| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* maint:
Let check_preimage() use memset() to initialize "struct checkout"
fetch/push: fix usage strings
|
|
- use "<options>" instead of just "options".
- use "[<repository> [<refspec>...]]" to indicate that <repository> and
<refspec> are optional, and that <refspec> cannot be specified
without specifying <repository>.
Note that when called without specifying <repository> (eg. "git fetch
-f"), it is accurate to say that the "git fetch [<options>]
[<repository> ...]" case takes precedence over "git fetch [<options>]
<group>".
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description for --thin was misleading and downright wrong. Correct
it with some inspiration from the description of index-pack's --fix-thin
and some background information from Nicolas Pitre <nico@fluxnic.net>.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we
may also consult the packed refs mechanism. These days we tend to treat
the "refs hierarchy" as more of an abstract namespace that happens to be
represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at
worst it can confuse users who then look in $GIT_DIR/refs and find that it
is missing some of the refs they expected to see.
This patch drops most uses of "$GIT_DIR/refs/*", changing them into just
"refs/*", under the assumption that users can handle the concept of an
abstract refs namespace. There are a few things to note:
- most cases just dropped the $GIT_DIR/ portion. But for cases where
that left _just_ the word "refs", I changed it to "refs/" to help
indicate that it was a hierarchy. I didn't do the same for longer
paths (e.g., "refs/heads" remained, instead of becoming
"refs/heads/").
- in some cases, no change was made, as the text was explicitly about
unpacked refs (e.g., the discussion in git-pack-refs).
- In some cases it made sense instead to note the existence of packed
refs (e.g., in check-ref-format and rev-parse).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
blame: prevent a segv when -L given start > EOF
git-push: document all the status flags used in the output
Fix parsing of imap.preformattedHTML and imap.sslverify
git-add documentation: Fix shell quoting example
|
|
* jc/maint-push-doc-status:
git-push: document all the status flags used in the output
|
|
We didn't talk about '-' (deletion), '*' (addition), nor '+' (forced).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e9fcd1e (Add push --set-upstream, 2010-01-16) inadvertently patched
the description of --upstream in the middle of that of --repo.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
|
|
Frequent complaint is lack of easy way to set up upstream (tracking)
references for git pull to work as part of push command. So add switch
--set-upstream (-u) to do just that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Refspecs without a source side have been reported as confusing by many.
As an alternative, this adds support for commands like:
git push origin --delete somebranch
git push origin --delete tag sometag
Specifically, --delete will prepend a colon to all colon-less refspecs
given on the command line, and will refuse to accept refspecs with
colons to prevent undue confusion.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/doc-fast-forward:
Use 'fast-forward' all over the place
Conflicts:
builtin-merge.c
|
|
It's a compound word.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-push is not currently using -n for anything else, and it seems
unlikely we will want to use it to mean anything else in the future,
so add it as an alias for convenience.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While b259f09 made git-push output a better error message for 'git-push
--all --tags', this commit fixes the synopsis in the documentation.
Inconsistency spotted and fix suggested by Jari Aalto through
http://bugs.debian.org/502567
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This tries to make the description of ref matching in git push easier
to read. Beauty is in the eye of the beholder, though.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Include examples of using HEAD. The order of examples
introduces new concepts one by one. This pushes the
example of deleting a ref to the end of the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refspec format description was a mix of regexp and BNF, making it
very difficult to read. The format was also wrong: it did not show
that each part of a refspec is optional in different situations.
Rather than having a confusing grammar, just present the format in
informal prose.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The <ref> parameter has not been introduced, so rewrite to
avoid it.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "matching refs" semantics works only on matching branches these days.
Instead of using "heads" which traditionally has been used more or less
interchangeably with "refs", say "branch" explicitly here.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment in parentheses is wrong, as one has to leave out both the
colon and <dst>. This situation is covered by the section a few lines
down:
A parameter <ref> without a colon pushes the <ref> from the source
repository to the destination repository under the same name.
So, just remove the parentheses.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is copied from pull-fetch-param.txt and helps the reader
to not get stuck in the URL section.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.
Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
asciidoc markup fixes
Fail properly when cloning from invalid HTTP URL
Conflicts:
Documentation/git-push.txt
|
|
I see quite a few pages on k.org site, e.g.
http://www.kernel.org/pub/software/scm/git/docs/git-rerere.html
(scroll down to find "After this test merge")
are misformatted to lose teletype text '+' that is followed by a comma,
and turns the following paragraph all typeset in teletype.
This patch seems to fix the issue at the site (meaning, with the
particular vintage of asciidoc and docbook toolchain), without breaking
things with the version I have at my primary development machine, but
wider testing is very much appreciated.
After this patch,
git grep '`+`,' -- Documentation
should report noting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option behaves more like:
git push $url +refs/*:refs/*
than it does like:
git push $url +refs/heads/*:refs/heads/* +refs/tags/*:refs/tags/*
so we should document it to be more clear about that.
Suggested-by: Marek Zawirski <marek.zawirski@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pb/push:
add special "matching refs" refspec
|
|
* pb/remote-mirror-config:
Add a remote.*.mirror configuration option
|
|
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These paragraphs are a little confusing. Also, make it clearer when
you have to specify the full name for <dst>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output was meant to be a balance of self-explanatory and
terse. In case we have erred too far on the terse side, it
doesn't hurt to explain in more detail what each line means.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Tay Ray Chuan
Stephen Boyd
Jeff King
Thomas Rast
Ilari Liusvaara
Jan Krüger
Felipe Contreras
Nelson Elhage
Matthieu Moy
Larry D'Anna
Chris Johnsen
Marc Branchaud
Gerrit Pape
Anders Melchiorsen
jidanni@jidanni.org
Johannes Sixt
Abhijit Menon-Sen
Jonathan Nieder
Shawn O. Pearce
Stephan Beyer
Christian Couder
Paolo Bonzini
Sam Vilain