summaryrefslogtreecommitdiff
path: root/Documentation/git-gc.txt
AgeCommit message (Collapse)AuthorFilesLines
2010-05-21Merge branch 'jc/maint-no-reflog-expire-unreach-for-head'Libravatar Junio C Hamano1-0/+10
* jc/maint-no-reflog-expire-unreach-for-head: reflog --expire-unreachable: special case entries in "HEAD" reflog more war on "sleep" in tests Document gc.<pattern>.reflogexpire variables Conflicts: Documentation/config.txt
2010-04-14Document gc.<pattern>.reflogexpire variablesLibravatar Junio C Hamano1-0/+10
3cb22b8 (Per-ref reflog expiry configuration, 2008-06-15) added support for setting the expiry parameters differently for different reflog, but it was never documented. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-10/+10
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2010-01-10Documentation: format full commands in typewriter fontLibravatar Thomas Rast1-1/+1
Use `code snippet` style instead of 'emphasis' for `git cmd ...` according to the following rules: * The SYNOPSIS sections are left untouched. * If the intent is that the user type the command exactly as given, it is `code`. If the user is only loosely referred to a command and/or option, it remains 'emphasised'. Signed-off-by: Thomas Rast <trast@student.ethz.ch>
2009-10-20Documentation/git-gc.txt: change "references" to "reference"Libravatar Matt Kraai1-1/+1
Signed-off-by: Matt Kraai <kraai@ftbfs.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-09-29Documentation/git-gc.txt: default --aggressive window is 250, not 10Libravatar Brandon Casey1-1/+1
The default --aggressive window has been 250 since 1c192f34 "gc --aggressive: make it really aggressive", released in git v1.6.3. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2009-08-27Fix overridable written with an extra 'e'Libravatar Nanako Shiraishi1-1/+1
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-14gc: make --prune useful again by accepting an optional parameterLibravatar Johannes Schindelin1-1/+9
With this patch, "git gc --no-prune" will not prune any loose (and dangling) object, and "git gc --prune=5.minutes.ago" will prune all loose objects older than 5 minutes. This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-10/+10
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-5/+5
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-3/+3
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-24doc/git-gc: add a note about what is collectedLibravatar Jeff King1-0/+15
It seems to be a FAQ that people try running git-gc, and then get puzzled about why the size of their .git directory didn't change. This note mentions the reasons why things might unexpectedly get kept. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-19make it easier for people who just want to get rid of 'git gc --auto'Libravatar Nicolas Pitre1-2/+9
Give a direct hint to those who feel highly annoyed by the auto gc behavior. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-12gc: call "prune --expire 2.weeks.ago" by defaultLibravatar Johannes Schindelin1-12/+5
The only reason we did not call "prune" in git-gc was that it is an inherently dangerous operation: if there is a commit going on, you will prune loose objects that were just created, and are, in fact, needed by the commit object just about to be created. Since it is dangerous, we told users so. That led to many users not even daring to run it when it was actually safe. Besides, they are users, and should not have to remember such details as when to call git-gc with --prune, or to call git-prune directly. Of course, the consequence was that "git gc --auto" gets triggered much more often than we would like, since unreferenced loose objects (such as left-overs from a rebase or a reset --hard) were never pruned. Alas, git-prune recently learnt the option --expire <minimum-age>, which makes it a much safer operation. This allows us to call prune from git-gc, with a grace period of 2 weeks for the unreferenced loose objects (this value was determined in a discussion on the git list as a safe one). If you want to override this grace period, just set the config variable gc.pruneExpire to a different value; an example would be [gc] pruneExpire = 6.months.ago or even "never", if you feel really paranoid. Note that this new behaviour makes "--prune" be a no-op. While adding a test to t5304-prune.sh (since it really tests the implicit call to "prune"), also the original test for "prune --expire" was moved there from t1410-reflog.sh, where it did not belong. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2008-03-01gc: Add --quiet optionLibravatar Frank Lichtenheld1-1/+4
Pass -q option to git-repack. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-09Change git-gc documentation to reflect gc.packrefs implementation.Libravatar Florian La Roche1-3/+3
56752391a8c0c591853b276e4fa0b45c34ced181 (Make "git gc" pack all refs by default) changed the default of gc.packrefs to true, to pack all refs by default in any repository. IOW, the users need to disable it explicitly if they want to by setting the config variable, since 1.5.3. However, we forgot to update the documentation. This fixes it. Signed-off-by: Florian La Roche <laroche@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-7/+7
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-18Documentation/git-gc: improve description of --autoLibravatar Jeff King1-12/+17
This patch tries to make the description of --auto a little more clear for new users, especially those referred by the "git-gc --auto" notification message. It also cleans up some grammatical errors and typos in the original description, as well as rewording for clarity. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-10-18Documentation/git-gc: explain --auto in descriptionLibravatar Jeff King1-1/+2
Now that git-gc --auto tells the user to look at the man page, it makes sense to mention the auto behavior near the top (since this is likely to be most users' first exposure to git-gc). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-17git-gc --auto: run "repack -A -d -l" as necessary.Libravatar Junio C Hamano1-1/+6
This teaches "git-gc --auto" to consolidate many packs into one without losing unreachable objects in them by using "repack -A" when there are too many packfiles that are not marked with *.keep in the repository. gc.autopacklimit configuration can be used to set the maximum number of packs a repository is allowed to have before this mechanism kicks in. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-17git-gc --auto: add documentation.Libravatar Junio C Hamano1-1/+10
This documents the auto-packing of loose objects performed by git-gc --auto. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-31Fix minor grammatical typos in the git-gc man pageLibravatar Theodore Ts'o1-3/+3
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-10Add --aggressive option to 'git gc'Libravatar Theodore Tso1-1/+15
This option causes 'git gc' to more aggressively optimize the repository at the cost of taking much more wall clock and CPU time. Today this option causes git-pack-objects to use --no-use-delta option, and it allows the --window parameter to be set via the gc.aggressiveWindow configuration parameter. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13git-gc: run pack-refs by default unless the repo is bareLibravatar Johannes Schindelin1-0/+4
The config variable gc.packrefs is tristate now: "true", "false" and "notbare", where "notbare" is the default. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-21git-gc: do not run git-prune by default.Libravatar Junio C Hamano1-1/+16
git-prune is not safe when run uncontrolled in parallel while other git operations are creating new objects. To avoid mistakes, do not run git-prune by default from git-gc. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Documentation: a few spelling fixesLibravatar René Scharfe1-1/+1
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-27Create 'git gc' to perform common maintenance operations.Libravatar Shawn O. Pearce1-0/+64
Junio asked for a 'git gc' utility which users can execute on a regular basis to perform basic repository actions such as: * pack-refs --prune * reflog expire * repack -a -d * prune * rerere gc So here is a command which does exactly that. The parameters fed to reflog's expire subcommand can be chosen by the user by setting configuration options in .git/config (or ~/.gitconfig), as users may want different expiration windows for each repository but shouldn't be bothered to remember what they are all of the time. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>