| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* er/doc-fast-import-done:
fast-import: document the --done option
|
|
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our documentation was written for an ancient version of AsciiDoc,
making the source not very readable.
By Jeff King
* jk/doc-asciidoc-inline-literal:
docs: stop using asciidoc no-inline-literal
|
|
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If fast-import's command pipe and the frontend's cat-blob/ls response
pipe are both filled, there can be a deadlock. Luckily all existing
frontends consume any pending cat-blob/ls responses completely before
writing the next command.
Document the requirements so future frontend authors and users can be
spared from the problem, too. It is not always easy to catch that
kind of bug by testing.
To set the scene, add some words of explanation to help the novice
understand that "cat-blob" and "ls" output are meant for consumption
by the frontend.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* di/fast-import-ident:
fsck: improve committer/author check
fsck: add a few committer name tests
fast-import: check committer name more strictly
fast-import: don't fail on omitted committer name
fast-import: add input format tests
|
|
* di/fast-import-doc:
doc/fast-import: document feature import-marks-if-exists
|
|
fast-import command-line option --import-marks-if-exists was introduced
in commit dded4f1 (fast-import: Introduce --import-marks-if-exists, 2011-01-15)
--import-marks option can be set via a "feature" command in a fast-import
stream and --import-marks-if-exists had support for such specification
from the very beginning too due to some shared codebase. Though the
documentation for this feature wasn't written in dded4f1.
Add the documentation for "feature import-marks-if-exists=<file>". Also add
a minimalistic test for it.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation declares following identity format:
(<name> SP)? LT <email> GT
where name is any string without LF and LT characters.
But fast-import just accepts any string up to first GT
instead of checking the whole format, and moreover just
writes it as is to the commit object.
git-fsck checks for [^<\n]* <[^<>\n]*> format. Note that the
space is mandatory. And the space quirk is already handled via
extending the string to the left when needed.
Modify fast-import input identity format to a slightly stricter
one - deny LF, LT and GT in both <name> and <email>. And check
for it.
This is stricter then git-fsck as fsck accepts "Name> <email>"
currently, but soon fsck check will be adjusted likewise.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sr/transport-helper-fix: (21 commits)
transport-helper: die early on encountering deleted refs
transport-helper: implement marks location as capability
transport-helper: Use capname for refspec capability too
transport-helper: change import semantics
transport-helper: update ref status after push with export
transport-helper: use the new done feature where possible
transport-helper: check status code of finish_command
transport-helper: factor out push_update_refs_status
fast-export: support done feature
fast-import: introduce 'done' command
git-remote-testgit: fix error handling
git-remote-testgit: only push for non-local repositories
remote-curl: accept empty line as terminator
remote-helpers: export GIT_DIR variable to helpers
git_remote_helpers: push all refs during a non-local export
transport-helper: don't feed bogus refs to export push
git-remote-testgit: import non-HEAD refs
t5800: document some non-functional parts of remote helpers
t5800: use skip_all instead of prereq
t5800: factor out some ref tests
...
|
|
* mz/doc-synopsis-verse:
Documentation: use [verse] for SYNOPSIS sections
Conflicts:
Documentation/git-mergetool--lib.txt
|
|
The "notemodify" fast-import command was introduced in commit a8dd2e7
(fast-import: Add support for importing commit notes, 2009-10-09)
The commit log has slightly different description than the added
documentation. The latter is somewhat confusing. "notemodify" is a
subcommand of "commit" command used to add a note for some commit.
Does this note annotate the commit produced by the "commit" command
or a commit given by it's committish parameter? Which notes tree
does it write notes to?
The exact meaning could be deduced with old description and some
notes machinery knowledge. But let's make it more obvious. This
command is used in a context like "commit refs/notes/test" to
add or rewrite an annotation for a committish parameter. So the
advised way to add notes in a fast-import stream is:
1) import some commits (optional)
2) prepare a "commit" to the notes tree:
2.1) choose notes ref, committer, log message, etc.
2.2) create annotations with "notemodify", where each can refer to
a commit being annotated via a branch name, import mark reference,
sha1 and other expressions specified in the Documentation.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a 'done' command that causes fast-import to stop reading from the
stream and exit.
If the new --done command line flag was passed on the command line
(or a "feature done" declaration included at the start of the stream),
make the 'done' command mandatory. So "git fast-import --done"'s
input format will be prefix-free, making errors easier to detect when
they show up as early termination at some convenient time of the
upstream of a pipe writing to fast-import.
Another possible application of the 'done' command would to be allow a
fast-import stream that is only a small part of a larger encapsulating
stream to be easily parsed, leaving the file offset after the "done\n"
so the other application can pick up from there. This patch does not
teach fast-import to do that --- fast-import still uses buffered input
(stdio).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove spurious "=" after --relative-marks.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
|
|
Lazy fast-import frontend authors that want to rely on the backend to
keep track of the content of the imported trees _almost_ have what
they need in the 'cat-blob' command (v1.7.4-rc0~30^2~3, 2010-11-28).
But it is not quite enough, since
(1) cat-blob can be used to retrieve the content of files, but
not their mode, and
(2) using cat-blob requires the frontend to keep track of a name
(mark number or object id) for each blob to be retrieved
Introduce an 'ls' command to complement cat-blob and take care of the
remaining needs. The 'ls' command finds what is at a given path
within a given tree-ish (tag, commit, or tree):
'ls' SP <dataref> SP <path> LF
or in fast-import's active commit:
'ls' SP <path> LF
The response is a single line sent through the cat-blob channel,
imitating ls-tree output. So for example:
FE> ls :1 Documentation
gfi> 040000 tree 9e6c2b599341d28a2a375f8207507e0a2a627fe9 Documentation
FE> ls 9e6c2b599341d28a2a375f8207507e0a2a627fe9 git-fast-import.txt
gfi> 100644 blob 4f92954396e3f0f97e75b6838a5635b583708870 git-fast-import.txt
FE> ls :1 RelNotes
gfi> 120000 blob b942e499449d97aeb50c73ca2bdc1c6e6d528743 RelNotes
FE> cat-blob b942e499449d97aeb50c73ca2bdc1c6e6d528743
gfi> b942e499449d97aeb50c73ca2bdc1c6e6d528743 blob 32
gfi> Documentation/RelNotes/1.7.4.txt
The most interesting parts of the reply are the first word, which is
a 6-digit octal mode (regular file, executable, symlink, directory,
or submodule), and the part from the second space to the tab, which is
a <dataref> that can be used in later cat-blob, ls, and filemodify (M)
commands to refer to the content (blob, tree, or commit) at that path.
If there is nothing there, the response is "missing some/path".
The intent is for this command to be used to read files from the
active commit, so a frontend can apply patches to them, and to copy
files and directories from previous revisions.
For example, proposed updates to svn-fe use this command in place of
its internal representation of the repository directory structure.
This simplifies the frontend a great deal and means support for
resuming an import in a separate fast-import run (i.e., incremental
import) is basically free.
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
|
|
* rr/fi-import-marks-if-exists:
fast-import: Introduce --import-marks-if-exists
|
|
* maint-1.7.0:
fast-import: introduce "feature notes" command
fast-import: clarify documentation of "feature" command
Conflicts:
Documentation/git-fast-import.txt
|
|
Here is a 'feature' command for streams to use to require support for
the notemodify (N) command.
When the 'feature' facility was introduced (v1.7.0-rc0~95^2~4,
2009-12-04), the notes import feature was old news (v1.6.6-rc0~21^2~8,
2009-10-09) and it was not obvious it deserved to be a named feature.
But now that is clear, since all major non-git fast-import backends
lack support for it.
Details: on git version with this patch applied, any "feature notes"
command in the features/options section at the beginning of a stream
will be treated as a no-op. On fast-import implementations without
the feature (and older git versions), the command instead errors out
with a message like
This version of fast-import does not support feature notes.
So by declaring use of notes at the beginning of a stream, frontends
can avoid wasting time and other resources when the backend does not
support notes. (This would be especially important for backends that
do not support rewinding history after a botched import.)
Improved-by: Thomas Rast <trast@student.ethz.ch>
Improved-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "feature" command allows streams to specify options for the import
that must not be ignored. Logically, they are part of the stream,
even though technically most supported features are synonyms to
command-line options.
Make this more obvious by being more explicit about how the analogy
between most "feature" commands and command-line options works. Treat
the feature (import-marks) that does not fit this analogy separately.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Omit needless words ("Additionally ... <path> may also" is redundant).
While at it, place the explanation of this special case after the
general rules for paths to provide the reader with some context.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a frontend uses a marks file to ensure its state persists between
runs, it may represent "clean slate" when bootstrapping with "no marks
yet". In such a case, feeding the last state with --import-marks and
saving the state after the current run with --export-marks would be a
natural thing to do.
The --import-marks option however errors out when the specified marks file
doesn't exist; this makes bootstrapping a bit difficult. The location of
the marks file becomes backend-dependent when --relative-marks is in
effect, and the frontend cannot check for the existence of the file in
such a case.
The --import-marks-if-exists option does the same thing as --import-marks
but does not flag an error if the named file does not exist yet to help
these frontends.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/fast-import-blob-access:
t9300: avoid short reads from dd
t9300: remove unnecessary use of /dev/stdin
fast-import: Allow cat-blob requests at arbitrary points in stream
fast-import: let importers retrieve blobs
fast-import: clarify documentation of "feature" command
fast-import: stricter parsing of integer options
Conflicts:
fast-import.c
|
|
The new rule: a "cat-blob" can be inserted wherever a comment is
allowed, which means at the start of any line except in the middle of
a "data" command.
This saves frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
New objects written by fast-import are not available immediately.
Until a checkpoint has been started and finishes writing the pack
index, any new blobs will not be accessible using standard git tools.
So introduce a new way to access them: a "cat-blob" command in the
command stream requests for fast-import to print a blob to stdout or a
file descriptor specified by the argument to --cat-blob-fd. The value
for cat-blob-fd cannot be specified in the stream because that would
be a layering violation: the decision of where to direct a stream has
to be made when fast-import is started anyway, so we might as well
make the stream format is independent of that detail.
Output uses the same format as "git cat-file --batch".
Thanks to Sverre Rabbelier and Sam Vilain for guidance in designing
the protocol.
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Barr <david.barr@cordelta.com>
Acked-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "feature" command allows streams to specify options for the import
that must not be ignored. Logically, they are part of the stream,
even though technically most supported features are synonyms to
command-line options.
Make this more obvious by being more explicit about how the analogy
between most "feature" commands and command-line options works. Treat
the feature (import-marks) that does not fit this analogy separately.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be tedious to wait for a multi-million-revision import.
Unfortunately it is hard to spy on the import because fast-import
works by continuously streaming out objects, without updating the pack
index or refs until a checkpoint command or the end of the stream.
So allow the impatient operator to request checkpoints by sending a
signal, like so:
killall -USR1 git-fast-import
When receiving such a signal, fast-import would schedule a checkpoint
to take place after the current top-level command (usually a "commit"
or "blob" request) finishes.
Caveats: just like ordinary checkpoint commands, such requests slow
down the import. Switching to a new pack at a suboptimal moment is
also likely to result in a less dense initial collection of packs.
That's the price.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
|
|
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642cb6eb9a060e54bf8d69288fbee4904 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642cb6eb9a060e54bf8d69288fbee4904
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/fast-import-subtree:
Teach fast-import to import subtrees named by tree id
|
|
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To simulate the svn cp command, it would be very useful to be
replace an arbitrary file in the current revision by an
arbitrary directory from a previous one. Modify the filemodify
command to allow that:
M 040000 <tree id> pathname
This would be most useful in combination with a facility to
print the commit ids for new revisions as they are written.
Cc: Shawn O. Pearce <spearce@spearce.org>
Cc: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that fast-import is creating packs with index version 2, there is
no point limiting the pack size by default. A pack split will still
happen if off_t is not sufficiently large to hold large offsets.
While updating the doc, let's remove the "packfiles fit on CDs"
suggestion. Pack files created by fast-import are still suboptimal and
a 'git repack -a -f -d' or even 'git gc --aggressive' would be a pretty
good idea before considering storage on CDs.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar in spirit to 07cf0f2 (make --max-pack-size argument to 'git
pack-object' count in bytes, 2010-02-03) which made the option by the same
name to pack-objects, this counts the pack size limit in bytes.
In order not to cause havoc with people used to the previous megabyte
scale an integer smaller than 8192 is interpreted in megabytes but the
user gets a warning. Also a minimum size of 1 MiB is enforced to avoid an
explosion of pack files.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
|
|
* sp/fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
|
|
* sp/maint-fast-import-large-blob:
fast-import: Stream very large blobs directly to pack
bash: don't offer remote transport helpers as subcommands
Conflicts:
fast-import.c
|
|
If a blob is larger than the configured big-file-threshold, instead
of reading it into a single buffer obtained from malloc, stream it
onto the end of the current pack file. Streaming the larger objects
into the pack avoids the 4+ GiB memory footprint that occurs when
fast-import is processing 2+ GiB blobs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
|
|
* sr/gfi-options:
fast-import: add (non-)relative-marks feature
fast-import: allow for multiple --import-marks= arguments
fast-import: test the new option command
fast-import: add option command
fast-import: add feature command
fast-import: put marks reading in its own function
fast-import: put option parsing code in separate functions
|
|
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
|
|
The fast-import parser does not validate that the author, committer
or tagger name component contains both a name and an email address.
Therefore the name component has always been optional. Correct the
documentation to match the implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After specifying 'feature relative-marks' the paths specified with
'feature import-marks' and 'feature export-marks' are relative to an
internal directory in the current repository.
In git-fast-import this means that the paths are relative to the
'.git/info/fast-import' directory. However, other importers may use a
different location.
Add 'feature non-relative-marks' to disable this behavior, this way
it is possible to, for example, specify the import-marks location as
relative, and the export-marks location as non-relative.
Also add tests to verify this behavior.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --import-marks= option may be specified multiple times on the
commandline and should result in all marks being read in. Only one
import-marks feature may be specified in the stream, which is
overriden by any --import-marks= commandline options.
If one wishes to specify import-marks files in addition to the one
specified in the stream, it is easy to repeat the stream option as a
--import-marks= commandline option.
Also verify this behavior with tests.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows the frontend to specify any of the supported options as
long as no non-option command has been given. This way the
user does not have to include any frontend-specific options, but
instead she can rely on the frontend to tell fast-import what it
needs.
Also factor out parsing of argv and have it execute when we reach the
first non-option command, or after all commands have been read and
no non-option command has been encountered.
Non-git options are ignored, unrecognised options result in an error.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows the fronted to require a specific feature to be supported
by the backend, or abort.
Also add support for four initial feature, date-format=, force=,
import-marks=, export-marks=.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a 'notemodify' subcommand of the 'commit' command. This subcommand
is similar to 'filemodify', except that no mode is supplied (all notes have
mode 0644), and the path is set to the hex SHA1 of the given "comittish".
This enables fast import of note objects along with their associated commits,
since the notes can now be named using the mark references of their
corresponding commits.
The patch also includes a test case of the added functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Eric S. Raymond
Jeff King
Jonathan Nieder
Dmitry Ivankov
Sverre Rabbelier
Martin von Zweigbergk
Michael J Gruber
David Barr
Ramkumar Ramachandra
Nicolas Pitre
Shawn O. Pearce
Ralf Wildenhues
Thomas Rast
Johan Herland