summaryrefslogtreecommitdiff
path: root/Documentation/git-cvsserver.txt
AgeCommit message (Collapse)AuthorFilesLines
2014-11-04Documentation: typofixesLibravatar Thomas Ackermann1-1/+1
In addition to fixing trivial and obvious typos, be careful about the following points: - Spell ASCII, URL and CRC in ALL CAPS; - Spell Linux as Capitalized; - Do not omit periods in "i.e." and "e.g.". Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-05Merge branch 'ta/doc-no-small-caps'Libravatar Junio C Hamano1-14/+14
Update documentation to change "GIT" which was a poor-man's small caps to "Git". The latter was the intended spelling. Also change "git" spelled in all-lowercase to "Git" when it refers to the system as the whole or the concept it embodies, as opposed to the command the end users would type. * ta/doc-no-small-caps: Documentation: StGit is the right spelling, not StGIT Documentation: describe the "repository" in repository-layout Documentation: add a description for 'gitfile' to glossary Documentation: do not use undefined terms git-dir and git-file Documentation: the name of the system is 'Git', not 'git' Documentation: avoid poor-man's small caps GIT
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-10/+10
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Documentation: avoid poor-man's small caps GITLibravatar Thomas Ackermann1-4/+4
In the earlier days, we used to spell the name of the system as GIT, to simulate as if it were typeset with capital G and IT in small caps. Later we stopped doing so at around 1.6.5 days. Let's stop doing so throughout the documentation. The name to refer to the whole system (and the concept it embodies) is "Git"; the command end-users type is "git". And document this in the coding guideline. Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-16cvsserver Documentation: new cvs ... -r supportLibravatar Matthew Ogilvie1-0/+37
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-26docs: stop using asciidoc no-inline-literalLibravatar Jeff King1-1/+1
In asciidoc 7, backticks like `foo` produced a typographic effect, but did not otherwise affect the syntax. In asciidoc 8, backticks introduce an "inline literal" inside which markup is not interpreted. To keep compatibility with existing documents, asciidoc 8 has a "no-inline-literal" attribute to keep the old behavior. We enabled this so that the documentation could be built on either version. It has been several years now, and asciidoc 7 is no longer in wide use. We can now decide whether or not we want inline literals on their own merits, which are: 1. The source is much easier to read when the literal contains punctuation. You can use `master~1` instead of `master{tilde}1`. 2. They are less error-prone. Because of point (1), we tend to make mistakes and forget the extra layer of quoting. This patch removes the no-inline-literal attribute from the Makefile and converts every use of backticks in the documentation to an inline literal (they must be cleaned up, or the example above would literally show "{tilde}" in the output). Problematic sites were found by grepping for '`.*[{\\]' and examined and fixed manually. The results were then verified by comparing the output of "html2text" on the set of generated html pages. Doing so revealed that in addition to making the source more readable, this patch fixes several formatting bugs: - HTML rendering used the ellipsis character instead of literal "..." in code examples (like "git log A...B") - some code examples used the right-arrow character instead of '->' because they failed to quote - api-config.txt did not quote tilde, and the resulting HTML contained a bogus snippet like: <tt><sub></tt> foo <tt></sub>bar</tt> which caused some parsers to choke and omit whole sections of the page. - git-commit.txt confused ``foo`` (backticks inside a literal) with ``foo'' (matched double-quotes) - mentions of `A U Thor <author@example.com>` used to erroneously auto-generate a mailto footnote for author@example.com - the description of --word-diff=plain incorrectly showed the output as "[-removed-] and {added}", not "{+added+}". - using "prime" notation like: commit `C` and its replacement `C'` confused asciidoc into thinking that everything between the first backtick and the final apostrophe were meant to be inside matched quotes - asciidoc got confused by the escaping of some of our asterisks. In particular, `credential.\*` and `credential.<url>.\*` properly escaped the asterisk in the first case, but literally passed through the backslash in the second case. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-26docs: make sure literal "->" isn't converted to arrowLibravatar Jeff King1-1/+1
Recent versions of asciidoc will treat "->" as a single-glyph arrow symbol, unless it is inside a literal code block. This is a problem if we are discussing literal output and want to show the ASCII characters. Our usage falls into three categories: 1. Inside a code block. These can be left as-is. 2. Discussing literal output or code, but inside a paragraph. This patch escapes these as "\->". 3. Using the arrow as a symbolic element, such as "use the Edit->Account Settings menu". In this case, the arrow symbol is preferable, so we leave it as-is. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-16/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-10-06Martin Langhoff has a new e-mail addressLibravatar Junio C Hamano1-2/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20Documentation: spelling fixesLibravatar Ville Skyttä1-2/+2
[jc: with wording changes from Jonathan Nieder] Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'eb/core-eol'Libravatar Junio C Hamano1-8/+5
* eb/core-eol: Add "core.eol" config variable Rename the "crlf" attribute "text" Add per-repository eol normalization Add tests for per-repository eol normalization Conflicts: Documentation/config.txt Makefile
2010-05-19git-cvsserver: document making a password without htpasswdLibravatar Ævar Arnfjörð Bjarmason1-0/+5
This perl snippet is useful for quickly making a password without htpasswd(1). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-19git-cvsserver: use a password file cvsserver pserverLibravatar Sam Vilain1-5/+16
If a git repository is shared via HTTP, the config file is typically visible. Use an external file instead. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-19git-cvsserver: authentication support for pserverLibravatar Ævar Arnfjörð Bjarmason1-4/+17
Allow git-cvsserver to use authentication over pserver mode. The pserver user/password database is stored in the config file for each repository. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Worriedly-Acked-by: Martin Langhoff <martin.langhoff@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-19Rename the "crlf" attribute "text"Libravatar Eyvind Bernhardsen1-8/+5
As discussed on the list, "crlf" is not an optimal name. Linus suggested "text", which is much better. Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge remote branch 'remotes/trast-doc/for-next'Libravatar Junio C Hamano1-3/+3
* remotes/trast-doc/for-next: Documentation: spell 'git cmd' without dash throughout Documentation: format full commands in typewriter font Documentation: warn prominently against merging with dirty trees Documentation/git-merge: reword references to "remote" and "pull" Conflicts: Documentation/config.txt Documentation/git-config.txt Documentation/git-merge.txt
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-2/+2
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2010-01-10Documentation: format full commands in typewriter fontLibravatar Thomas Rast1-1/+1
Use `code snippet` style instead of 'emphasis' for `git cmd ...` according to the following rules: * The SYNOPSIS sections are left untouched. * If the intent is that the user type the command exactly as given, it is `code`. If the user is only loosely referred to a command and/or option, it remains 'emphasised'. Signed-off-by: Thomas Rast <trast@student.ethz.ch>
2009-12-30CVS Server: Support reading base and roots from environmentLibravatar Phil Miller1-0/+15
The Gitosis single-account Git/ssh hosting system runs git commands through git-shell after confirming that the connecting user is authorized to access the requested repository. This works well for upload-pack and receive-pack, which take a repository argument through git-shell. This doesn't work so well for `cvs server', which is passed through literally, with no arguments. Allowing arguments risks sneaking in `--export-all', so that restriction should be maintained. Despite that, passing a repository root is necessary for per-user access control by the hosting software, and passing a base path improves usability without weakening security. Thus, git-cvsserver needs to come up with these values at runtime by some other means. Since git-shell preserves the environment for other purposes, the environment can carry these arguments as well. Thus, modify git-cvsserver to read $GIT_CVSSERVER_{BASE_PATH,ROOT} in the absence of equivalent command line arguments. Signed-off-by: Phil Miller <mille121@illinois.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-22cvsserver doc: database generally can not be reproduced consistentlyLibravatar Matthew Ogilvie1-4/+15
A regenerated git-cvsserver database is at risk of having different CVS revision numbers from an incrementally updated database. Mention this in the the documentation, and remove an erroneous statement to the contrary. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-18adapt git-cvsserver manpage to dash-free syntaxLibravatar Robert Schiele1-4/+4
Signed-off-by: Robert Schiele <rschiele@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05Merge branch 'qq/maint'Libravatar Junio C Hamano1-0/+3
* qq/maint: clone -q: honor "quiet" option over native transports. attribute documentation: keep EXAMPLE at end builtin-commit.c: Use 'git_config_string' to get 'commit.template' http.c: Use 'git_config_string' to clean up SSL config. diff.c: Use 'git_config_string' to get 'diff.external' convert.c: Use 'git_config_string' to get 'smudge' and 'clean' builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix' Documentation cvs: Clarify when a bare repository is needed Documentation: be precise about which date --pretty uses Conflicts: Documentation/gitattributes.txt
2008-07-05Documentation cvs: Clarify when a bare repository is neededLibravatar Matthew Ogilvie1-0/+3
New users sometimes import a project and then immediately try to use the imported repository as a central shared repository. This provides pointers about setting up a bare repository for that in the parts of the documentation dealing with CVS migration. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize nongit command names (if they are in teletype font)Libravatar Jonathan Nieder1-2/+2
Some manual pages use teletype font to set command names. We change them to use italics, instead. This creates a visual distinction between names of commands and command lines that can be typed at the command line. It is also more consistent with other man pages outside Git. In this patch, the commands named are non-git commands like bash. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-19/+19
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-22/+21
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-2/+5
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-21Documentation: Fix skipped section levelLibravatar Gustaf Hendeby1-1/+1
With xmlto 0.0.18 it seems to demand that no section levels are skipped. The commit 'implement gitcvs.usecrlfattr' (8a06a632976ead) one such skip, which here is removed by increasing the level of the offender. Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-16git-cvsserver: add ability to guess -kb from contentsLibravatar Matthew Ogilvie1-4/+10
If "gitcvs.allbinary" is set to "guess", then any file that has not been explicitly marked as binary or text using the "crlf" attribute and the "gitcvs.usecrlfattr" config will guess binary based on the contents of the file. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-16implement gitcvs.usecrlfattrLibravatar Matthew Ogilvie1-5/+21
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult the "crlf" for each file to determine if it should mark the file as binary (-kb). Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-16Merge branch 'maint-1.5.4' into maintLibravatar Junio C Hamano1-11/+17
* maint-1.5.4: git-bisect: make "start", "good" and "skip" succeed or fail atomically git-am: cope better with an empty Subject: line Ignore leading empty lines while summarizing merges bisect: squelch "fatal: ref HEAD not a symref" misleading message builtin-apply: Show a more descriptive error on failure when opening a patch Clarify documentation of git-cvsserver, particularly in relation to git-shell
2008-04-15Clarify documentation of git-cvsserver, particularly in relation to git-shellLibravatar Scott Collins1-11/+17
For SSH clients restricted to git-shell, CVS_SERVER does not have to be specified, because git-shell understands the default value of 'cvs' to mean git-cvsserver'. This makes it totally transparent to CVS users, but the instruction to set up CVS access for people with real shell access does not apply. Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc. Note that the .ssh/environment file is a good place to set these, and that the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d (setting CVSROOT) from cvs co -d (setting the name of the newly checked out directory). Removed an extra 'Example:' string. Signed-off-by: Scott Collins <scc@ScottCollins.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-30Allow git-cvsserver database table name prefix to be specified.Libravatar Josh Elsasser1-0/+5
Adds a gitcvs.dbtablenameprefix config variable, the contents of which are prepended to any database tables names used by git-cvsserver. The same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and any non-alphabetic characters are replaced with underscores. A typo found in contrib/completion/git-completion.bash is also fixed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-30Documentation/git-cvsserver: Fix typoLibravatar Jean-Luc Herren1-1/+1
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-29fix doc typosLibravatar Jim Meyering1-2/+2
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24Documentation: For consistency, use CVS instead of cvs.Libravatar Brian Hetro1-1/+1
When not referring to the cvs command, CVS makes more sense. Signed-off-by: Brian Hetro <whee@smaertness.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-15cvsserver: Actually implement --export-allLibravatar Frank Lichtenheld1-1/+2
Embarrassing bug number two in my options patch. Also enforce that --export-all is only ever used together with an explicit whitelist. Otherwise people might export every git repository on the whole system without realising. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08cvsserver: Add some useful commandline optionsLibravatar Frank Lichtenheld1-0/+42
Make git-cvsserver understand some options inspired by git-daemon, namely --base-path, --export-all, --strict-paths. Also allow the caller to specify a whitelist of allowed directories, again similar to git-daemon. While already adding option parsing also support the common --help and --version options. Rationale: While the gitcvs.enabled configuration option already offers means to limit git-cvsserver access to a repository, there are some use cases where other methods of access control prove to be more useful. E.g. if setting up a pserver for a collection of public repositories one might want limit the exported repositories to exactly the directory this collection is located whithout having to worry about other repositories that might lie around with the configuration variable set (never trust your users ;) Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-29cvsserver: Fix some typos in asciidoc documentationLibravatar Frank Lichtenheld1-2/+2
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29cvsserver: Note that CVS_SERVER can also be specified as method variableLibravatar Frank Lichtenheld1-1/+11
Reasonably new versions of the cvs CLI client allow one to specifiy CVS_SERVER as a method variable directly in CVSROOT. This is way more convinient than using an environment variable since it gets saved in CVS/Root. Since I only discovered this by accident I guess there might be others out there that learnt CVS on the 1.11 series (or even earlier) and profit from such a note about cvs improvements in the last couple years. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29cvsserver: Correct inetd.conf example in asciidoc documentationLibravatar Frank Lichtenheld1-3/+5
While the given example worked, it made us look rather incompetent. Give the correct reason why one needs the more complex syntax and change the example to reflect that. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-17Merge branch 'fl/cvsserver'Libravatar Junio C Hamano1-3/+104
* fl/cvsserver: config.txt: Add gitcvs.db* variables cvsserver: Document the GIT branches -> CVS modules mapping more prominently cvsserver: Reword documentation on necessity of write access cvsserver: Allow to "add" a removed file cvsserver: Add asciidoc documentation for new database backend configuration cvsserver: Corrections to the database backend configuration cvsserver: Use DBI->table_info instead of DBI->tables cvsserver: Abort if connect to database fails cvsserver: Make the database backend configurable cvsserver: Allow to override the configuration per access method cvsserver: Handle three part keys in git config correctly cvsserver: Introduce new state variable 'method' Conflicts: Documentation/config.txt
2007-04-12cvsserver: Document the GIT branches -> CVS modules mapping more prominentlyLibravatar Frank Lichtenheld1-0/+4
Add a note about the branches -> modules mapping to LIMITATIONS because I really think it should be noted there and not just at the end of the installation step-by-step HOWTO. I used "git branches" there and changed "heads" to "branches" in my section about database configuration. I'm reluctant to replace all occourences of "head" with "branch" though because you always have to say "git branch" because CVS also has the concept of branches. You can say "head" though, because there is no such concept in CVS. In all the existing occourences of head other than the one I changed I think "head" flows better in the text. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-12cvsserver: Reword documentation on necessity of write accessLibravatar Frank Lichtenheld1-3/+9
Reworded the section about git-cvsserver needing to update the database. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-08cvsserver: Add asciidoc documentation for new database backend configurationLibravatar Frank Lichtenheld1-4/+83
Documents the new configuration variables and the variable substitution mechanism. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07cvsserver: small corrections to asciidoc documentationLibravatar Frank Lichtenheld1-4/+4
Fix a typo: s/Not/Note/ Some formating fixes: Use ` ` syntax for all filenames and ' ' syntax for all commandline switches. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-31cvsserver: Don't lie about binary mode in asciidoc documentationLibravatar Frank Lichtenheld1-3/+5
The git-cvsserver documentation claims that the server will set -k modes if appropriate which is not really the case. On the other hand the available gitcvs.allbinary variable is not documented at all. Fix both these issues by rewording the related paragraph. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>