| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When converting a repository using submodules from one hash algorithm to
another, it is necessary to rewrite the submodules from the old
algorithm to the new algorithm, since only references to submodules, not
their contents, are written to the fast-export stream. Without rewriting
the submodules, fast-import fails with an "Invalid dataref" error when
encountering a submodule in another algorithm.
Add a pair of options, --rewrite-submodules-from and
--rewrite-submodules-to, that take a list of marks produced by
fast-export and fast-import, respectively, when processing the
submodule. Use these marks to map the submodule commits from the old
algorithm to the new algorithm.
We read marks into two corresponding struct mark_set objects and then
perform a mapping from the old to the new using a hash table. This lets
us reuse the same mark parsing code that is used elsewhere and allows us
to efficiently read and match marks based on their ID, since mark files
need not be sorted.
Note that because we're using a khash table for the object IDs, and this
table copies values of struct object_id instead of taking references to
them, it's necessary to zero the struct object_id values that we use to
insert and look up in the table. Otherwise, we would end up with SHA-1
values that don't match because of whatever stack garbage might be left
in the unused area.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
|
* maint-2.22: (43 commits)
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
...
|
|
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
|
|
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
|
|
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
|
|
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
This fixes CVE-2019-1348.
Signed-off-by: Jeff King <peff@peff.net>
|
|
fast-export and fast-import have nice --import-marks flags which allow
for incremental migrations. However, if there is a mark in
fast-export's file of marks without a corresponding mark in the one for
fast-import, then we run the risk that fast-export tries to send new
objects relative to the mark it knows which fast-import does not,
causing fast-import to fail.
This arises in practice when there is a filter of some sort running
between the fast-export and fast-import processes which prunes some
commits programmatically. Provide such a filter with the ability to
alias pruned commits to their most recent non-pruned ancestor.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* en/fast-import-merge-doc:
git-fast-import.txt: clarify that multiple merge commits are allowed
|
|
The grammar for commits used a '?' rather than a '*' on the `merge`
directive line, despite the fact that the code allows multiple `merge`
directives in order to support n-way merges. In fact, elsewhere in
git-fast-import.txt there is an explicit declaration that "an unlimited
number of `merge` commands per commit are permitted by fast-import".
Fix the grammar to match the intent and implementation.
Reported-by: Joachim Klein <joachim.klein@automata.tools>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by 21416f0a07 ("restore: fix typo in docs", 2019-08-03), I ran
"git grep -E '(\b[a-zA-Z]+) \1\b' -- Documentation/" to find other cases
where words were duplicated, e.g. "the the", and in most cases removed
one of the repeated words.
There were many false positives by this grep command, including
deliberate repeated words like "really really" or valid uses of "that
that" which I left alone, of course.
I also did not correct any of the legitimate, accidentally repeated
words in old RelNotes.
Signed-off-by: Mark Rushakoff <mark.rushakoff@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since git supports commit messages with an encoding other than UTF-8,
allow fast-import to import such commits. This may be useful for folks
who do not want to reencode commit messages from an external system, and
may also be useful to achieve reversible history rewrites (e.g. sha1sum
<-> sha256sum transitions or subtree work) with git repositories that
have used specialized encodings in their commit history.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update docs around "gc".
* ab/gc-docs:
gc docs: remove incorrect reference to gc.auto=0
gc docs: clarify that "gc" doesn't throw away referenced objects
gc docs: note "gc --aggressive" in "fast-import"
gc docs: downplay the usefulness of --aggressive
gc docs: note how --aggressive impacts --window & --depth
gc docs: fix formatting for "gc.writeCommitGraph"
gc docs: re-flow the "gc.*" section in "config"
gc docs: include the "gc.*" section from "config" in "gc"
gc docs: clean grammar for "gc.bigPackThreshold"
gc docs: stop noting "repack" flags
gc docs: modernize the advice for manually running "gc"
|
|
Amend the "PACKFILE OPTIMIZATION" section in "fast-import" to explain
that simply running "git gc --aggressive" after a "fast-import" should
properly optimize the repository. This is simpler and more effective
than the existing "repack" advice (which I'm keeping as it helps
explain things) because it e.g. also packs the newly imported refs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get-mark was introduced in commit 28c7b1f7b7b7 ("fast-import: add a
get-mark command", 2015-07-01), it followed the precedent of the
cat-blob command to be allowed on any line other than in the middle of a
data directive; see commit 777f80d7429b ("fast-import: Allow cat-blob
requests at arbitrary points in stream", 2010-11-28). It was useful to
allow cat-blob directives in the middle of a commit to get more data
that would be used in writing the current commit object. get-mark is
not similarly useful since fast-import can already use either object id
or mark. Further, trying to allow this command anywhere caused parsing
bugs. Fix the parsing problems by only allowing get-mark commands to
appear when other commands have completed.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 777f80d7429b ("fast-import: Allow cat-blob requests at
arbitrary points in stream", 2010-11-28), fast-import started allowing
cat-blob commands to appear on the start of any line except in the
middle of a "data" command. It could be in the middle of various
directives that were part of a tag command, or in the middle of
checkpoints or progresses (each of which allow an optional second empty
newline), or even immediately after the mark command of a blob before
the data directive appeared (raising the question of what if it used the
mark for the blob that just barely appeared in the stream that we do not
yet have the data for). None of these locations make any sense as
places to put cat-blob requests.
The purpose of this change as stated in that commit message was to
[save] frontends from having to loop over everything they want to
commit in the next commit and cat-ing the necessary objects in
advance.
However, that can be achieved by simply allowing cat-blob requests to
appear whenever a filemodify directive is allowed. Further, it avoids
setting a bad precedent for other commands to follow (e.g. get-mark); a
precedent which caused parsing problems in corner cases.
Technically, inline filemodify directives add a slight wrinkle in that
frontends might want to have cat-blob directives appear after the start
of the filemodify and before the data directive contained within it. I
think it would have been better to disallow such a case (it would be
trivial to use cat-blob before the filemodify instead), but since there
is evidence this was used, for backwards compatibility let's support
that case too.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The docs claimed `ls` commands could appear almost anywhere, but the
code told a different story. Modify the docs to match the code.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Knowing the original names (hashes) of commits can sometimes enable
post-filtering that would otherwise be difficult or impossible. In
particular, the desire to rewrite commit messages which refer to other
prior commits (on top of whatever other filtering is being done) is
very difficult without knowing the original names of each commit.
In addition, knowing the original names (hashes) of blobs can allow
filtering by blob-id without requiring re-hashing the content of the
blob, and is thus useful as a small optimization.
Once we add original ids for both commits and blobs, we may as well
add them for tags too for completeness. Perhaps someone will have a
use for them.
This commit teaches a new --show-original-ids option to fast-export
which will make it add a 'original-oid <hash>' line to blob, commits,
and tags. It also teaches fast-import to parse (and ignore) such
lines.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The standard for command documentation synopses appears to be:
[...] means optional
<...> means replaceable
[<...>] means both optional and replaceable
So fix a number of doc pages that use incorrect variations of the
above.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 618e613a70, 10 years ago, the default for pack depth used for
git-pack-objects and git-repack was changed from 10 to 50, while
leaving fast-import's default to 10.
There doesn't seem to be a reason besides oversight for the change not
having happened in fast-import as well.
Interestingly, fast-import uses pack.depth when it's set, and the
git-config manual says the default for pack.depth is 50. While the
git-fast-import manual does say the default depth is 10, the
inconsistency is also confusing.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More mark-up updates to typeset strings that are expected to
literally typed by the end user in fixed-width font.
* mm/doc-tt:
doc: typeset HEAD and variants as literal
CodingGuidelines: formatting HEAD in documentation
doc: typeset long options with argument as literal
doc: typeset '--' as literal
doc: typeset long command-line options as literal
doc: typeset short command-line options as literal
Documentation/git-mv.txt: fix whitespace indentation
|
|
This was obtained with:
perl -pi -e "s/'--'/\`--\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With many incremental imports, small packs become highly
inefficient due to the need to readdir scan and load many
indices to locate even a single object. Frequent repacking and
consolidation may be prohibitively expensive in terms of disk
I/O, especially in large repositories where the initial packs
were aggressively optimized and marked with .keep files.
In those cases, users may be better served with loose objects
and relying on "git gc --auto".
This changes the default behavior of fast-import for small
imports found in test cases, so adjustments to t9300 were
necessary.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-import" learned to respond to the get-mark command via
its cat-blob-fd interface.
* mh/fast-import-get-mark:
fast-import: add a get-mark command
|
|
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Older versions of AsciiDoc would convert the "--" in
"--option" into an emdash. According to 565e135
(Documentation: quote double-dash for AsciiDoc, 2011-06-29),
this is fixed in AsciiDoc 8.3.0. According to bf17126, we
don't support anything older than 8.4.1 anyway, so we no
longer need to worry about quoting.
Even though this does not change the output at all, there
are a few good reasons to drop the quoting:
1. It makes the source prettier to read.
2. We don't quote consistently, which may be confusing when
reading the source.
3. Asciidoctor does not like the quoting, and renders a
literal backslash.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In AsciiDoc, it is OK to say:
this is my title
-------------------------
but AsciiDoctor is more strict. Let's match the underline to
the title (which also makes the source prettier to read).
The output from AsciiDoc is the same either way.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation update.
* jn/doc-fast-import-no-16-octopus-limit:
fast-import doc: remove suggested 16-parent limit
|
|
Documentation update.
* jn/doc-fast-import-no-16-octopus-limit:
fast-import doc: remove suggested 16-parent limit
|
|
Merges with an absurd number of parents are still a bad idea because
they do not render well in tools like gitk, but if they are present
in the repository being imported into git then there's no need to
avoid reproducing them faithfully.
In olden times, before v1.6.0-rc0~194 (2008-06-27), git commit-tree
and higher-level tools built on top of it were limited to writing 16
parents for a commit. Nowadays normal git operations are happy to
write more parents when asked, so the motivation for this note in the
fast-import documentation is gone and we can remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In particular, git-fast-import and -export link to each
other, and gitremote-helpers links to existing remote
helpers, and vice versa. Also link to fast-import from the
remote helper spec, as this is relevant for remote helpers
using the fast-import format.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow remote-helper/fast-import based transport to rename the refs
while transferring the history.
* fc/remote-helper-refmap:
transport-helper: remove unnecessary strbuf resets
transport-helper: add support to delete branches
fast-export: add support to delete refs
fast-import: add support to delete refs
transport-helper: add support to push symbolic refs
transport-helper: add support for old:new refspec
fast-export: add new --refspec option
fast-export: improve argument parsing
|
|
other minor grammatical issues
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"timezone" is two words, not one (i.e. "time zone" is correct).
Correct this in these files:
-- date-formats.txt
-- git-blame.txt
-- git-cvsimport.txt
-- git-fast-import.txt
-- git-svn.txt
-- gitweb.conf.txt
-- rev-list-options.txt
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
|
|
Replace 'committish' in documentation and comments with 'commit-ish'
to match gitglossary(7) and to be consistent with 'tree-ish'.
The only remaining instances of 'committish' are:
* variable, function, and macro names
* "(also committish)" in the definition of commit-ish in
gitglossary[7]
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In most cases, "feature <foo>" does not just require that the feature
exists, but also changes the behavior by enabling it.
Cases where the feature is only requested like cat-blob, notes or ls are
clearly documented below.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-fast-import-doc-reorder:
git-fast-import(1): reorganise options
git-fast-import(1): combine documentation of --[no-]relative-marks
|
|
The options in git-fast-import(1) are not currently arranged in a
logical order, which has caused the '--done' options to be documented
twice (commit 3266de10).
Rearrange them into logical groups under subheadings.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The descriptions of '--relative-marks' and '--no-relative-marks' make
more sense when read together instead of as two independent options.
Combine them into a single description block.
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-fast-import-doc-dedup-done:
git-fast-import(1): remove duplicate '--done' option
|
|
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Email addresses in documentation are converted into mailto: hyperlinks
in the HTML output and footnotes in man pages. This isn't desirable for
cases where the address is used as an example and is not valid.
Particularly annoying is the example "jane@laptop.(none)" which appears
in git-shortlog(1) as "jane@laptop[1].(none)", with note 1 saying:
1. jane@laptop
mailto:jane@laptop
Fix this by escaping these email addresses with a leading backslash, to
prevent Asciidoc expanding them as inline macros.
In the case of mailmap.txt, render the address monospaced so that it
matches the block examples surrounding that paragraph.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation mentioned only newlines and double quotes as
characters needing escaping, but the backslash also needs it. Also, the
documentation was not clearly saying that double quotes around the file
name were required (double quotes in the examples could be interpreted as
part of the sentence, not part of the actual string).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
brian m. carlson
Johannes Schindelin
Jeff King
Elijah Newren
Junio C Hamano
Mark Rushakoff
Ævar Arnfjörð Bjarmason
Robert P. J. Day
Nguyễn Thái Ngọc Duy
Mike Hommey
Matthieu Moy
Eric Wong
Michael Haggerty
Jonathan Nieder
Max Horn
Jason St. John
Felipe Contreras
Richard Hansen
John Keeping