summaryrefslogtreecommitdiff
path: root/Documentation/git-p4.txt
AgeCommit message (Collapse)AuthorFilesLines
2016-07-13Merge branch 'mm/doc-tt'Libravatar Junio C Hamano1-11/+11
More mark-up updates to typeset strings that are expected to literally typed by the end user in fixed-width font. * mm/doc-tt: doc: typeset HEAD and variants as literal CodingGuidelines: formatting HEAD in documentation doc: typeset long options with argument as literal doc: typeset '--' as literal doc: typeset long command-line options as literal doc: typeset short command-line options as literal Documentation/git-mv.txt: fix whitespace indentation
2016-06-28doc: typeset HEAD and variants as literalLibravatar Matthieu Moy1-1/+1
This is an application of the newly added CodingGuidelines to HEAD and variants like FETCH_HEAD. It was obtained with: perl -pi -e "s/'([A-Z_]*HEAD)'/\`\$1\`/g" *.txt Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-28doc: typeset long command-line options as literalLibravatar Matthieu Moy1-10/+10
Similarly to the previous commit, use backquotes instead of forward-quotes, for long options. This was obtained with: perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt and manual tweak to remove false positive in ascii-art (o'--o'--o' to describe rewritten history). Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-27Merge branch 'tr/doc-tt'Libravatar Junio C Hamano1-2/+2
The documentation set has been updated so that literal commands, configuration variables and environment variables are consistently typeset in fixed-width font and bold in manpages. * tr/doc-tt: doc: change configuration variables format doc: more consistency in environment variables format doc: change environment variables format doc: clearer rule about formatting literals
2016-06-08doc: more consistency in environment variables formatLibravatar Tom Russello1-1/+1
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped (italic type) environment variables which are followed by the word "environment". It was obtained with: perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt One of the main purposes is to stick to the CodingGuidelines as possible so that people writting new documentation by mimicking the existing are more likely to have it right (even if they didn't read the CodingGuidelines). Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org> Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-08doc: change environment variables formatLibravatar Tom Russello1-1/+1
This change GIT_* variables that where in italic style to monospaced font according to the guideline. It was obtained with perl -pi -e "s/\'(GIT_.*?)\'/\`\1\`/g" *.txt One of the main purposes is to stick to the CodingGuidelines as possible so that people writting new documentation by mimicking the existing are more likely to have it right (even if they didn't read the CodingGuidelines). Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org> Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org> Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-04-06Merge branch 'ls/p4-map-user'Libravatar Junio C Hamano1-0/+11
"git p4" now allows P4 author names to be mapped to Git author names. * ls/p4-map-user: git-p4: map a P4 user to Git author name and email address
2016-03-23Documentation: fix git-p4 AsciiDoc formattingLibravatar Lars Schneider1-5/+3
Noticed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-21Documentation: use ASCII quotation marks in git-p4Libravatar Lars Schneider1-1/+1
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-15git-p4: map a P4 user to Git author name and email addressLibravatar Lars Schneider1-0/+11
Map a P4 user to a specific name and email address in Git with the "git-p4.mapUser" config. The config value must be a string adhering to the format "p4user = First Lastname <email@address.com>". Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Reviewed-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-15Merge branch 'ls/p4-keep-empty-commits'Libravatar Junio C Hamano1-0/+4
"git p4" used to import Perforce CLs that touch only paths outside the client spec as empty commits. It has been corrected to ignore them instead, with a new configuration git-p4.keepEmptyCommits as a backward compatibility knob. * ls/p4-keep-empty-commits: git-p4: add option to keep empty commits
2015-12-10git-p4: add option to keep empty commitsLibravatar Lars Schneider1-0/+4
A changelist that contains only excluded files due to a client spec was imported as an empty commit. Fix that issue by ignoring these commits. Add option "git-p4.keepEmptyCommits" to make the previous behavior available. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Helped-by: Pete Harlan Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-15Merge branch 'ls/p4-lfs'Libravatar Junio C Hamano1-0/+32
Teach "git p4" to send large blobs outside the repository by talking to Git LFS. * ls/p4-lfs: git-p4: add Git LFS backend for large file system git-p4: add support for large file systems git-p4: check free space during streaming git-p4: add file streaming progress in verbose mode git-p4: return an empty list if a list config has no values git-p4: add gitConfigInt reader git-p4: add optional type specifier to gitConfig reader
2015-10-03git-p4: add support for large file systemsLibravatar Lars Schneider1-0/+32
Perforce repositories can contain large (binary) files. Migrating these repositories to Git generates very large local clones. External storage systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4] try to address this problem. Add a generic mechanism to detect large files based on extension, uncompressed size, and/or compressed size. [1] https://git-lfs.github.com/ [2] https://github.com/jedbrown/git-fat [3] https://github.com/alebedev/git-media [4] https://git-annex.branchable.com/ Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Conflicts: Documentation/git-p4.txt git-p4.py Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-03git-p4: add config git-p4.pathEncodingLibravatar Lars Schneider1-0/+7
Perforce keeps the encoding of a path as given by the originating OS. Git expects paths encoded as UTF-8. Add a config to tell git-p4 what encoding Perforce had used for the paths. This encoding is used to transcode the paths to UTF-8. As an example, Perforce on Windows often uses “cp1252” to encode path names. Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-04-20git-p4: use -m when running p4 changesLibravatar Lex Spoon1-3/+14
Simply running "p4 changes" on a large branch can result in a "too many rows scanned" error from the Perforce server. It is better to use a sequence of smaller calls to "p4 changes", using the "-m" option to limit the size of each call. Signed-off-by: Lex Spoon <lex@lexspoon.org> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-02-11git-p4: support excluding paths on syncLibravatar Luke Diamand1-3/+3
The clone subcommand has long had support for excluding subdirectories, but sync has not. This is a nuisance, since as soon as you do a sync, any changed files that were initially excluded start showing up. Move the "exclude" command-line option into the parent class; the actual behavior was already present there so it simply had to be exposed. Signed-off-by: Luke Diamand <luke@diamand.org> Reviewed-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-22git p4 doc: use two-line style for options with multiple spellingsLibravatar Pete Wyckoff1-2/+4
Thomas Rast noticed the docs have a mix of styles when it comes to options with multiple spellings. Standardize the couple in git-p4.txt that are odd. Instead of: -n, --dry-run:: Do this: -n:: --dry-run:: See http://thread.gmane.org/gmane.comp.version-control.git/219936/focus=219945 Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-03Change "remote tracking" to "remote-tracking"Libravatar Michael Schubert1-7/+10
Fix a typo ("remote remote-tracking") going back to the big cleanup in 2010 (8b3f3f84 etc). Also, remove some more occurrences of "tracking" and "remote tracking" in favor of "remote-tracking". Signed-off-by: Michael Schubert <mschub@elegosoft.com> Reviewed-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-05Merge branch 'ta/doc-no-small-caps'Libravatar Junio C Hamano1-42/+42
Update documentation to change "GIT" which was a poor-man's small caps to "Git". The latter was the intended spelling. Also change "git" spelled in all-lowercase to "Git" when it refers to the system as the whole or the concept it embodies, as opposed to the command the end users would type. * ta/doc-no-small-caps: Documentation: StGit is the right spelling, not StGIT Documentation: describe the "repository" in repository-layout Documentation: add a description for 'gitfile' to glossary Documentation: do not use undefined terms git-dir and git-file Documentation: the name of the system is 'Git', not 'git' Documentation: avoid poor-man's small caps GIT
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-42/+42
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: fix submit when no master branchLibravatar Pete Wyckoff1-0/+5
It finds its upstream and applies the commit properly, but the sync step will fail unless it is told which branch to work on. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: fix sync --branch when no master branchLibravatar Pete Wyckoff1-0/+5
It is legal to sync a branch with a different name than refs/remotes/p4/master, and to do so even when master does not exist. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: allow short ref names to --branchLibravatar Pete Wyckoff1-2/+5
For a clone or sync, --branch says where the newly imported branch should go, or which existing branch to sync up. It takes an argument, which is currently either something that starts with "refs/", or if not, "refs/heads/p4" is prepended. Putting it in heads seems like a bad default; these should go in remotes/p4/ in most situations. Make that the new default, and be more liberal in the form of the branch name. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4 doc: fix branch detection exampleLibravatar Pete Wyckoff1-1/+3
Make sure that the example on how to use git-p4.branchList works if typed directly. In particular, it does not make sense to set a config variable until the git repository has been initialized. Reported-by: Olivier Delalleau <shish@keba.be> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-15git p4: clone --branch should checkout masterLibravatar Pete Wyckoff1-2/+1
When using the --branch argument to "git p4 clone", one might specify a destination for p4 changes different from the default refs/remotes/p4/master. Both cases should create a master branch and checkout files. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-16git-p4: add submit --conflict option and config varaiableLibravatar Pete Wyckoff1-0/+11
This allows specifying what to do when a conflict happens when applying a commit to p4, automating the interactive prompt. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-16git p4: add submit --prepare-p4-only optionLibravatar Pete Wyckoff1-0/+7
This option can be used to prepare the client workspace for submission, only. It does not invoke the final "p4 submit". A message describes how to proceed, either submitting the changes or reverting. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-16git p4: add submit --dry-run optionLibravatar Pete Wyckoff1-0/+4
A new option, "git p4 submit --dry-run" can be used to verify what commits and labels would be moved into p4. Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-16git p4: accept -v for --verboseLibravatar Pete Wyckoff1-1/+1
The short form "-v" is common in many git commands as an alias for "--verbose". Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-05git p4: refactor diffOpts calculationLibravatar Gary Gibbons1-4/+6
P4Submit.applyCommit() To avoid recalculating the same diffOpts for each commit, move it out of applyCommit() and into the top-level run(). Also fix a bug in that code which interpreted the value of detectRenames as a string rather than as a boolean. [pw: fix documentation, rearrange code a bit] Signed-off-by: Gary Gibbons <ggibbons@perforce.com> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-07Sync with maintLibravatar Junio C Hamano1-2/+3
2012-05-07git p4 doc: fix formattingLibravatar Pete Wyckoff1-1/+3
Attach example sections to previous level of indenting. Fix a trailing :: Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-24git p4: move verbose to base classLibravatar Luke Diamand1-7/+4
The verbose flag is common to all classes, or at least should be. Make it a member of the base Command class, rather than reimplementing for each class. Make option parsing mirror this. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-24git p4: fix-up "import/export of labels to/from p4"Libravatar Luke Diamand1-10/+10
The previous one is already in 'next' but was somewhat lacking. The configuration "git-p4.validLabelRegexp" is now called "labelExportRegexp", and its default covers lowercase alphabets as well. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-11git p4: import/export of labels to/from p4Libravatar Luke Diamand1-5/+38
The existing label import code looks at each commit being imported, and then checks for labels at that commit. This doesn't work in the real world though because it will drop labels applied on changelists that have already been imported, a common pattern. This change adds a new --import-labels option. With this option, at the end of the sync, git p4 gets sets of labels in p4 and git, and then creates a git tag for each missing p4 label. This means that tags created on older changelists are still imported. Tags that could not be imported are added to an ignore list. The same sets of git and p4 tags and labels can also be used to derive a list of git tags to export to p4. This is enabled with --export-labels in 'git p4 submit'. Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-09git-p4: move to toplevelLibravatar Pete Wyckoff1-13/+6
Move git-p4 out of contrib/fast-import into the main code base, aside other foreign SCM tools. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-26Merge branch 'maint'Libravatar Junio C Hamano1-3/+7
* maint: Document accumulated fixes since 1.7.9.2 Git 1.7.8.5 grep -P: Fix matching ^ and $ am: don't infloop for an empty input file rebase -m: only call "notes copy" when rewritten exists and is non-empty git-p4: remove bash-ism in t9800 git-p4: remove bash-ism in t9809 git-p4: fix submit regression with clientSpec and subdir clone git-p4: set useClientSpec variable on initial clone Makefile: add thread-utils.h to LIB_H Conflicts: RelNotes t/t9809-git-p4-client-view.sh
2012-02-26git-p4: set useClientSpec variable on initial cloneLibravatar Pete Wyckoff1-3/+7
If --use-client-spec was given, set the matching configuration variable. This is necessary to ensure that future submits work properly. The alternatives of requiring the user to set it, or providing a command-line option on every submit, are error prone. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-23git-p4: add initial support for RCS keywordsLibravatar Luke Diamand1-0/+5
RCS keywords cause problems for git-p4 as perforce always expands them (if +k is set) and so when applying the patch, git reports that the files have been modified by both sides, when in fact they haven't. This change means that when git-p4 detects a problem applying a patch, it will check to see if keyword expansion could be the culprit. If it is, it strips the keywords in the p4 repository so that they match what git is expecting. It then has another go at applying the patch. This behaviour is enabled with a new git-p4 configuration option and is off by default. Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-11git-p4: add tests demonstrating spec overlay ambiguitiesLibravatar Pete Wyckoff1-0/+5
Introduce new tests that look more closely at overlay situations when there are conflicting files. Five of these are broken. Document the brokenness. This is a fundamental problem with how git-p4 only "borrows" a client spec. At some sync operation, a new change can contain a file which is already in the repo or explicitly deleted through another mapping. To sort this out would involve listing all the files in the client spec to find one with a higher priority. While this is not too hard for the initial import, subsequent sync operations would be very costly. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-03git-p4: view spec documentationLibravatar Pete Wyckoff1-13/+27
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: document and test submit optionsLibravatar Pete Wyckoff1-2/+6
Clarify there is a -M option, but no -C. These are both configurable through variables. Explain that the allowSubmit variable takes a comma-separated list of branch names. Catch earlier an invalid branch name given as an argument to "git p4 clone". Test option --origin, variable allowSubmit, and explicit master branch name. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: test and document --use-client-specLibravatar Pete Wyckoff1-1/+4
The depot path is required, even with this option. Make sure git-p4 fails and exits with non-zero. Contents in the specified depot path will be rearranged according to the client spec. Test this and add a note in the docs. Leave an XXX suggesting that this is somewhat confusing behavior that might be good to fix later. Function stripRepoPath() looks at self.useClientSpec. Make sure this is set both for command-line option --use-client-spec and for configuration variable git-p4.useClientSpec. Test this. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: document and test --import-localLibravatar Pete Wyckoff1-1/+3
Explain that it is needed on future syncs to find p4 branches in refs/heads. Test this behavior. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: document and test clone --branchLibravatar Pete Wyckoff1-1/+9
Clone with --branch will not checkout HEAD, unless the branch happens to be called the default refs/remotes/p4/master. The --branch option is most useful with sync; give an example of that. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: test cloning with two dirs, clarify docLibravatar Pete Wyckoff1-2/+9
Document how git-p4 currently works when specifying multiple depot paths: 1. No branches or directories are named. 2. Conflicting files are silently ignored---the last change wins. 2. Option --destination is required, else the last path is construed to be a directory. 3. Revision specifiers must be the same on all paths for them to take effect. Test this behavior. Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-27git-p4: introduce asciidoc documentationLibravatar Pete Wyckoff1-0/+455
Add proper documentation for git-p4. Delete the old .txt documentation from contrib/fast-import. Cc: Frans Klaver <fransklaver@gmail.com> Cc: Luke Diamand <luke@diamand.org> Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>