summaryrefslogtreecommitdiff
path: root/Documentation/git-format-patch.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-11-04Merge branch 'maint'Libravatar Junio C Hamano1-1/+2
* maint: format-patch documentation: mention the special case of showing a single commit
2008-11-02format-patch documentation: mention the special case of showing a single commitLibravatar Junio C Hamano1-1/+2
Even long timers seem to have missed that "format-patch -1 $commit" is a much simpler and more obvious way to say "format-patch $commit^..$commit" from the current documentation (and an example "format-patch -3 $commit" to get three patches). Add an explicit instruction in a much earlier part of the documentation to make it easier to find. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-18format-patch: autonumber by defaultLibravatar Brian Gernhardt1-3/+5
format-patch is most commonly used for multiple patches at once when sending a patchset, in which case we want to number the patches; on the other hand, single patches are not usually expected to be numbered. In other words, the typical behavior expected from format-patch is the one obtained by enabling autonumber, so we set it to be the default. Users that want to disable numbering for a particular patchset can do so with the existing -N command-line switch. Users that want to change the default behavior can use the format.numbering config key. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Test-updates-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14git format-patch documentation: clarify what --cover-letter doesLibravatar Matt McCutchen1-3/+3
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-21Update my e-mail addressLibravatar Junio C Hamano1-1/+1
The old cox.net address is still getting mails from gitters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-3/+3
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05Documentation: more "git-" versus "git " changesLibravatar Jonathan Nieder1-1/+1
With git-commands moving out of $(bindir), it is useful to make a clearer distinction between the git subcommand 'git-whatever' and the command you type, `git whatever <options>`. So we use a dash after "git" when referring to the former and not the latter. I already sent a patch doing this same thing, but I missed some spots. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: fix bogus whitespaceLibravatar Jonathan Nieder1-4/+4
It's distracting. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05git-format-patch(1): fix stray \ in outputLibravatar Jonathan Nieder1-1/+1
In listing blocks (set off by rows of dashes), the usual formatting characters of asciidoc are instead rendered verbatim. When the escaped double-hyphen of olden days is moved into such a block along with other formatting improvements, it becomes backslash-dash-dash. So we remove the backslash. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-5/+10
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28Manual subsection to refer to other pages is SEE ALSOLibravatar Junio C Hamano1-1/+1
Consistently say so in all caps as it is customary to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-14Merge branch 'mv/format-cc'Libravatar Junio C Hamano1-0/+1
* mv/format-cc: Add tests for sendemail.cc configuration variable git-send-email: add a new sendemail.cc configuration variable git-format-patch: add a new format.cc configuration variable
2008-05-11git-format-patch: add --no-binary to omit binary changes in the patch.Libravatar Caio Marcelo de Oliveira Filho1-0/+6
Add a new option --no-binary to git-format-patch so that no binary changes are included in the generated patches, only notices that those files changed. This generate patches that cannot be applied, but still is useful for generating mails for code review purposes. See also: commit e47f306d4bf964def1a0b29e8f7cea419471dffd, where --binary option was turned on by default. Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-06Documentation: improve "add", "pull" and "format-patch" examplesLibravatar Christian Couder1-26/+41
Before this patch in "git-add.txt" and "git-format-patch.txt", the commands used in the examples were "git-CMD" instead of "git CMD". This patch fixes that. In "git-pull.txt" only the last example had the code sample in an asciidoc "Listing Block", and in the other two files, none. This patch fixes that by putting all code samples in listing blocks. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-29git-format-patch: add a new format.cc configuration variableLibravatar Miklos Vajna1-0/+1
Some projects prefer to always CC patches to a given mailing list. In these cases, it's handy to configure that address once. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-19Support a --cc=<email> option in format-patchLibravatar Daniel Barkalow1-0/+5
When you have particular reviewers you want to sent particular series to, it's nice to be able to generate the whole series with them as additional recipients, without configuring them into your general headers or adding them by hand afterwards. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-19Add a --cover-letter option to format-patchLibravatar Daniel Barkalow1-7/+13
If --cover-letter is provided, generate a cover letter message before the patches, numbered 0. Original patch thanks to Johannes Schindelin Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-4/+4
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-15Documentation: customize diff-options depending on particular commandLibravatar Sergei Organov1-0/+1
Customize diff-options depending on particular command as follows, mostly to make git-diff and git-format-patch manuals less confusing: * git-format-patch: - Mark --patch-with-stat as being the default. - Change -p description so that it matches what it actually does and so that it doesn't refer to absent "section on generating patches". * git-diff: mark -p as being the default. * git-diff-index/git-diff-files/git-diff-tree: mark --raw as being the default. Signed-off-by: Sergei Organov <osv@javad.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-05Rearrange git-format-patch synopsis to improve clarity.Libravatar David Symonds1-1/+2
Signed-off-by: David Symonds <dsymonds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-04format-patch: Add configuration and off switch for --numberedLibravatar Brian Gernhardt1-4/+8
format.numbered is a tri-state variable. Boolean values enable or disable numbering by default and "auto" enables number when outputting more than one patch. --no-numbered (short: -N) will disable numbering. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-01git-format-patch.txt: fix explanation of an example.Libravatar Sergei Organov1-1/+1
Signed-off-by: Sergei Organov <osv@javad.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-28format-patch documentation: reword to hint "--root <one-commit>" more clearlyLibravatar Junio C Hamano1-7/+10
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-28"format-patch --root rev" is the way to show everything.Libravatar Junio C Hamano1-7/+22
We used to trigger the special case "things not in origin" semantics only when one and only one positive ref is given, and no number (e.g. "git format-patch -4 origin") was specified, and used the general revision range semantics for everything else. This narrows the special case a bit more, by making: git format-patch --root this_version to show everything that leads to the named commit. More importantly, document the two different semantics better. The generic revision range semantics came later and bolted on without being clearly documented. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24Documentation: Correct various misspellings and typos.Libravatar Brian Hetro1-1/+1
Fix minor typos throughout the documentation. Signed-off-by: Brian Hetro <whee@smaertness.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03Merge branch 'maint'Libravatar Junio C Hamano1-0/+3
* maint: Document -<n> for git-format-patch glossary: add 'reflog' diff --no-index: fix --name-status with added files Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
2007-07-03Document -<n> for git-format-patchLibravatar Miklos Vajna1-0/+3
The -<n> option was not mentioned in git-format-patch's manpage till now. Fix this. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02format-patch: Add format.subjectprefix config optionLibravatar Adam Roben1-2/+3
This change lets you use the format.subjectprefix config option to override the default subject prefix. Signed-off-by: Adam Roben <aroben@apple.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06Add the --numbered-files option to git-format-patch.Libravatar Jon Loeliger1-3/+11
With this option, git-format-patch will generate simple numbered files as output instead of the default using with the first commit line appended. This simplifies the ability to generate an MH-style drafts folder with each message to be sent. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-11Add custom subject prefix support to format-patch (take 3)Libravatar Robin H. Johnson1-5/+12
Add a new option to git-format-patch, entitled --subject-prefix that allows control of the subject prefix '[PATCH]'. Using this option, the text 'PATCH' is replaced with whatever input is provided to the option. This allows easily generating patches like '[PATCH 2.6.21-rc3]' or properly numbered series like '[-mm3 PATCH N/M]'. This patch provides the implementation and documentation. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-10Merge branch 'js/attach'Libravatar Junio C Hamano1-4/+12
* js/attach: format-patch --attach: not folding some long headers. format-patch: add --inline option and make --attach a true attachment
2007-03-05Fix diff-options references in git-diff and git-format-patchLibravatar Brian Gernhardt1-2/+4
Most of the git-diff-* documentation used [<common diff options>] instead of [--diff-options], so make that change in git-diff and git-format-patch. In addition, git-format-patch didn't include the meanings of the diff options. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-04format-patch: add --inline option and make --attach a true attachmentLibravatar Johannes Schindelin1-3/+11
The existing --attach option did not create a true "attachment" but multipart/mixed with Content-Disposition: inline. It should have been with Content-Disposition: attachment. Introduce --inline to add multipart/mixed that is inlined, and make --attach to create an attachement. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-18Document --ignore-if-in-upstream in git-format-patchLibravatar David Kågedal1-0/+8
Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17git-format-patch: the default suffix is now .patch, not .txtLibravatar Junio C Hamano1-8/+7
Editors often give easier handling of patch files if the filename ends with .patch, so use it instead of .txt. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17git-format-patch -3Libravatar Junio C Hamano1-0/+3
This teaches "git-format-patch" to honor the --max-count parameter revision traversal machinery takes, so that you can say "git-format-patch -3" to process the three topmost commits from the current HEAD (or "git-format-patch -2 topic" to name a specific branch). Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Refer users to git-rev-parse for revision specification syntax.Libravatar Shawn O. Pearce1-1/+3
The revision specification syntax (sometimes referred to as SHA1-expressions) is accepted almost everywhere in Git by almost every tool. Unfortunately it is only documented in git-rev-parse.txt, and most users don't know to look there. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-17Introduce 'git-format-patch --suffix=.patch'Libravatar Junio C Hamano1-1/+16
The default can also be changed with "format.suffix" configuration. Leaving it empty would not add any suffix. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-14Add option to set initial In-Reply-To/ReferencesLibravatar Josh Triplett1-0/+6
Add the --in-reply-to option to provide a Message-Id for an initial In-Reply-To/References header, useful for including a new patch series as part of an existing thread. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-14Add option to enable threading headersLibravatar Josh Triplett1-1/+9
Add a --thread option to enable generation of In-Reply-To and References headers, used to make the second and subsequent mails appear as replies to the first. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-06git-format-patch: add --output-directory long option againLibravatar Junio C Hamano1-2/+1
Additionally notices and complains to an -o option without directory or a duplicated -o option, -o and --stdout given together. Also delays the creation of directory until all arguments are parsed, so that the command does not leave an empty directory behind when it exits after seeing an unrelated invalid option. [jc: originally from Dennis Stosberg but with minor fixes, and documentation updates from Dennis.] Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-02Update documentation for git-format-patchLibravatar Dennis Stosberg1-34/+35
[jc: adjusted for recently resurrected features] Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Describe how to add extra mail header lines in mail generated by ↵Libravatar Mike McCormack1-0/+9
git-format-patch.
2006-03-09Document the --attach flag.Libravatar Mike McCormack1-1/+4
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-07format-patch: Remove last vestiges of --mbox optionLibravatar Andreas Ericsson1-22/+10
Don't mention it in docs or --help output. Remove mbox, date and author variables from git-format-patch.sh. Use DESCRIPTION text from man-page to update LONG_USAGE output. It's a bit silly to have two texts saying the same thing in different words, and I'm too lazy to update both. Signed-off-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <junkio@cox.net>