summaryrefslogtreecommitdiff
path: root/Documentation/git-fast-export.txt
AgeCommit message (Collapse)AuthorFilesLines
2013-04-07fast-export: Allow pruned-references in mark fileLibravatar Antoine Pelisse1-0/+2
fast-export can fail because of some pruned-reference when importing a mark file. The problem happens in the following scenario: $ git fast-export --export-marks=MARKS master (rewrite master) $ git prune $ git fast-export --import-marks=MARKS master This might fail if some references have been removed by prune because some marks will refer to no longer existing commits. git-fast-export will not need these objects anyway as they were no longer reachable. We still need to update last_numid so we don't change the mapping between marks and objects for remote-helpers. Unfortunately, the mark file should not be rewritten without lost marks if no new objects has been exported, as we could lose track of the last last_numid. Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26docs: stop using asciidoc no-inline-literalLibravatar Jeff King1-1/+1
In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.*[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\*` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-01Merge branch 'sr/transport-helper-fix'Libravatar Junio C Hamano1-0/+4
* sr/transport-helper-fix: (21 commits) transport-helper: die early on encountering deleted refs transport-helper: implement marks location as capability transport-helper: Use capname for refspec capability too transport-helper: change import semantics transport-helper: update ref status after push with export transport-helper: use the new done feature where possible transport-helper: check status code of finish_command transport-helper: factor out push_update_refs_status fast-export: support done feature fast-import: introduce 'done' command git-remote-testgit: fix error handling git-remote-testgit: only push for non-local repositories remote-curl: accept empty line as terminator remote-helpers: export GIT_DIR variable to helpers git_remote_helpers: push all refs during a non-local export transport-helper: don't feed bogus refs to export push git-remote-testgit: import non-HEAD refs t5800: document some non-functional parts of remote helpers t5800: use skip_all instead of prereq t5800: factor out some ref tests ...
2011-07-19fast-export: support done featureLibravatar Sverre Rabbelier1-0/+4
If fast-export is being used to generate a fast-import stream that will be used afterwards it is desirable to indicate the end of the stream with the new 'done' command. Add a flag that causes fast-export to end with 'done'. Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-06Documentation: use [verse] for SYNOPSIS sectionsLibravatar Martin von Zweigbergk1-0/+1
The SYNOPSIS sections of most commands that span several lines already use [verse] to retain line breaks. Most commands that don't span several lines seem not to use [verse]. In the HTML output, [verse] does not only preserve line breaks, but also makes the section indented, which causes a slight inconsistency between commands that use [verse] and those that don't. Use [verse] in all SYNOPSIS sections for consistency. Also remove the blank lines from git-fetch.txt and git-rebase.txt to align with the other man pages. In the case of git-rebase.txt, which already uses [verse], the blank line makes the [verse] not apply to the last line, so removing the blank line also makes the formatting within the document more consistent. While at it, add single quotes to 'git cvsimport' for consistency with other commands. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-9/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-10-08Use angles for placeholders consistentlyLibravatar Štěpán Němec1-1/+1
Signed-off-by: Štěpán Němec <stepnem@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-03Merge branch 'jn/doc-backslash'Libravatar Junio C Hamano1-1/+1
* jn/doc-backslash: Documentation: remove stray backslash in show-branch discussion Documentation: remove stray backslashes from "Fighting regressions" article Documentation: do not convert ... operator to ellipses Documentation: avoid stray backslash in user manual Documentation: avoid stray backslashes in core tutorial Documentation: remove stray backslashes in rev-parse manual Documentation: remove backslash before ~ in fast-import manual Documentation: remove stray backslash from "git bundle" manual Documentation/technical: avoid stray backslash in parse-options API docs Documentation: remove backslashes in manpage synopses Documentation: clarify quoting in gitignore docs Documentation: clarify quoting in "git rm" example Documentation: add missing quotes to "git grep" examples Documentation: clarify quoting in "git add" example Documentation: unbreak regex in show-ref manual Documentation: quoting trouble in "git rm" discussion Documentation: tweak description of log.date
2010-08-20Documentation: remove backslash before ~ in fast-import manualLibravatar Jonathan Nieder1-1/+1
Use the {tilde} entity to get a literal tilde without fuss. With \~, asciidoc 8.5.2 (and probably earlier versions) keeps the backslash in the output. Reported-by: Frédéric Brière <fbriere@fbriere.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-19fast-export: Add a --full-tree optionLibravatar Elijah Newren1-0/+6
This option adds symmetry with fast-import, enabling it to also work with complete trees instead of just incremental changes. It works by issuing a 'deleteall' directive with each commit and then listing the full set of files that make up that commit, rather than just showing the list of files that have changed since the (first) parent commit. Note that this functionality is automatically turned on when using --import-marks together with path limiting in order to avoid dropping important but unchanged files. This functionality is desired when using hand-written filters along with 'fast-export | some-filter | fast-import' as it can be easier to write <some-filter> in terms of complete trees than incremental changes. We could avoid the need to add this option by simply always turning it on. While the end result would be identical, it would slow things down slightly by printing many more filenames per commit which goes somewhat against the 'fast' in 'fast-export'. Signed-off-by: Elijah Newren <newren@gmail.com> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-31Fix typos in technical documentation.Libravatar Ralf Wildenhues1-1/+1
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-6/+6
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-07-31git fast-export: add --no-data optionLibravatar Geoffrey Irving1-0/+8
When using git fast-export and git fast-import to rewrite the history of a repository with large binary files, almost all of the time is spent dealing with blobs. This is extremely inefficient if all we want to do is rewrite the commits and tree structure. --no-data skips the output of blobs and writes SHA-1s instead of marks, which provides a massive speedup. Signed-off-by: Geoffrey Irving <irving@naml.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27fast-export: Document the fact that git-rev-list arguments are acceptedLibravatar Elijah Newren1-0/+6
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-27fast-export: Add a --tag-of-filtered-object option for newly dangling tagsLibravatar Elijah Newren1-0/+11
When providing a list of paths to limit what is exported, the object that a tag points to can be filtered out entirely. This new switch allows the user to specify what should happen to the tag in such a case. The default action, 'abort' will exit with an error message. With 'drop', the tag will simply be omitted from the output. With 'rewrite', if the object tagged was a commit, the tag will be modified to tag an alternate commit. The alternate commit is determined by treating the original commit as the "parent" of the tag and then using the parent rewriting algorithm of the revision traversal machinery (related to the "--parents" option of "git rev-list") Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19Merge branch 'maint' to sync with GIT 1.6.0.6Libravatar Junio C Hamano1-0/+6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-19fast-export: deal with tag objects that do not have a taggerLibravatar Johannes Schindelin1-0/+6
When no tagger was found (old Git produced tags like this), no "tagger" line is printed (but this is incompatible with the current git fast-import). Alternatively, you can pass the option --fake-missing-tagger, forcing fast-export to fake a tagger Unspecified Tagger <no-tagger> with a tag date of the beginning of (Unix) time in the case of a missing tagger, so that fast-import is still able to import the result. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-12-09Improve language in git-merge.txt and related docsLibravatar Ralf Wildenhues1-1/+1
Improve some minor language and format issues like hyphenation, phrases, spacing, word order, comma, attributes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-29Support copy and rename detection in fast-export.Libravatar Alexander Gavrilov1-0/+9
Although it does not matter for Git itself, tools that export to systems that explicitly track copies and renames can benefit from such information. This patch makes fast-export output correct action logs when -M or -C are enabled. Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-4/+4
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-4/+4
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-19builtin-fast-export: Add importing and exporting of revision marksLibravatar Pieter de Bie1-0/+20
This adds the --import-marks and --export-marks to fast-export. These import and export the marks used to for all revisions exported in a similar fashion to what fast-import does. The format is the same as fast-import, so you can create a bidirectional importer / exporter by using the same marks file on both sides. Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-6/+6
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-03fast-export: rename the signed tag mode 'ignore' to 'verbatim'Libravatar Johannes Schindelin1-2/+2
The name 'verbatim' describes much better what this mode does with signed tags. While at it, fix the documentation what it actually does. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-02Add 'git fast-export', the sister of 'git fast-import'Libravatar Johannes Schindelin1-0/+83
This program dumps (parts of) a git repository in the format that fast-import understands. For clarity's sake, it does not use the 'inline' method of specifying blobs in the commits, but builds the blobs before building the commits. Since signed tags' signatures will not necessarily be valid (think transformations after the export, or excluding revisions, changing the history), there are 4 modes to handle them: abort (default), ignore, warn and strip. The latter just turns the tags into unsigned ones. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>