| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a user queries config values with --show-origin, often it's
difficult to determine what the actual "scope" (local, global, etc.) of
a given value is based on just the origin file.
Teach 'git config' the '--show-scope' option to print the scope of all
displayed config values. Note that we should never see anything of
"submodule" scope as that is only ever used by submodule-config.c when
parsing the '.gitmodules' file.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The indented lines in these example config-file listings are indented
differently by AsciiDoc and Asciidoctor.
Fix this by marking the example config-files as code listings by
wrapping them in "----". Because this gives us some extra indentation,
we can remove the one that we have been carrying explicitly. That is,
drop the first tab of indentation on each line.
With AsciiDoc, this results in identical rendering before and after this
commit. Asciidoctor now renders this the same as AsciiDoc does.
git-config.txt pretty consistently uses twelve dashes rather than the
minimum four to spell "----". Let's stick to the file-local convention
there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation mark-up fixes.
* ma/asciidoctor-fixes-more:
Documentation: turn middle-of-line tabs into spaces
git-svn.txt: drop escaping '\' that ends up being rendered
git.txt: remove empty line before list continuation
config/fsck.txt: avoid starting line with dash
config/diff.txt: drop spurious backtick
|
|
Even though the newer "--type=color" option to "git config" is meant
to be upward compatible with the traditional "--get-color" option,
unlike the latter, its output is not an incomplete line that lack
the LF at the end. That makes it consistent with output of other
types like "git config --type=bool".
Document it, as it sometimes surprises unsuspecting users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tabs happen to appear in columns where they don't stand out too
much, so the diff here is non-obvious. Some of these are rendered
differently by AsciiDoc and Asciidoctor (although the difference might
be invisible!), which is how I found a few of them. The remainder were
found using `git grep "[a-zA-Z.,)]$TAB[a-zA-Z]"`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than saying "(see: above)", drop the colon. Also drop the comma
before this note.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`, 2018-04-18) we have a more modern way of spelling
`--bool`.
Update all instances except those that explicitly document the
"historical options" in git-config.txt. The other old-style
type-specifiers already seem to be gone except for in that list of
historical options.
Tweak the grammar a little in config.txt while we are there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
|
|
The bug was noticed when writing the previous patch; a fix for this bug
is not easy though: If we choose to ignore the case of the subsection
(and revert most of the code of the previous patch, just keeping
s/strncasecmp/strcmp/), then we'd introduce new sections using the
new syntax, such that
--------
[section.subsection]
key = value1
--------
git config section.Subsection.key value2
would result in
--------
[section.subsection]
key = value1
[section.Subsection]
key = value2
--------
which is even more confusing. A proper fix would replace the first
occurrence of 'key'. As the syntax is deprecated, let's prefer to not
spend time on fixing the behavior and just document it instead.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of this commit, the canonical way to retreive an ANSI-compatible
color escape sequence from a configuration file is with the
`--get-color` action.
This is to allow Git to "fall back" on a default value for the color
should the given section not exist in the specified configuration(s).
With the addition of `--default`, this is no longer needed since:
$ git config --default red --type=color core.section
will be have exactly as:
$ git config --get-color core.section red
For consistency, let's introduce `--type=color` and encourage its use
with `--default` together over `--get-color` alone.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For some use cases, callers of the `git-config(1)` builtin would like to
fallback to default values when the variable asked for does not exist.
In addition, users would like to use existing type specifiers to ensure
that values are parsed correctly when they do exist in the
configuration.
For example, to fetch a value without a type specifier and fallback to
`$fallback`, the following is required:
$ git config core.foo || echo "$fallback"
This is fine for most values, but can be tricky for difficult-to-express
`$fallback`'s, like ANSI color codes.
This motivates `--get-color`, which is a one-off exception to the normal
type specifier rules wherein a user specifies both the configuration
variable and an optional fallback. Both are formatted according to their
type specifier, which eases the burden on the user to ensure that values
are correctly formatted.
This commit (and those following it in this series) aim to eventually
replace `--get-color` with a consistent alternative. By introducing
`--default`, we allow the `--get-color` action to be promoted to a
`--type=color` type specifier, retaining the "fallback" behavior via the
`--default` flag introduced in this commit.
For example, we aim to replace:
$ git config --get-color variable [default] [...]
with:
$ git config --default default --type=color variable [...]
Values filled by `--default` behave exactly as if they were present in
the affected configuration file; they will be parsed by type specifiers
without the knowledge that they are not themselves present in the
configuration.
Specifically, this means that the following will work:
$ git config --int --default 1M does.not.exist
1048576
In subsequent commits, we will offer `--type=color`, which (in
conjunction with `--default`) will be sufficient to replace
`--get-color`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git config` has long allowed the ability for callers to provide a 'type
specifier', which instructs `git config` to (1) ensure that incoming
values can be interpreted as that type, and (2) that outgoing values are
canonicalized under that type.
In another series, we propose to extend this functionality with
`--type=color` and `--default` to replace `--get-color`.
However, we traditionally use `--color` to mean "colorize this output",
instead of "this value should be treated as a color".
Currently, `git config` does not support this kind of colorization, but
we should be careful to avoid squatting on this option too soon, so that
`git config` can support `--color` (in the traditional sense) in the
future, if that is desired.
In this patch, we support `--type=<int|bool|bool-or-int|...>` in
addition to `--int`, `--bool`, and etc. This allows the aforementioned
upcoming patch to support querying a color value with a default via
`--type=color --default=...`, without squandering `--color`.
We retain the historic behavior of complaining when multiple,
legacy-style `--<type>` flags are given, as well as extend this to
conflicting new-style `--type=<type>` flags. `--int --type=int` (and its
commutative pair) does not complain, but `--bool --type=int` (and its
commutative pair) does.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.config`
at all when we are not listing or getting configuration. This change
will help with listing large configurations, but will not hurt users of
`git config --edit` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.config` when we are listing or "get"ing config.
We have several getters and some are guaranteed to give at most one line
of output. Paging all getters including those could be convenient from a
documentation point-of-view. The downside would be that a misconfigured
or not so modern pager might wait for user interaction before
terminating. Let's instead respect the config for precisely those
getters which may produce more than one line of output.
`--get-urlmatch` may or may not produce multiple lines of output,
depending on the exact usage. Let's not try to recognize the two modes,
but instead make `--get-urlmatch` always respect the config. Analyzing
the detailed usage might be trivial enough here, but could establish a
precedent that we will never be able to enforce throughout the codebase
and that will just open a can of worms.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git config foo.bar bar` and `git config --get foo.bar`
respects `pager.config`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --expiry-date as a data-type for config files when
'git config --get' is used. This will return any relative
or fixed dates from config files as timestamps.
This is useful for scripts (e.g. gc.reflogexpire) that work
with timestamps so that '2.weeks' can be converted to a format
acceptable by those scripts/functions.
Following the convention of git_config_pathname(), move
the helper function required for this feature from
builtin/reflog.c to builtin/config.c where other similar
functions exist (e.g. for --bool or --path), and match
the order of parameters with other functions (i.e. output
pointer as first parameter).
Signed-off-by: Haaris Mehmood <hsed@unimetic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the word "bla" to "section.variable"; "bla" is a placeholder
for a variable name but it wasn't clear for everyone.
While we're here, also reformat this sample command line to use
monospace instead of italics, to better match the rest of the file.
Use a space instead of a dash in "git config", as is common in the
rest of Git's documentation.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: MOY Matthieu <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git -c var[=val] cmd" facility to append a configuration
variable definition at the end of the search order was described in
git(1) manual page, but not in git-config(1), which was more likely
place for people to look for when they ask "can I make a one-shot
override, and if so how?"
* dg/document-git-c-in-git-config-doc:
doc: mention `git -c` in git-config(1)
|
|
Signed-off-by: David Glasser <glasser@davidglasser.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We previously reformatted '--option' to `--option`. This patch reformats
'--option <arg>' to `--option <arg>`. Obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]* <[^>]*>)'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similarly to the previous commit, use backquotes instead of
forward-quotes, for long options.
This was obtained with:
perl -pi -e "s/'(--[a-z][a-z=<>-]*)'/\`\$1\`/g" *.txt
and manual tweak to remove false positive in ascii-art (o'--o'--o' to
describe rewritten history).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wrap with backticks (monospaced font) unwrapped or single-quotes wrapped
(italic type) environment variables which are followed by the word
"environment". It was obtained with:
perl -pi -e "s/\'?(\\\$?[0-9A-Z\_]+)\'?(?= environment ?)/\`\1\`/g" *.txt
One of the main purposes is to stick to the CodingGuidelines as possible so
that people writting new documentation by mimicking the existing are more likely
to have it right (even if they didn't read the CodingGuidelines).
Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
|
|
--get does not fail if a key is multi-valued, it returns the last value
as described in its documentation. Clarify the description of --get-all
to avoid implying that --get does fail in this case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using a numbered list is confusing because the exit codes are not listed
in order so the numbers at the start of each line do not match the exit
codes described by the following text. Switch to a bulleted list so
that the only number appearing on each line is the exit code described.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --get, --get-all and --get-regexp options to git-config exit with
status 1 if the key is not found but --get-urlmatch succeeds in this
case.
Change --get-urlmatch to behave in the same way as the other --get*
options so that all four are consistent. --get-color is a special case
because it accepts a default value to return and so should not return an
error if the key is not found.
Also clarify this behaviour in the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
|
|
* jk/config-include:
git-config: better document default behavior for `--include`
|
|
If config values are queried using 'git config' (e.g. via --get,
--get-all, --get-regexp, or --list flag) then it is sometimes hard to
find the configuration file where the values were defined.
Teach 'git config' the '--show-origin' option to print the source
configuration file for every printed value.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As described in the commit message of 9b25a0b (config: add
include directive, 2012-02-06), the `--include` option is
only on by default in some cases. But our documentation
described it as just "defaults to on", which doesn't tell
the whole story.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
other minor grammatical issues
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
|
|
Using the same urlmatch_config_entry() infrastructure, add a new
mode "--get-urlmatch" to the "git config" command, to learn values
for the "virtual" two-level variables customized for the specific
URL.
git config [--<type>] --get-urlmatch <section>[.<key>] <url>
With <section>.<key> fully specified, the configuration data for
<section>.<urlpattern>.<key> for <urlpattern> that best matches the
given <url> is sought (and if not found, <section>.<key> is used)
and reported. For example, with this configuration:
[http]
sslVerify
[http "https://weak.example.com"]
cookieFile = /tmp/cookie.txt
sslVerify = false
You would get
$ git config --bool --get-urlmatch http.sslVerify https://good.example.com
true
$ git config --bool --get-urlmatch http.sslVerify https://weak.example.com
false
With only <section> specified, you can get a list of all variables
in the section with their values that apply to the given URL. E.g
$ git config --get-urlmatch http https://weak.example.com
http.cookiefile /tmp/cookie.txt
http.sslverify false
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rr/maint-tilde-markup-in-doc:
config doc: quote paths, fixing tilde-interpretation
|
|
The --global section of git-config(1) currently reads like:
For writing options: write to global /.gitconfig file rather than the
^
start tilde
repository .git/config, write to $XDG_CONFIG_HOME/git/config file if
this file exists and the/.gitconfig file doesn’t.
^
end tilde
Instead of tilde (~) being interpreted literally, asciidoc subscripts
the text between the two tildes. To fix this problem, use backticks (`)
to quote all the paths in the file uniformly, just like config.txt does.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow configuration data to be read from in-tree blob objects,
which would help working in a bare repository and submodule
updates.
* hv/config-from-blob:
do not die when error in config parsing of buf occurs
teach config --blob option to parse config from database
config: make parsing stack struct independent from actual data source
config: drop cf validity check in get_next_char()
config: factor out config file stack management
|
|
* nk/config-local-doc:
config: Add description of --local option
|
|
* jk/maint-config-multi-order:
git-config(1): clarify precedence of multiple values
|
|
This can be used to read configuration values directly from git's
database. For example it is useful for reading to be checked out
.gitmodules files directly from the database.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to clarify which value is used when there are multiple values
defined for a key, re-order the list of file locations so that it runs
from least specific to most specific. Then add a paragraph which simply
says that the last value will be used.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Update draft release notes to 1.8.3.3
git-config: update doc for --get with multiple values
|
|
* maint-1.8.2:
git-config: update doc for --get with multiple values
|
|
Since commit 00b347d (git-config: do not complain about duplicate
entries, 2012-10-23), "git config --get" does not exit with an error if
there are multiple values for the specified key but instead returns the
last value. Update the documentation to reflect this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nk/config-local-doc:
config: Add description of --local option
|
|
It was missed in the option list while mentioned from the general
description. Add it for completeness.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
White-spaces, missing braces, standardize --[no-]foo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
|
Matthew Rogers
Martin Ågren
Junio C Hamano
Jeff King
Nguyễn Thái Ngọc Duy
Stefan Beller
Taylor Blau
Haaris Mehmood
Nathan Payre
David Glasser
Matthieu Moy
Tom Russello
John Keeping
Lars Schneider
SZEDER Gábor
Jason St. John
Ramkumar Ramachandra
Heiko Voigt
Namhyung Kim
Felipe Contreras