summaryrefslogtreecommitdiff
path: root/Documentation/git-grep.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-1/+1
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-1/+1
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-10/+27
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-02Fix doc typos.Libravatar Ralf Wildenhues1-1/+1
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-20Teach git-grep --name-only as synonym for -lLibravatar Shawn O. Pearce1-1/+3
I expected git grep --name-only to give me only the file names, much as git diff --name-only only generates filenames. Alas the option is -l, which matches common external greps but doesn't match other parts of the git UI. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-26Update git-grep documentationLibravatar Andrew Ruder1-4/+15
Documentation/git-grep.txt: Document -F/--fixed-strings to search for non-regexp patterns. Document -I to not search binary files. Document -<num> as a shortcut for -C<num>. Signed-off-by: Andrew Ruder <andy@aeruder.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Documentation: a few spelling fixesLibravatar René Scharfe1-1/+1
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27grep --all-matchLibravatar Junio C Hamano1-1/+10
This lets you say: git grep --all-match -e A -e B -e C to find lines that match A or B or C but limit the matches from the files that have all of A, B and C. This is different from git grep -e A --and -e B --and -e C in that the latter looks for a single line that has all of these at the same time. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-15Document git-grep -[Hh]Libravatar Junio C Hamano1-1/+8
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-11git-grep: show pathnames relative to the current directoryLibravatar Junio C Hamano1-1/+7
By default, the command shows pathnames relative to the current directory. Use --full-name (the same flag to do so in ls-files) if you want to see the full pathname relative to the project root. This makes it very pleasant to run in Emacs compilation (or "grep-find") buffer. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-02git-grep: document --and, --or, --not, ( and )Libravatar Matthias Lederhofer1-3/+17
[jc: added an example section.] Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-25correct documentation for git grepLibravatar Matthias Lederhofer1-1/+6
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Documentation: Spelling fixesLibravatar Horst H. von Brand1-2/+2
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-09builtin-grep: -F (--fixed-strings)Libravatar Junio C Hamano1-1/+1
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-08builtin-grep: documentationLibravatar Junio C Hamano1-23/+62
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-22Format tweaks for asciidoc.Libravatar Francis Daly1-7/+7
Some documentation "options" were followed by independent preformatted paragraphs. Now they are associated plain text paragraphs. The difference is clear in the generated html. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Fix some inconsistencies in the docsLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-21git-grep: clarification on parameters.Libravatar Junio C Hamano1-4/+15
We forgot to make sure that there is no more than one pattern parameter. Also when looking for files in a directory called '--others', it passed that path limiter without preceding the end-of-options marker '--' to underlying git-ls-files, which misunderstood it as one of its options instead. $ git grep --others -e Meta/Make Meta $ git grep -o -e Meta/Make Meta $ git grep -o Meta/Make Meta look for a string "Meta/Make" from untracked files in Meta/ directory. $ git grep Meta/Make --others looks for the same string from tracked files in ./--others directory. On the other hand, $ git grep -e Meta/Make --others does not have a freestanding pattern, so everybody is parameter and there is no path specifier. It looks for the string in all the untracked files without any path limiter. [jc: updated with usability enhancements and documentation cleanups from Sean.] Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05Wrap synopsis lines and use [verse] to keep formattingLibravatar Jonas Fonseca1-2/+1
In addition, also fixes a few synopses to be more consistent and a gitlink. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Remove the version tags from the manpagesLibravatar Junio C Hamano1-1/+0
Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-12Document git-grep and link it from the main git(7) page.Libravatar Junio C Hamano1-0/+47
Also adjust missing description in the git.txt page while we are at it. Signed-off-by: Junio C Hamano <junkio@cox.net>