to git-rebase so that
renames could be detected (at least when using the `recursive` merge
backend). However, git-am -3 gained that same ability in commit
579c9bb198 ("Use merge-recursive in git-am -3.", 2006-12-28). As such,
the comment about being able to detect renames is not particularly
noteworthy. Remove it.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few places in the documentation referred to the "`recursive` strategy"
using the phrase "`git merge-recursive`", suggesting that it was forking
subprocesses to call a toplevel builtin. Perhaps that was relevant to
when rebase was a shell script, but it seems like a rather indirect way
to refer to the `recursive` strategy. Simplify the references.
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --rebase-merges was first introduced, it only worked with the
`recursive` strategy. Some time later, it gained support for merges
using the `octopus` strategy. The limitation of only supporting these
two strategies was documented in 25cff9f109 ("rebase -i --rebase-merges:
add a section to the man page", 2018-04-25) and lifted in e145d99347
("rebase -r: support merge strategies other than `recursive`",
2019-07-31). However, when the limitation was lifted, the documentation
was not updated. Update it now.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase --[no-]reschedule-failed-exec" did not work well with
its configuration variable, which has been corrected.
* ab/rebase-no-reschedule-failed-exec:
rebase: don't override --no-reschedule-failed-exec with config
rebase tests: camel-case rebase.rescheduleFailedExec consistently
|
|
Re-order the sections of a few manual pages to be consistent with the
entirety of the rest of our documentation. This allows us to remove
the just-added whitelist of "bad" order from
lint-man-section-order.perl.
I'm doing that this way around so that code will be easy to dig up if
we'll need it in the future. I've intentionally not added some other
sections such as EXAMPLES to the list of known sections.
If we were to add that we'd find some out of order. Perhaps we'll want
to order those consistently as well in the future, at which point
whitelisting some of them might become handy again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a bug in how --no-reschedule-failed-exec interacts with
rebase.rescheduleFailedExec=true being set in the config. Before this
change the --no-reschedule-failed-exec config option would be
overridden by the config.
This bug happened because of the particulars of how "rebase" works
v.s. most other git commands when it comes to parsing options and
config:
When we read the config and parse the CLI options we correctly prefer
the --no-reschedule-failed-exec option over
rebase.rescheduleFailedExec=true in the config. So far so good.
However the --reschedule-failed-exec option doesn't take effect when
the rebase starts (we'd just create a
".git/rebase-merge/reschedule-failed-exec" file if it was true). It
only takes effect when the exec command fails, at which point we'll
reschedule the failed "exec" command.
Since we only wrote out the positive
".git/rebase-merge/reschedule-failed-exec" under
--reschedule-failed-exec, but nothing with --no-reschedule-failed-exec
we'll forget that we asked not to reschedule failed "exec", and would
happily re-read the config and see that
rebase.rescheduleFailedExec=true is set.
So the config will effectively override the user having explicitly
disabled the option on the command-line.
Even more confusingly: Since rebase accepts different options based on
its state there wasn't even a way to get around this with "rebase
--continue --no-reschedule-failed-exec" (but you could of course set
the config with "rebase -c ...").
I think the least bad way out of this is to declare that for such
options and config whatever we decide at the beginning of the rebase
goes. So we'll now always create either a "reschedule-failed-exec" or
a "no-reschedule-failed-exec file at the start, not just the former if
we decided we wanted the feature.
With this new worldview you can no longer change the setting once a
rebase has started except by manually removing the state files
discussed above. I think making it work like that is the the least
confusing thing we can do.
In the future we might want to learn to change the setting in the
middle by combining "--edit-todo" with
"--[no-]reschedule-failed-exec", we currently don't support combining
those options, or any other way to change the state in the middle of
the rebase short of manually editing the files in
".git/rebase-merge/*".
The bug being fixed here originally came about because of a
combination of the behavior of the code added in d421afa0c66 (rebase:
introduce --reschedule-failed-exec, 2018-12-10) and the addition of
the config variable in 969de3ff0e0 (rebase: add a config option to
default to --reschedule-failed-exec, 2018-12-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Charvi Mendiratta <charvi077@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* pb/doc-sequence-editor-configuration:
doc: mention GIT_SEQUENCE_EDITOR and 'sequence.editor' more
|
|
"git rebase -i" learns a bit more options.
* pw/rebase-i-more-options:
t3436: do not run git-merge-recursive in dashed form
rebase: add --reset-author-date
rebase -i: support --ignore-date
rebase -i: support --committer-date-is-author-date
am: stop exporting GIT_COMMITTER_DATE
rebase -i: add --ignore-whitespace flag
|
|
The environment variable `GIT_SEQUENCE_EDITOR`, and the configuration
variable 'sequence.editor', which were added in 821881d88d ("rebase -i":
support special-purpose editor to edit insn sheet, 2011-10-17), are
mentioned in the `git config` man page but not anywhere else.
Include `config/sequencer.txt` in `git-rebase.txt`, so that both the
environment variable and the configuration setting are mentioned there.
Also, add `GIT_SEQUENCE_EDITOR` to the list of environment variables
in `git(1)`.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit introduced --ignore-date flag to rebase -i, but the
name is rather vague as it does not say whether the author date or the
committer date is ignored. Add an alias to convey the precise purpose.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the --ignore-date
option to the merge backend. This option uses the current time as the
author date rather than reusing the original author date when
rewriting commits. We take care to handle the combination of
--ignore-date and --committer-date-is-author-date in the same way as
the apply backend.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the
--committer-date-is-author-date option to the merge backend. This
option uses the author date of the commit that is being rewritten as
the committer date when the new commit is created.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the
--ignore-whitespace option to the merge backend. This option treats
lines with only whitespace changes as unchanged and is implemented in
the merge backend by translating it to -Xignore-space-change.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* ma/rebase-doc-typofix:
git-rebase.txt: fix description list separator
|
|
We don't give a "::" for the list separator, but just a single ":". This
ends up rendering literally, "--apply: Use applying strategies ...". As
a follow-on error, the list continuation, "+", also ends up rendering
literally (because we don't have a list).
This was introduced in 52eb738d6b ("rebase: add an --am option",
2020-02-15) and survived the rename in 10cdb9f38a ("rebase: rename the
two primary rebase backends", 2020-02-15).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In documentation pertaining to autostash behavior, we refer to the
"stash reflog". This description is too low-level as the reflog refers
to an implementation detail of how the stash works and, for end-users,
they do not need to be aware of this at all.
Change references of "stash reflog" to "stash list", which should
provide more accessible terminology for end-users.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Incompatible options "--root" and "--fork-point" of "git rebase"
have been marked and documented as being incompatible.
* en/rebase-root-and-fork-point-are-incompatible:
rebase: display an error if --root and --fork-point are both provided
|
|
The stash entry created by "git rebase --autosquash" to keep the
initial dirty state were discarded by mistake upon "git rebase
--quit", which has been corrected.
* dl/merge-autostash-rebase-quit-fix:
rebase: save autostash entry into stash reflog on --quit
|
|
"git rebase" happens to call some hooks meant for "checkout" and
"commit" by this was not a designed behaviour than historical
accident. This has been documented.
* en/rebase-doc-hooks-called-by-accident:
git-rebase.txt: add another hook to the hooks section, and explain more
|
|
In a03b55530a (merge: teach --autostash option, 2020-04-07), the
--autostash option was introduced for `git merge`. Notably, when
`git merge --quit` is run with an autostash entry present, it is saved
into the stash reflog. This is contrasted with the current behaviour of
`git rebase --quit` where the autostash entry is simply just dropped out
of existence.
Adopt the behaviour of `git merge --quit` in `git rebase --quit` and
save the autostash entry into the stash reflog instead of just deleting
it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--root implies we want to rebase all commits since the beginning of
history. --fork-point means we want to use the reflog of the specified
upstream to find the best common ancestor between <upstream> and
<branch> and only rebase commits since that common ancestor. These
options are clearly contradictory, so throw an error (instead of
segfaulting on a NULL pointer) if both are specified.
Reported-by: Alexander Berg <alexander.berg@atos.net>
Documentation-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git rebase" to reapply all local commits, even if the may be
already in the upstream, without checking first.
* jt/rebase-allow-duplicate:
rebase --merge: optionally skip upstreamed commits
|
|
"git rebase" (again) learns to honor "--no-keep-empty", which lets
the user to discard commits that are empty from the beginning (as
opposed to the ones that become empty because of rebasing). The
interactive rebase also marks commits that are empty in the todo.
* en/rebase-no-keep-empty:
rebase: fix an incompatible-options error message
rebase: reinstate --no-keep-empty
rebase -i: mark commits that begin empty in todo editor
|
|
"git rebase" learned the "--no-gpg-sign" option to countermand
commit.gpgSign the user may have.
* dd/no-gpg-sign:
Documentation: document merge option --no-gpg-sign
Documentation: merge commit-tree --[no-]gpg-sign
Documentation: reword commit --no-gpg-sign
Documentation: document am --no-gpg-sign
cherry-pick/revert: honour --no-gpg-sign in all case
rebase.c: honour --no-gpg-sign
|
|
Typofix.
* pb/rebase-doc-typofix:
git-rebase.txt: fix typo
|
|
When rebasing against an upstream that has had many commits since the
original branch was created:
O -- O -- ... -- O -- O (upstream)
\
-- O (my-dev-branch)
it must read the contents of every novel upstream commit, in addition to
the tip of the upstream and the merge base, because "git rebase"
attempts to exclude commits that are duplicates of upstream ones. This
can be a significant performance hit, especially in a partial clone,
wherein a read of an object may end up being a fetch.
Add a flag to "git rebase" to allow suppression of this feature. This
flag only works when using the "merge" backend.
This flag changes the behavior of sequencer_make_script(), called from
do_interactive_rebase() <- run_rebase_interactive() <-
run_specific_rebase() <- cmd_rebase(). With this flag, limit_list()
(indirectly called from sequencer_make_script() through
prepare_revision_walk()) will no longer call cherry_pick_list(), and
thus PATCHSAME is no longer set. Refraining from setting PATCHSAME both
means that the intermediate commits in upstream are no longer read (as
shown by the test) and means that no PATCHSAME-caused skipping of
commits is done by sequencer_make_script(), either directly or through
make_script_with_merges().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit d48e5e21da ("rebase (interactive-backend): make --keep-empty the
default", 2020-02-15) turned --keep-empty (for keeping commits which
start empty) into the default. The logic underpinning that commit was:
1) 'git commit' errors out on the creation of empty commits without an
override flag
2) Once someone determines that the override is worthwhile, it's
annoying and/or harmful to required them to take extra steps in
order to keep such commits around (and to repeat such steps with
every rebase).
While the logic on which the decision was made is sound, the result was
a bit of an overcorrection. Instead of jumping to having --keep-empty
being the default, it jumped to making --keep-empty the only available
behavior. There was a simple workaround, though, which was thought to
be good enough at the time. People could still drop commits which
started empty the same way the could drop any commits: by firing up an
interactive rebase and picking out the commits they didn't want from the
list. However, there are cases where external tools might create enough
empty commits that picking all of them out is painful. As such, having
a flag to automatically remove start-empty commits may be beneficial.
Provide users a way to drop commits which start empty using a flag that
existed for years: --no-keep-empty. Interpret --keep-empty as
countermanding any previous --no-keep-empty, but otherwise leaving
--keep-empty as the default.
This might lead to some slight weirdness since commands like
git rebase --empty=drop --keep-empty
git rebase --empty=keep --no-keep-empty
look really weird despite making perfect sense (the first will drop
commits which become empty, but keep commits that started empty; the
second will keep commits which become empty, but drop commits which
started empty). However, --no-keep-empty was named years ago and we are
predominantly keeping it for backward compatibility; also we suspect it
will only be used rarely since folks already have a simple way to drop
commits they don't want with an interactive rebase.
Reported-by: Bryan Turner <bturner@atlassian.com>
Reported-by: Sami Boukortt <sami@boukortt.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While many users who intentionally create empty commits do not want them
thrown away by a rebase, there are third-party tools that generate empty
commits that a user might not want. In the past, users have used rebase
to get rid of such commits (a side-effect of the fact that the --apply
backend is not currently capable of keeping them). While such users
could fire up an interactive rebase and just remove the lines
corresponding to empty commits, that might be difficult if the
third-party tool generates many of them. Simplify this task for users
by marking such lines with a suffix of " # empty" in the todo list.
Suggested-by: Sami Boukortt <sami@boukortt.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For more discussion about these hooks, their history relative to rebase,
and logical consistency between different types of operations, see
https://lore.kernel.org/git/CABPp-BG0bFKUage5cN_2yr2DkmS04W2Z9Pg5WcROqHznV3XBdw@mail.gmail.com/
and the links to some threads referenced therein.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted by Junio:
Back when "git am" was written, it was not considered a bug that the
"git am --resolved" option did not offer the user a chance to update
the log message to match the adjustment of the code the user made,
but honestly, I'd have to say that it is a bug in "git am" in that
over time it wasn't adjusted to the new world order where we
encourage users to describe what they did when the automation
hiccuped by opening an editor. These days, even when automation
worked well (e.g. a clean auto-merge with "git merge"), we open an
editor. The world has changed, and so should the expectations.
Junio also suggested providing a workaround such as allowing --no-edit
together with git rebase --continue, but that should probably be done in
a patch after the git-2.26.0 release. For now, just document the known
difference in the Behavioral Differences section.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The am-backend drops information and thus limits what we can do:
* lack of full tree information from the original commits means we
cannot do directory rename detection and warn users that they might
want to move some of their new files that they placed in old
directories to prevent their becoming orphaned.[1]
* reduction in context from only having a few lines beyond those
changed means that when context lines are non-unique we can apply
patches incorrectly.[2]
* lack of access to original commits means that conflict marker
annotation has less information available.
* the am backend has safety problems with an ill-timed interrupt.
Also, the merge/interactive backend have far more abilities, appear to
currently have a slight performance advantage[3] and have room for more
optimizations than the am backend[4] (and work is underway to take
advantage of some of those possibilities).
[1] https://lore.kernel.org/git/xmqqh8jeh1id.fsf@gitster-ct.c.googlers.com/
[2] https://lore.kernel.org/git/CABPp-BGiu2nVMQY_t-rnFR5GQUz_ipyEE8oDocKeO+h+t4Mn4A@mail.gmail.com/
[3] https://public-inbox.org/git/CABPp-BF=ev03WgODk6TMQmuNoatg2kiEe5DR__gJ0OTVqHSnfQ@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BGh7yW69QwxQb13K0HM38NKmQif3A6C6UULEKYnkEJ5vA@mail.gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
Junio C Hamano
Wesley Schwengle
Josh Steadmon
Elijah Newren
Ævar Arnfjörð Bjarmason
Charvi Mendiratta
Bradley M. Kuhn
Philippe Blain
Rohit Ashiwal
Phillip Wood
Martin Ågren
Denton Liu
Jonathan Tan
Đoàn Trần Công Danh