summaryrefslogtreecommitdiff
path: root/Documentation/git-prune.txt
AgeCommit message (Collapse)AuthorFilesLines
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-8/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-08-09prune: allow --dry-run for -n and --verbose for -vLibravatar René Scharfe1-0/+2
For consistency with other git commands, let git prune accept the long options --dry-run and --verbose for the respective short ones -n and -v. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17docs: don't talk about $GIT_DIR/refs/ everywhereLibravatar Jeff King1-1/+1
It is misleading to say that we pull refs from $GIT_DIR/refs/*, because we may also consult the packed refs mechanism. These days we tend to treat the "refs hierarchy" as more of an abstract namespace that happens to be represented as $GIT_DIR/refs. At best, this is a minor inaccuracy, but at worst it can confuse users who then look in $GIT_DIR/refs and find that it is missing some of the refs they expected to see. This patch drops most uses of "$GIT_DIR/refs/*", changing them into just "refs/*", under the assumption that users can handle the concept of an abstract refs namespace. There are a few things to note: - most cases just dropped the $GIT_DIR/ portion. But for cases where that left _just_ the word "refs", I changed it to "refs/" to help indicate that it was a hierarchy. I didn't do the same for longer paths (e.g., "refs/heads" remained, instead of becoming "refs/heads/"). - in some cases, no change was made, as the text was explicitly about unpacked refs (e.g., the discussion in git-pack-refs). - In some cases it made sense instead to note the existence of packed refs (e.g., in check-ref-format and rev-parse). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-8/+8
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2008-09-30make prune report removed objects on -vLibravatar Michael J Gruber1-1/+4
This adds an option "-v" which makes "git prune" more verbose: It outputs all removed objects while removing them. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-7/+7
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-5/+5
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-2/+2
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-1/+1
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-15Documentation/git-prune.txt: document unpacked logicLibravatar Chris Frey1-1/+4
Clarifies the git-prune man page, documenting that it only prunes unpacked objects. Signed-off-by: Chris Frey <cdfrey@foursquare.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-29Documentation: point git-prune users to git-gcLibravatar Jeff King1-0/+20
Most users should be using git-gc instead of directly calling prune. For those who really do want more information on pruning, let's point them at git-fsck, which goes into slightly more detail on reachability. And since we're pointing users there, let's make sure reflogs are mentioned in git-fsck(1). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-30Add "--expire <time>" option to 'git prune'Libravatar Johannes Schindelin1-1/+4
Earlier, 'git prune' would prune all loose unreachable objects. This could be quite dangerous, as the objects could be used in an ongoing operation. This patch adds a mode to expire only loose, unreachable objects which are older than a certain time. For example, by git prune --expire 14.days you can prune only those objects which are loose, unreachable and older than 14 days (and thus probably outdated). The implementation uses st.st_mtime rather than st.st_ctime, because it can be tested better, using 'touch -d <time>' (and omitting the test when the platform does not support that command line switch). Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-09Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: Make command description imperative statement, not third-person present.
2007-06-09Make command description imperative statement, not third-person present.Libravatar william pursell1-1/+1
In several of the text messages, the tense of the verb is inconsistent. For example, "Add" vs "Creates". It is customary to use imperative for command description. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-28git-fsck-objects is now synonym to git-fsckLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-21Revert "prune: --grace=time"Libravatar Junio C Hamano1-8/+1
This reverts commit 9b088c4e394df84232cfd37aea78349a495b09c1. Protecting 'mature' objects does not make it any safer. We should admit that git-prune is inherently unsafe when run in parallel with other operations without involving unwarranted locking overhead, and with the latest git, even rebase and reset would not immediately create crufts anyway.
2007-01-20prune: --grace=timeLibravatar Matthias Lederhofer1-1/+8
This option gives grace period to objects that are unreachable from the refs from getting pruned. The default value is 24 hours and may be changed using gc.prunegrace. Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05Fix up docs where "--" isn't displayed correctly.Libravatar sean1-1/+1
A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-08git-prune: never lose objects reachable from our refs.Libravatar Junio C Hamano1-18/+9
Explicit <head> arguments to git-prune replaces, instead of extends, the list of heads used for reachability analysis by fsck-objects. By giving a subset of heads by mistake, objects reachable only from other heads can be removed, resulting in a corrupted repository. This commit stops replacing the list of heads, and makes the command line arguments to add to them instead for safety. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-08Documentation: git-pruneLibravatar Junio C Hamano1-1/+29
Not replacing but always including our own refs may be more desirable (and unarguably much safer), but at the same time I have a suspicion that that might be forbidding a useful usage I haven't thought of, so... Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-0/+43
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>