summaryrefslogtreecommitdiff
path: root/Documentation/git-cvsserver.txt
AgeCommit message (Collapse)AuthorFilesLines
2008-06-08Docs: Use "-l::\n--long\n" format in OPTIONS sectionsLibravatar Stephan Beyer1-2/+5
The OPTIONS section of a documentation file contains a list of the options a git command accepts. Currently there are several variants to describe the case that different options (almost) do the same in the OPTIONS section. Some are: -f, --foo:: -f|--foo:: -f | --foo:: But AsciiDoc has the special form: -f:: --foo:: This patch applies this form to the documentation of the whole git suite, and removes useless em-dash prevention, so \--foo becomes --foo. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-21Documentation: Fix skipped section levelLibravatar Gustaf Hendeby1-1/+1
With xmlto 0.0.18 it seems to demand that no section levels are skipped. The commit 'implement gitcvs.usecrlfattr' (8a06a632976ead) one such skip, which here is removed by increasing the level of the offender. Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-16git-cvsserver: add ability to guess -kb from contentsLibravatar Matthew Ogilvie1-4/+10
If "gitcvs.allbinary" is set to "guess", then any file that has not been explicitly marked as binary or text using the "crlf" attribute and the "gitcvs.usecrlfattr" config will guess binary based on the contents of the file. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-16implement gitcvs.usecrlfattrLibravatar Matthew Ogilvie1-5/+21
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult the "crlf" for each file to determine if it should mark the file as binary (-kb). Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-16Merge branch 'maint-1.5.4' into maintLibravatar Junio C Hamano1-11/+17
* maint-1.5.4: git-bisect: make "start", "good" and "skip" succeed or fail atomically git-am: cope better with an empty Subject: line Ignore leading empty lines while summarizing merges bisect: squelch "fatal: ref HEAD not a symref" misleading message builtin-apply: Show a more descriptive error on failure when opening a patch Clarify documentation of git-cvsserver, particularly in relation to git-shell
2008-04-15Clarify documentation of git-cvsserver, particularly in relation to git-shellLibravatar Scott Collins1-11/+17
For SSH clients restricted to git-shell, CVS_SERVER does not have to be specified, because git-shell understands the default value of 'cvs' to mean git-cvsserver'. This makes it totally transparent to CVS users, but the instruction to set up CVS access for people with real shell access does not apply. Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc. Note that the .ssh/environment file is a good place to set these, and that the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d (setting CVSROOT) from cvs co -d (setting the name of the newly checked out directory). Removed an extra 'Example:' string. Signed-off-by: Scott Collins <scc@ScottCollins.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-30Allow git-cvsserver database table name prefix to be specified.Libravatar Josh Elsasser1-0/+5
Adds a gitcvs.dbtablenameprefix config variable, the contents of which are prepended to any database tables names used by git-cvsserver. The same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and any non-alphabetic characters are replaced with underscores. A typo found in contrib/completion/git-completion.bash is also fixed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-30Documentation/git-cvsserver: Fix typoLibravatar Jean-Luc Herren1-1/+1
Signed-off-by: Jean-Luc Herren <jlh@gmx.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-29fix doc typosLibravatar Jim Meyering1-2/+2
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-24Documentation: For consistency, use CVS instead of cvs.Libravatar Brian Hetro1-1/+1
When not referring to the cvs command, CVS makes more sense. Signed-off-by: Brian Hetro <whee@smaertness.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-15cvsserver: Actually implement --export-allLibravatar Frank Lichtenheld1-1/+2
Embarrassing bug number two in my options patch. Also enforce that --export-all is only ever used together with an explicit whitelist. Otherwise people might export every git repository on the whole system without realising. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-08cvsserver: Add some useful commandline optionsLibravatar Frank Lichtenheld1-0/+42
Make git-cvsserver understand some options inspired by git-daemon, namely --base-path, --export-all, --strict-paths. Also allow the caller to specify a whitelist of allowed directories, again similar to git-daemon. While already adding option parsing also support the common --help and --version options. Rationale: While the gitcvs.enabled configuration option already offers means to limit git-cvsserver access to a repository, there are some use cases where other methods of access control prove to be more useful. E.g. if setting up a pserver for a collection of public repositories one might want limit the exported repositories to exactly the directory this collection is located whithout having to worry about other repositories that might lie around with the configuration variable set (never trust your users ;) Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-29cvsserver: Fix some typos in asciidoc documentationLibravatar Frank Lichtenheld1-2/+2
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29cvsserver: Note that CVS_SERVER can also be specified as method variableLibravatar Frank Lichtenheld1-1/+11
Reasonably new versions of the cvs CLI client allow one to specifiy CVS_SERVER as a method variable directly in CVSROOT. This is way more convinient than using an environment variable since it gets saved in CVS/Root. Since I only discovered this by accident I guess there might be others out there that learnt CVS on the 1.11 series (or even earlier) and profit from such a note about cvs improvements in the last couple years. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-29cvsserver: Correct inetd.conf example in asciidoc documentationLibravatar Frank Lichtenheld1-3/+5
While the given example worked, it made us look rather incompetent. Give the correct reason why one needs the more complex syntax and change the example to reflect that. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-17Merge branch 'fl/cvsserver'Libravatar Junio C Hamano1-3/+104
* fl/cvsserver: config.txt: Add gitcvs.db* variables cvsserver: Document the GIT branches -> CVS modules mapping more prominently cvsserver: Reword documentation on necessity of write access cvsserver: Allow to "add" a removed file cvsserver: Add asciidoc documentation for new database backend configuration cvsserver: Corrections to the database backend configuration cvsserver: Use DBI->table_info instead of DBI->tables cvsserver: Abort if connect to database fails cvsserver: Make the database backend configurable cvsserver: Allow to override the configuration per access method cvsserver: Handle three part keys in git config correctly cvsserver: Introduce new state variable 'method' Conflicts: Documentation/config.txt
2007-04-12cvsserver: Document the GIT branches -> CVS modules mapping more prominentlyLibravatar Frank Lichtenheld1-0/+4
Add a note about the branches -> modules mapping to LIMITATIONS because I really think it should be noted there and not just at the end of the installation step-by-step HOWTO. I used "git branches" there and changed "heads" to "branches" in my section about database configuration. I'm reluctant to replace all occourences of "head" with "branch" though because you always have to say "git branch" because CVS also has the concept of branches. You can say "head" though, because there is no such concept in CVS. In all the existing occourences of head other than the one I changed I think "head" flows better in the text. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-12cvsserver: Reword documentation on necessity of write accessLibravatar Frank Lichtenheld1-3/+9
Reworded the section about git-cvsserver needing to update the database. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-08cvsserver: Add asciidoc documentation for new database backend configurationLibravatar Frank Lichtenheld1-4/+83
Documents the new configuration variables and the variable substitution mechanism. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-07cvsserver: small corrections to asciidoc documentationLibravatar Frank Lichtenheld1-4/+4
Fix a typo: s/Not/Note/ Some formating fixes: Use ` ` syntax for all filenames and ' ' syntax for all commandline switches. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-31cvsserver: Don't lie about binary mode in asciidoc documentationLibravatar Frank Lichtenheld1-3/+5
The git-cvsserver documentation claims that the server will set -k modes if appropriate which is not really the case. On the other hand the available gitcvs.allbinary variable is not documented at all. Fix both these issues by rewording the related paragraph. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-22cvsserver: Allow to override the configuration per access methodLibravatar Frank Lichtenheld1-0/+12
Allow to override the gitcvs.enabled and gitcvs.logfile configuration variables for each access method (i.e. "ext" or "pserver") in the form gitcvs.<method>.<var> Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-03-13cvsserver: asciidoc formatting changesLibravatar Frank Lichtenheld1-8/+11
Format some lists really as lists. Improves both html and man output. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-07git-cvsserver asciidoc formatting tweaksLibravatar Francis Daly1-18/+31
No content change here. html output improved. man output changed. Signed-off-by: Francis Daly <francis@daoine.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-03Documentation: Spelling fixesLibravatar Horst H. von Brand1-1/+1
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-05cvsserver: updated documentationLibravatar Martin Langhoff1-25/+60
... and stripped trailing whitespace to appease the Gods... Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-01cvsserver: add notes on how to get a checkout under EclipseLibravatar Martin Langhoff1-0/+24
2006-02-22Introducing git-cvsserver -- a CVS emulator for git.Libravatar Martin Langhoff1-0/+89
git-cvsserver is highly functional. However, not all methods are implemented, and for those methods that are implemented, not all switches are implemented. All the common read operations are implemented, and add/remove/commit are supported. Testing has been done using both the CLI CVS client, and the Eclipse CVS plugin. Most functionality works fine with both of these clients. Currently git-cvsserver only works over SSH connections, see the Documentation for more details on how to configure your client. It does not support pserver for anonymous access but it should not be hard to implement. Anonymous access will need tighter input validation. In our very informal tests, it seems to be significantly faster than a real CVS server. This utility depends on a version of git-cvsannotate that supports -S and on DBD::SQLite. Licensed under GPLv2. Copyright The Open University UK. Authors: Martyn Smith <martyn@catalyst.net.nz> Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>