summaryrefslogtreecommitdiff
path: root/Documentation/git-ls-files.txt
AgeCommit message (Collapse)AuthorFilesLines
2009-01-13Fix Documentation typos surrounding the word 'handful'.Libravatar Jon Loeliger1-1/+1
Some instances replaced by "handful of", others use the word "few", a couple get a slight rewording. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-28Documentation: clarify what is shown in "git-ls-files -s" outputLibravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-4/+4
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-10/+20
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-4/+4
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-21Documentation: ls-files -v is about "assume unchanged".Libravatar Junio C Hamano1-1/+2
And refer the reader to update-index documentation. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-15git-ls-files: add --exclude-standardLibravatar Jeff King1-0/+5
This provides a way for scripts to get at the new standard exclude function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-14Document ls-files --with-tree=<tree-ish>Libravatar Junio C Hamano1-1/+8
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-02Create a new manpage for the gitignore format, and reference it elsewhereLibravatar Josh Triplett1-85/+14
Only git-ls-files(1) describes the gitignore format in detail, and it does so with reference to git-ls-files options. Most users don't use the plumbing command git-ls-files directly, and shouldn't have to look in its manpage for information on the gitignore format. Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor out the gitignore documentation into that file, changing it to refer to .gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference gitignore(5) from other relevant manpages and documentation. Remove now-redundant information on exclude patterns from git-ls-files(1), leaving only information on how git-ls-files options specify exclude patterns and what precedence they have. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-26Merge branch 'maint-1.5.1' into maintLibravatar Junio C Hamano1-1/+1
* maint-1.5.1: Fix git-svn to handle svn not reporting the md5sum of a file, and test. More echo "$user_message" fixes. Add tests for the last two fixes. git-commit: use printf '%s\n' instead of echo on user-supplied strings git-am: use printf instead of echo on user-supplied strings Documentation: Add definition of "evil merge" to GIT Glossary Replace the last 'dircache's by 'index' Documentation: Clean up links in GIT Glossary
2007-05-25Replace the last 'dircache's by 'index'Libravatar Jakub Narebski1-1/+1
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-07Fix minor documentation errorsLibravatar Michael Spang1-2/+2
- git-ls-files.txt: typo in description of --ignored - git-clean.txt: s/forceRequire/requireForce/ Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Documentation: sync git.txt command list and manual page titleLibravatar Junio C Hamano1-1/+1
Also reorders a handful entries to make each list sorted alphabetically. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-13Documentation about exclude/ignore filesLibravatar Matthias Lederhofer1-2/+2
Use .git/info/exclude in the example in git-ls-files.txt, instead of .git/ignore, and update the list of commands looking at .git/info/exclude in repository-layout.txt. Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07Documentation: add another example to git-ls-filesLibravatar Junio C Hamano1-2/+14
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-05Fix up docs where "--" isn't displayed correctly.Libravatar sean1-1/+1
A bare "--" doesn't show up in man or html pages correctly as two individual dashes unless backslashed as \-- in the asciidoc source. Note, no backslash is needed inside a literal block. Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-26Merge branch 'master' into nextLibravatar Junio C Hamano1-0/+3
* master: Optionally do not list empty directories in git-ls-files --others Document git-rebase behavior on conflicts. Fix error handling for nonexistent names
2006-03-26Optionally do not list empty directories in git-ls-files --othersLibravatar Petr Baudis1-0/+3
Without the --directory flag, git-ls-files wouldn't ever list directories, producing no output for empty directories, which is good since they cannot be added and they bear no content, even untracked one (if Git ever starts tracking directories on their own, this should obviously change since the content notion will change). With the --directory flag however, git-ls-files would list even empty directories. This may be good in some situations but sometimes you want to prevent that. This patch adds a --no-empty-directory option which makes git-ls-files omit empty directories. Signed-off-by: Petr Baudis <pasky@suse.cz>
2006-03-17ls-files: add --abbrev[=<n>] optionLibravatar Eric Wong1-2/+7
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-21Merge branch 'jc/nostat'Libravatar Junio C Hamano1-1/+6
* jc/nostat: cache_name_compare() compares name and stage, nothing else. "assume unchanged" git: documentation. ls-files: split "show-valid-bit" into a different option. "Assume unchanged" git: --really-refresh fix. ls-files: debugging aid for CE_VALID changes. "Assume unchanged" git: do not set CE_VALID with --refresh "Assume unchanged" git
2006-02-21git-ls-files: Fix, document, and add test for --error-unmatch option.Libravatar Carl Worth1-0/+5
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-13Documentation: git-ls-files asciidocco.Libravatar Junio C Hamano1-1/+1
Noticed by Jon Nelson. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-12"assume unchanged" git: documentation.Libravatar Junio C Hamano1-1/+6
This updates documentation to describe the "assume unchanged" behaviour. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-21Document git-ls-files --directoryLibravatar Petr Baudis1-0/+4
Add the appropriate bit of documentation. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-29Documentation: spell.Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-23ls-files --full-name: usage string and documentation.Libravatar Junio C Hamano1-1/+8
Somehow this option was not mentioned anywhere in the documentation nor the usage string. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-11Change 'cache' to 'index' in the docsLibravatar Lukas_Sandström1-1/+1
This patch makes the documentation refer to the index as index instead of cache, but some references still remain. (e.g. git-update-index.txt) Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-17Update documentation for C-style quoting.Libravatar Junio C Hamano1-1/+5
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-07s/checkout-cache/checkout-index/g for Documentation/git-ls-files.txtLibravatar Kai Ruemmler1-1/+1
This updates last place where checkout-cache gets mentioned wrongly for checkout-index. Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-03[PATCH] Random documentation fixesLibravatar Jonas Fonseca1-9/+11
The fixes focuses on improving the HTML output. Most noteworthy: - Fix the Makefile to also make various *.html files depend on included files. - Consistently use 'NOTE: ...' instead of '[ ... ]' for additional info. - Fix ending '::' for description lists in OPTION section etc. - Fix paragraphs in description lists ending up as preformated text. - Always use listingblocks (preformatted text wrapped in lines with -----) for examples that span empty lines, so they are put in only one HTML block. - Use '1.' instead of '(1)' for numbered lists. - Fix linking to other GIT docs. - git-rev-list.txt: put option descriptions in an OPTION section. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-02[PATCH] Teach git-ls-files about '--' to denote end of options.Libravatar Fredrik Kuivinen1-1/+8
Useful if you have a file whose name starts with a dash. Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20Show modified files in git-ls-filesLibravatar Junio C Hamano1-3/+6
Add -m/--modified to show files that have been modified wrt. the index. [jc: The original came from Brian Gerst on Sep 1st but it only checked if the paths were cache dirty without actually checking the files were modified. I also added the usage string and a new test.] Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-2/+2
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-04[PATCH] Doc: replace read-cache with git-read-tree.Libravatar Paolo 'Blaisorblade' Giarrusso1-2/+2
Replace references to "read-cache" with references to git-read-tree in the documentation. I chose that because reference say "see read-cache about stages", and stages are explained in git-read-tree. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05[PATCH] Assorted documentation patchesLibravatar Johannes Schindelin1-2/+2
[jc: Johannes spent time and effort to see how consistent our use of terminilogy is, and as a byproduct made these corrections not related to the terminology unification. I really appreciate it.] Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-29Documentation and tests: ls-files exclude pattern.Libravatar Junio C Hamano1-13/+14
Update the tests and documentation to match the new "last one determines its fate" semantics. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-25Documentation: describe git-ls-files --exclude patterns.Libravatar Junio C Hamano1-4/+92
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-05-13[PATCH 3/3] Add git-ls-files -k.Libravatar Junio C Hamano1-2/+8
When checkout-cache attempts to check out a non-directory where a directory exists on the work tree, or to check out a file under directory D when path D is a non-directory on the work tree, the attempt fails. Before running checkout-cache, the user can run git-ls-files with the -k (killed) option to get a list of such paths. The tagged output format uses "K" to denote them. This is useful for Porcelain layer to be careful when dealing with the recently corrected behaviour of checkout-cache. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Petr Baudis <pasky@ucw.cz>
2005-05-10[PATCH 3/4] split core-git.txt and updateLibravatar David Greaves1-1/+3
Update git environment variable docs Update first section of command docs (Manipulation commands section) Signed-off-by: David Greaves <david@dgreaves.com>
2005-05-10[PATCH 1/4] split core-git.txt and updateLibravatar David Greaves1-0/+100
Split the core-git.txt file Formatting fix to the diff-format.txt Signed-off-by: David Greaves <david@dgreaves.com>