| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* mm/merge-in-dirty-worktree-doc:
Documentation/git-merge.txt: weaken warning about uncommited changes
|
|
Commit 35d2fffd introduced 'git merge --abort' as a synonym to 'git reset
--merge', and added some failing tests in t7611-merge-abort.sh (search
'###' in this file) showing that 'git merge --abort' could not always
recover the pre-merge state.
Still, in many cases, 'git merge --abort' just works, and it is usually
considered that the ability to start a merge with uncommited changes is
an important property of Git.
Weaken the warning by discouraging only merge with /non-trivial/
uncommited changes.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document the 1.7.9 feature to merge a signed tag and keep that in
the mergetag header in the resulting commit better.
* yd/doc-merge-annotated-tag:
Documentation: merging a tag is a special case
|
|
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change was already done by 0e615b252f3 (Matthieu Moy, Tue Nov 2
2010, Replace "remote tracking" with "remote-tracking"), but new
instances of remote tracking (without dash) were introduced in the
meantime.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jeff King <peff@peff.net>
|
|
- (glossary) the quotes around the Wikipedia URL prevented its
linkification in frontends that support it; remove them
- (manual) newer version (SHA-1) == following, older == preceding, not
the other way around
- trivial typo and wording fixes
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/merge-sans-branch:
merge: merge with the default upstream branch without argument
merge: match the help text with the documentation
Conflicts:
builtin/merge.c
|
|
"git merge" without specifying any commit is a no-op by default.
A new option merge.defaultupstream can be set to true to cause such an
invocation of the command to merge the upstream branches configured for
the current branch by using their last observed values stored in their
remote tracking branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
|
|
Teach 'git merge' the --abort option, which verifies the existence of
MERGE_HEAD and then invokes 'git reset --merge' to abort the current
in-progress merge and attempt to reconstruct the pre-merge state.
The reason for adding this option is to provide a user interface for
aborting an in-progress merge that is consistent with the interface
for aborting a rebase ('git rebase --abort'), aborting the application
of a patch series ('git am --abort'), and aborting an in-progress notes
merge ('git notes merge --abort').
The patch includes documentation and testcases that explain and verify
the various scenarios in which 'git merge --abort' can run. The
testcases also document the cases in which 'git merge --abort' is
unable to correctly restore the pre-merge state (look for the '###'
comments towards the bottom of t/t7609-merge-abort.sh).
This patch has been improved by the following contributions:
- Jonathan Nieder: Move test documentation into test_description
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inside an element of an enumerated list, the second and subsequent
paragraphs need to lose their indent and have to be strung together with a
line with a single '+' on it instead. Otherwise the lines below are shown
in typewriter face, which just looks wrong.
Signed-off-by: Nathan W. Panike <nathan.panike@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user specifies a message, use fmt_merge_msg_shortlog() to
append the shortlog.
Previously, when a message was specified, we ignored the merge title
("Merge <foo> into <bar>") and shortlog from fmt_merge_msg().
Update the documentation for -m to reflect this too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also move -X's description next to -s's in merge-options.txt.
This makes it easier to learn how to specify merge strategy options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'doc-style/for-next' of git://repo.or.cz/git/trast:
Documentation: merge: use MERGE_HEAD to refer to the remote branch
Documentation: simplify How Merge Works
Documentation: merge: add a section about fast-forward
Documentation: emphasize when git merge terminates early
Documentation: merge: add an overview
Documentation: merge: move merge strategy list to end
Documentation: suggest `reset --merge` in How Merge Works section
Documentation: merge: move configuration section to end
Documentation: emphasise 'git shortlog' in its synopsis
Documentation: show-files is now called git-ls-files
Documentation: tiny git config manual tweaks
Documentation: git gc packs refs by default now
Conflicts:
Documentation/config.txt
|
|
commit 57bddb11 (Documentation/git-merge: reword references to
"remote" and "pull", 2010-01-07) fixed the manual to drop the
assumption that the other branch being merged is from a remote
repository. Unfortunately, in a few places, to do so it
introduced the antecedentless phrase "their versions". Worse, in
passages like the following, 'they' is playing two roles.
| highlighting changes from both the HEAD and their versions.
|
| * Look at the diffs on their own. 'git log --merge -p <path>'
Using HEAD and MERGE_HEAD nicely assigns terminology to "our" and
"their" sides. It also provides the reader with practice using
names that git will recognize on the command line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
The user most likely does not care about the exact order of
operations because he cannot see it happening anyway. Instead,
try to explain what it means to merge two commits into a single
tree.
While at it:
- Change the heading to TRUE MERGE. The entire manual page is
about how merges work.
- Document MERGE_HEAD. It is a useful feature, since it makes
the parents of the intended merge commit easier to refer to.
- Do not assume commits named on the 'git merge' command line come
from another repository. For simplicity, the discussion of
conflicts still does assume that there is only one and it is a
branch head.
- Do not start list items with `code`. Otherwise, a toolchain bug
produces a line break in the generated nroff, resulting in odd
extra space.
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Novices sometimes find the behavior of 'git merge' in the
fast-forward case surprising. Describe it thoroughly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
A merge-based operation in git can fail in two ways: one that
stops before touching anything, or one that goes ahead and
results in conflicts.
As the 'git merge' manual explains:
| A merge is always between the current `HEAD` and one or more
| commits (usually, branch head or tag), and the index file must
| match the tree of `HEAD` commit (i.e. the contents of the last commit)
| when it starts out.
Unfortunately, the placement of this sentence makes it easy to
skip over, and its formulation leaves the important point, that
any other attempted merge will be gracefully aborted, unspoken.
So give this point its own section and expand upon it.
Probably this could be simplified somewhat: after all, a change
registered in the index is just a special kind of local
uncommited change, so the second added paragraph is only a
special case of the first. It seemed more helpful to be explicit
here.
Inspired by <http://gitster.livejournal.com/25801.html>.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
The reader unfamiliar with the concepts of branching and merging
would have been completely lost. Try to help him with a diagram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
So the section layout changes as follows:
NAME
SYNOPSIS
DESCRIPTION
OPTIONS
-MERGE STRATEGIES
HOW MERGE WORKS
HOW CONFLICTS ARE PRESENTED
HOW TO RESOLVE CONFLICTS
EXAMPLES
+MERGE STRATEGIES
CONFIGURATION
SEE ALSO
AUTHOR
DOCUMENTATION
GIT
NOTES
The first-time user will care more about conflicts than about
strategies other than 'recursive'.
One of the examples uses -s ours, but I do not think this hinders
readability.
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
The 'merge' manual suggests 'reset' to cancel a merge at the end
of the Merge Strategies list. It is more logical to explain this
right before explaining how merge conflicts work, so the daunted
reader can have a way out when he or she needs it most.
While at it, make the advice more dependable and self-contained
by providing the --merge option.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Configuration and environment variables belong to the back matter
of a manual page.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
We do this for both git-merge and git-pull, so as to hopefully alert
(over)users of git-pull to the issue.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
The git-merge manpage was written in terms of merging a "remote",
which is no longer the case: you merge local or remote-tracking
branches; pull is for actual remotes.
Adjust the manpage accordingly. We refer to the arguments as
"commits", and change instances of "remote" to "other" (where branches
are concerned) or "theirs" (where conflict sides are concerned).
Remove the single reference to "pulling".
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
|
|
Introduce a command line option to override rerere.autoupdate configuration
variable to make it more useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git pull" documentation has examples which follow an outdated
style. Update the examples to use "git merge" where appropriate and
move the examples to the corresponding manpages.
Furthermore,
- show that pull is equivalent to fetch and merge, which is still a
frequently asked question,
- explain the default fetch refspec.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As spotted by the eagle eyes of Jeff King.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve some minor language and format issues like hyphenation,
phrases, spacing, word order, comma, attributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
|
|
In the section on conflict markers, the "<<<<<<<" sequence is compiled by
AsciiDoc into invalid XML. A way to resolve this is by inserting something
between the last two characters in that sequence (i.e. between '<' and '"').
This patch encloses the conflict markers in backticks, which renders them
in a monospace font (in the HTML version; the manual page is unaffected),
and with the pleasant side-effect that it also fixes the AsciiDoc compile
problem.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We took it granted that everybody knows how to read the RCS merge style
conflicts, and did not give illustrations in the documentation. Now we
are introducing an alternative output style, it is time to document this.
The lack of illustration has been bugging me for a long time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Dan Hensgen <dan@methodhead.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old cox.net address is still getting mails from gitters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-merge documentation's "HOW MERGE WORKS" section is confusingly
composed and actually omits the most interesting part, the merging of
the arguments into HEAD itself, surprisingly not actually mentioning
the fast-forward merge anywhere.
This patch replaces the "[NOTE]" screenful of highly technical details
by a single sentence summing up the interesting information, and instead
explains how are the arguments compared with HEAD and the three possible
inclusion states that are named "Already up-to-date", "Fast-forward"
and "True merge". It also makes it clear that the rest of the section
talks only about the true merge situation, and slightly expands the
talk on solving conflicts.
Junio initiated the removal of the Note screenful altogether and
offered many stylistical fixes.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Merge has always set ORIG_HEAD but never mentioned it, while we
recently added it to am and rebase. These facts should be reflected
in the documentation.
git-reset also sets ORIG_HEAD, but that fact is already mentioned in
the very first example so no changes were needed there.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Matthieu Moy
Felipe Contreras
Thomas Ackermann
Štěpán Němec
Jeff King
Johan Herland
Nathan W. Panike
Tay Ray Chuan
Marc Branchaud
Jonathan Nieder
Thomas Rast
Clemens Buchacher
Paul Bolle
Wincent Colaiuta
Chris Johnsen
Ralf Wildenhues
Shawn O. Pearce
Dan Hensgen
Abhijit Menon-Sen
Petr Baudis
Brian Gernhardt
Jonathan Nieder