summaryrefslogtreecommitdiff
path: root/Documentation/git-daemon.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-12-17git-daemon documentation: use {tilde}Libravatar Miklos Vajna1-2/+2
Use '{tilde}' instead of '~', becase the later does not appear in the manpage version, just in the HTML one. Noticed by gonzzor on IRC. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-24git-daemon: set REMOTE_ADDR to client addressLibravatar Joey Hess1-0/+9
This allows hooks like pre-receive to look at the client's IP address. Of course the IP address can't be used to get strong security; git-daemon isn't the right thing to use if you need that. However, basic IP address checking can be good enough in some situations. REMOTE_ADDR is the same environment variable used to communicate the client's address to CGI scripts. Signed-off-by: Joey Hess <joey@kitenet.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-17git-daemon: rewrite kindergarden, new option --max-connectionsLibravatar Stephen R. van den Berg1-2/+7
Get rid of the fixed array of children and make max-connections dynamic and configurable. Fix the killing code to actually kill the newest connections from duplicate IP-addresses. Avoid forking if too busy already. Signed-off-by: Stephen R. van den Berg <srb@cuci.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-20/+20
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-11/+11
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01git-daemon(1): don't assume git-daemon is in /usr/binLibravatar Jonathan Nieder1-5/+5
In the example inetd.conf lines in git-daemon(1), it was assumed that `git-daemon` resides in the user's /usr/bin. With this patch, we only assume `git` is in /usr/bin. The stronger assumption fails in the default installation nowadays. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-4/+8
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-19doc/git-daemon: s/uploadarchive/uploadarch/Libravatar Jeff King1-2/+2
The git-daemon upload-archive feature has always used the config directive 'daemon.uploadarch'; the documentation which came later seems to have just mistakenly used the wrong name. Noticed by lionel@over-blog.com. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-1/+1
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-17Clean up documentation that references deprecated 'git peek-remote'.Libravatar Johannes Sixt1-3/+3
Now that 'git peek-remote' is deprecated and only an alias for 'git ls-remote', it should not be referenced from other manual pages. This also removes the description of the --exec option, which is no longer present. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-09-01Documentation: minor AsciiDoc mark-up fixes.Libravatar Junio C Hamano1-8/+8
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-29git-daemon(1): assorted improvements.Libravatar Junio C Hamano1-2/+34
Jari Aalto noticed a handful places in git-daemon documentation that need to be improved. * --inetd makes --pid-file to be ignored, in addition to --user and --group * receive-pack service was not described at all. We should, if only to warn about the security implications of it. * There was no example of per repository configuration. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01--base-path-relaxed optionLibravatar Jens Axboe1-0/+6
I switched git.kernel.dk to --base-path a few minutes ago, to get rid of a /data/git postfix in the posted urls. But transitioning is tricky, since now all old paths will fail miserably. So I added this --base-path-relaxed option, that will make git-daemon try the absolute path without prefixing --base-path before giving up. With this in place and --base-path-relaxed added, both my new url of git://git.kernel.dk/linux-2.6-block.git and the old git://git.kernel.dk/data/git/linux-2.6-block.git work fine. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+0
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-24git-daemon documentation on enabling services.Libravatar Junio C Hamano1-2/+2
Noticed by Franck Bui-Huu. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-27Documentation: add git in /etc/services.Libravatar Christian Couder1-0/+7
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-27Documentation: add upload-archive service to git-daemon.Libravatar Christian Couder1-0/+5
This patch minimaly documents the upload-archive service, hoping that someone with better knowledge will improve upon. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-10-25Remove --syslog in git-daemon inetd documentation examples.Libravatar Christian Couder1-4/+2
It is useless because --inetd implies --syslog. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27Cleaned up git-daemon virtual hosting support.Libravatar Jon Loeliger1-6/+37
Standardized on lowercase hostnames from client. Added interpolation values for the IP address, port and canonical hostname of the server as it is contacted and named by the client and passed in via the extended args. Added --listen=host_or_ipaddr option suport. Renamed port variable as "listen_port" correspondingly as well. Documented mutual exclusivity of --inetd option with --user, --group, --listen and --port options. Added compat/inet_pton.c from Paul Vixie as needed. Small memory leaks need to be cleaned up still. Signed-off-by: Jon Loeliger <jdl@jdl.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-20Add virtualization support to git-daemonLibravatar Jon Loeliger1-0/+47
Signed-off-by: Jon Loeliger Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-07Revert "daemon: add upload-tar service."Libravatar Junio C Hamano1-6/+0
This reverts parts of commit 74c0cc2 and part of commit 355f541. Franck and Rene are working on a unified upload-archive which would supersede this when done, so better not to get in their way. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-27multi-service daemon: documentationLibravatar Junio C Hamano1-8/+39
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-22Added support for dropping privileges to git-daemon.Libravatar Tilman Sauerbeck1-1/+13
Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-27daemon: documentation for --reuseaddr, --detach and --pid-fileLibravatar Matthias Lederhofer1-1/+12
Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Documentation: Spelling fixesLibravatar Horst H. von Brand1-2/+2
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-09Remove trailing dot after short descriptionLibravatar Fredrik Kuivinen1-1/+1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-05daemon: extend user-relative path notation.Libravatar Junio C Hamano1-3/+12
Earlier, we made --base-path to automatically forbid user-relative paths, which was probably a mistake. This introduces --user-path (or --user-path=path) option to control the use of user-relative paths independently. The latter form of the option can be used to restrict accesses to a part of each user's home directory, similar to "public_html" some webservers supports. If we're invoked with --user-path=FOO option, then a URL of the form git://~USER/PATH/... resolves to the path HOME/FOO/PATH/..., where HOME is USER's home directory. [jc: This is much reworked by me so bugs are mine, but the original patch was done by Mark Wooding.] Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-07git-daemon --base-pathLibravatar Petr Baudis1-1/+10
Tommi Virtanen expressed a wish on #git to be able to use short and elegant git URLs by making git-daemon 'root' in a given directory. This patch implements this, causing git-daemon to interpret all paths relative to the given base path if any is given. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-05Wrap synopsis lines and use [verse] to keep formattingLibravatar Jonas Fonseca1-1/+2
In addition, also fixes a few synopses to be more consistent and a gitlink. Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-21daemon: further tweaks.Libravatar Junio C Hamano1-2/+2
- Do validation only on canonicalized paths - Run upload-pack with "." as repository argument Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-21git-daemon support for user-relative paths.Libravatar Andreas Ericsson1-2/+14
Dropped a fair amount of reundant code in favour of the library code in path.c Added option --strict-paths with documentation, with backwards compatibility for whitelist entries with symlinks. Everything that worked earlier still works insofar as I have remembered testing it. Signed-off-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-15git-daemon: --inetd implies --syslogLibravatar Andreas Ericsson1-1/+1
Otherwise nothing is logged anywhere, which is a Bad Thing. Signed-off-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-20Update git-daemon's documentation wrt. new optionsLibravatar Petr Baudis1-2/+20
New options --timeout, --init-timeout, --export-all and whitelist support were added to git-daemon, but noone bothered to also add the proper documentation. This patch aims to fix that. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-10Convert usage of GIT and Git into gitLibravatar Christian Meder1-1/+1
Convert usage of GIT and Git into git. Signed-off-by: Christian Meder <chris@absolutegiganten.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-24[PATCH] git-daemon --syslog to log through syslogLibravatar Petr Baudis1-1/+5
Well, this makes it even more clear that we need the packet reader and friends to use the daemon logging code. :/ Therefore, we at least indicate in the "Disconnect" log message if the child process exitted with an error code or not. Idea by Linus. Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-24[PATCH] Update git-daemon documentation wrt. the --verbose parameterLibravatar Petr Baudis1-1/+4
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-20[PATCH] Documentation: Update all files to use the new gitlink: macroLibravatar Sergey Vlasov1-1/+1
The replacement was performed automatically by these commands: perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \ README Documentation/*.txt perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \ README Documentation/*.txt Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-29[PATCH] Documentation for git-daemon.Libravatar A Large Angry SCM1-9/+17
Copy & paste source comments into documentation. Signed-off-by: <gitzilla@gmail.com> (cherry picked from 5d0a4efeff62cfa363437f91308453b5b9fd8cf5 commit)
2005-08-23Add placeholders for missing documents.Libravatar Junio C Hamano1-0/+38
The text does not say anything interesting, but at least the author list should reflect something close to reality. Signed-off-by: Junio C Hamano <junkio@cox.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 10:38:07 +0000