summaryrefslogtreecommitdiff
path: root/Documentation/git-ls-tree.txt
AgeCommit message (Collapse)AuthorFilesLines
2009-05-10ls-tree manpage: use "unless" instead of "when ... is not"Libravatar Alex Riesen1-1/+1
Delayed negation in a statement is harder to spot and keep in mind. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-28ls-tree documentation: enhance notes on subdirectory and pathspec behaviourLibravatar Junio C Hamano1-4/+14
When run in a working copy subdirectory, git-ls-tree will automagically add the prefix to the pathspec, which can result in an unexpected behavior when the tree object accessed is not the root tree object. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-20Add an option to git-ls-tree to display also the size of blobLibravatar Jakub Narebski1-1/+13
Add -l/--long option to git-ls-tree command, which displays object size of a blob entry. Object size is placed after object id (left-justified with minimum width of 7 characters). For non-blob entries `-' is used. Rationale: for non-blob entries size of an object has no much meaning, and is not very interesting. Moreover, in planned pack v4 tree objects would be constructed on demand, so tree size would need to be calculated. Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07Documentation: git-ls-tree (typofix)Libravatar Junio C Hamano1-1/+1
spotted by jdl. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07Document git-ls-tree --fullnameLibravatar Jonas Fonseca1-4/+7
Additionally, reformat synopsis and remove stub notice. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-17ls-tree: add --abbrev[=<n>] optionLibravatar Eric Wong1-1/+8
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-04Update the git-ls-tree documentationLibravatar Petr Baudis1-14/+29
This patch aims to freshen up a bit the git-ls-tree documentation. It hints that the list of paths are in fact patterns to be matched, explains the new -t, --name-only and --name-status options, corrects the original autorship information to refer to yours sincerely, corrects several grammar mistakes, etc. Since the documentation still deserves some significant work (at least proper description of the pattern matching), I also added the stub notice. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-17Update documentation for C-style quoting.Libravatar Junio C Hamano1-0/+4
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05[PATCH] Assorted documentation patchesLibravatar Johannes Schindelin1-2/+2
[jc: Johannes spent time and effort to see how consistent our use of terminilogy is, and as a byproduct made these corrections not related to the terminology unification. I really appreciate it.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-05-29[PATCH] Rewrite ls-tree to behave more like "/bin/ls -a"Libravatar Junio C Hamano1-8/+12
This is a complete rewrite of ls-tree to make it behave more like what "/bin/ls -a" does in the current working directory. Namely, the changes are: - Unlike the old ls-tree behaviour that used paths arguments to restrict output (not that it worked as intended---as pointed out in the mailing list discussion, it was quite incoherent), this rewrite uses paths arguments to specify what to show. - Without arguments, it implicitly uses the root level as its sole argument ("/bin/ls -a" behaves as if "." is given without argument). - Without -r (recursive) flag, it shows the named blob (either file or symlink), or the named tree and its immediate children. - With -r flag, it shows the named path, and recursively descends into it if it is a tree. - With -d flag, it shows the named path and does not show its children even if the path is a tree, nor descends into it recursively. This is still request-for-comments patch. There is no mailing list consensus that this proposed new behaviour is a good one. The patch to t/t3100-ls-tree-restrict.sh illustrates user-visible behaviour changes. Namely: * "git-ls-tree $tree path1 path0" lists path1 first and then path0. It used to use paths as an output restrictor and showed output in cache entry order (i.e. path0 first and then path1) regardless of the order of paths arguments. * "git-ls-tree $tree path2" lists path2 and its immediate children but having explicit paths argument does not imply recursive behaviour anymore, hence paths/baz is shown but not paths/baz/b. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-26[PATCH] ls-tree matching multiple pathsLibravatar Jason McMullan1-1/+6
Enhance git-ls-tree to allow optional 'match paths' that restricts the output of git-ls-tree. This is useful to retrieve a single file's SHA1 out of a tree without creating an index. [JC: I added the test case] Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-10[PATCH 1/4] split core-git.txt and updateLibravatar David Greaves1-0/+46
Split the core-git.txt file Formatting fix to the diff-format.txt Signed-off-by: David Greaves <david@dgreaves.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 20:36:39 +0000