summaryrefslogtreecommitdiff
path: root/Documentation/git-merge-file.txt
AgeCommit message (Collapse)AuthorFilesLines
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-11/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-03-02merge-file: add option to select union merge favorLibravatar Bert Wesarg1-6/+7
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02merge-file: add option to specify the marker sizeLibravatar Bert Wesarg1-2/+3
This adds the abbility to specify the conflict marker size for merges outside a git repository. Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'ap/merge-backend-opts'Libravatar Junio C Hamano1-2/+10
* ap/merge-backend-opts: Document that merge strategies can now take their own options Extend merge-subtree tests to test -Xsubtree=dir. Make "subtree" part more orthogonal to the rest of merge-recursive. pull: Fix parsing of -X<option> Teach git-pull to pass -X<option> to git-merge git merge -X<option> git-merge-file --ours, --theirs Conflicts: git-compat-util.h
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-5/+5
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-11-29git-merge-file --ours, --theirsLibravatar Junio C Hamano1-2/+10
Sometimes people want their conflicting merges autoresolved by favouring upstream changes. The standard answer they are given is to run "git diff --name-only | xargs git checkout MERGE_HEAD --" in such a case. This is to accept automerge results for the paths that are fully resolved automatically, while taking their version of the file in full for paths that have conflicts. This is problematic on two counts. One is that this is not exactly what these people want. It discards all changes they did on their branch for any paths that conflicted. They usually want to salvage as much automerge result as possible in a conflicted file, and want to take the upstream change only in the conflicted part. This patch teaches two new modes of operation to the lowest-lever merge machinery, xdl_merge(). Instead of leaving the conflicted lines from both sides enclosed in <<<, ===, and >>> markers, the conflicts are resolved favouring our side or their side of changes. A larger problem is that this tends to encourage a bad workflow by allowing people to record such a mixed up half-merged result as a full commit without auditing. This commit does not tackle this issue at all. In git, we usually give long enough rope to users with strange wishes as long as the risky features are not enabled by default, and this is such a risky feature. Signed-off-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-09Improve language in git-merge.txt and related docsLibravatar Ralf Wildenhues1-6/+6
Improve some minor language and format issues like hyphenation, phrases, spacing, word order, comma, attributes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize nongit command names (if they are in teletype font)Libravatar Jonathan Nieder1-2/+2
Some manual pages use teletype font to set command names. We change them to use italics, instead. This creates a visual distinction between names of commands and command lines that can be typed at the command line. It is also more consistent with other man pages outside Git. In this patch, the commands named are non-git commands like bash. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-5/+5
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize command namesLibravatar Jonathan Nieder1-1/+1
This includes nongit commands like RCS 'merge'. This patch only italicizes names of commands if they had no formatting before. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-5/+5
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-2/+2
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-17Fix mis-mark-up in git-merge-file.txt documentationLibravatar Junio C Hamano1-2/+2
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-16Document git-merge-fileLibravatar Johannes Schindelin1-0/+92
Most of this is derived from the documentation of RCS merge. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>