| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Match the order of the description to the one in which they get applied:
commit limiting
commit ordering
commit formatting
diff options
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are applied after commit ordering and formatting options, in
particular --reverse.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current description gives the impression that "--full-diff" affects
"log -p" only.
Make it clearer that it affects all diff-based output types.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* eb/doc-log-manpage:
Reorganize `git-log' man page to clarify common diff options.
|
|
This will reduce considerably the common confusion where people miss the
`--follow' option, and wonder why `-M'/`-C' is not working.
* Move the diff options include to after the log-specific flags, and add
a "Common diff options" subtitle before them. (These options apply
only when patches are shown, which is not a common use case among
newbies, so having them first is confusing.)
* Move the `--follow' description to the top of the listed options. The
options before that seem less important: `--full-diff' applies only
when patches are shown, `--source' and `--decorate' are less useful
with many common commit specifications.
* Clarify that `--follow' works only for a single path argument.
Signed-off-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/notes-doc:
Documentation/notes: nitpicks
Documentation/notes: clean up description of rewriting configuration
Documentation/notes: simplify treatment of default display refs
Documentation/log: add a CONFIGURATION section
Documentation/notes: simplify treatment of default notes ref
Documentation/notes: add configuration section
Documentation/notes: describe content of notes blobs
Documentation/notes: document format of notes trees
|
|
* by/log-follow:
tests: rename duplicate t4205
Make git log --follow find copies among unmodified files.
Make diffcore_std only can run once before a diff_flush
Add a macro DIFF_QUEUE_CLEAR.
|
|
* sd/log-decorate:
log.decorate: only ignore it under "log --pretty=raw"
script with rev-list instead of log
log --pretty/--oneline: ignore log.decorate
log.decorate: usability fixes
Add `log.decorate' configuration variable.
git_config_maybe_bool()
Conflicts:
builtin/log.c
|
|
Add a configuration section summarizing variables that affect the
log family of commands.
Cc: Thomas Rast <trast@student.ethz.ch>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git log --follow <path>' don't track copies from unmodified
files, and this patch fix it.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration is meant to suppliment --decorate command line option
that can be used as a boolean to turn the feature on, so it is natural
to expect
[log]
decorate
decorate = yes
to work. The original commit would segfault with the first one, and
would not understand the second one.
Once a user has this configuration in ~/.gitconfig, there needs to be a
way to override it from the command line. Add --no-decorate option to
log family and also allow --decorate=no to mean the same thing. Since
we allow setting log.decorate to 'true', the command line also should
accept --decorate=yes and behave accordingly.
New tests in t4202 are designed to exercise the interaction between the
configuration variable and the command line option that overrides it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git log -p -m is used to show one merge entry per parent, with an
appropriate diff; this can be useful when examining histories where
full set of changes introduced by a merged branch is interesting, not
only the conflicts.
This patch properly documents the -m switch, which has so far been
mentioned only as a fairly special diff-tree flag.
It also makes the code show full patch entry only for the first parent
when --first-parent is used. Thus:
git log -p -m --first-parent
will show the history from the "main branch perspective", while also
including full diff of changes introduced by other merged in branches.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* il/rev-glob:
Documentation: improve description of --glob=pattern and friends
rev-parse --branches/--tags/--remotes=pattern
rev-parse --glob
|
|
Since local branch, tags and remote tracking branch namespaces are
most often used, add shortcut notations for globbing those in
manner similar to --glob option.
With this, one can express the "what I have but origin doesn't?"
as:
'git log --branches --not --remotes=origin'
Original-idea-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --glob=<glob-pattern> option to rev-parse and everything that
accepts its options. This option matches all refs that match given
shell glob pattern (complete with some DWIM logic).
Example:
'git log --branches --not --glob=remotes/origin'
To show what you have that origin doesn't.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The need for "--" in the git-log synopsis was previously unclear and
confusing. This patch makes it a little clearer.
Thanks to hyy <yiyihu@gmail.com> for his help.
[sp: Changed -- to \-- per prior commit e1ccf53.]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace the "This manual page describes only the most frequently used options."
text with the list of rev-list options in git-log manpage. (The git-diff-tree
options are already included.)
Move these options to a separate file and include it from both
git-rev-list.txt and git-log.txt.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Credit goes to Avi Kivity for noticing the lack of description in
rev-list manual page.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: with quite a few fixups]
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most notably, "git log --name-status" stopped at top level
directory changes without "-r" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --walk-reflogs logic and the --reverse logic are completely
incompatible with one another. Attempting to use both at the same
time leads to confusing results that sometimes violates the user's
formatting options or ignores the user's request to see the reflog
message and timestamp.
Unfortunately the implementation of both of these features is glued
onto the side of the revision walking machinary in such a way that
they are probably not going to be easy to make them compatible with
each other. Rather than offering the user confusing results we are
better off bailing out with an error message until such a time as
the implementations can be refactored to be compatible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After vainly searching the Documentation for how to follow renames, I
finally broke down and grepped the source. It would appear that Linus
didn't add write and docs for this feature when he wrote it. The
following patch rectifies that, hopefully sparing future users from
resorting to the source code.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Based on description of commit 477f2b41310c4b1040a9e7f72720b9c39d82caf9
"git log --full-diff" adding this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split description of pretty formats into list of pretty options
(--pretty and --encoding) in new file Documentation/pretty-options.txt
and description of formats itself as a separate "PRETTY FORMATS"
section in pretty-formats.txt
While at it correct formatting a bit, to be better laid out in the
resulting manpages: git-rev-list(1), git-show(1), git-log(1) and
git-diff-tree(1). Those manpages now include pretty options in the
same place as it was before, and description of formats just after
all options.
Inspired by the split into two filesdocumentation for merge strategies:
Documentation/merge-options.txt and Documentation/merge-strategies.txt
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Point at where the options not so frequently used are found.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The revision specification syntax (sometimes referred to as
SHA1-expressions) is accepted almost everywhere in Git by
almost every tool. Unfortunately it is only documented in
git-rev-parse.txt, and most users don't know to look there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We say "this shows only the most often used ones"; so instead of
teaching --max-number=<n> form, list -<n> form which is much
easier to type.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Jeff King
Michael J Gruber
Matthieu Moy
Jonathan Nieder
Eli Barzilay
Bo Yang
Petr Baudis
Ilari Liusvaara
Thomas Rast
Lars Hjemli
Nanako Shiraishi
martin f. krafft
Abhijit Menon-Sen
Jonathan Nieder
Christian Couder
Miklos Vajna
Dan McGee
Shawn O. Pearce
Marco Costalba
Steven Walter
Jakub Narebski
Michael Hendricks
Alex Riesen
Junio C Hamano
Michael S. Tsirkin