| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce a configuration variable to specify a default value for the
recently-introduce '--max-new-filters' option of 'git commit-graph
write'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a command-line flag to specify the maximum number of new Bloom
filters that a 'git commit-graph write' is willing to compute from
scratch.
Prior to this patch, a commit-graph write with '--changed-paths' would
compute Bloom filters for all selected commits which haven't already
been computed (i.e., by a previous commit-graph write with '--split'
such that a roll-up or replacement is performed).
This behavior can cause prohibitively-long commit-graph writes for a
variety of reasons:
* There may be lots of filters whose diffs take a long time to
generate (for example, they have close to the maximum number of
changes, diffing itself takes a long time, etc).
* Old-style commit-graphs (which encode filters with too many entries
as not having been computed at all) cause us to waste time
recomputing filters that appear to have not been computed only to
discover that they are too-large.
This can make the upper-bound of the time it takes for 'git commit-graph
write --changed-paths' to be rather unpredictable.
To make this command behave more predictably, introduce
'--max-new-filters=<n>' to allow computing at most '<n>' Bloom filters
from scratch. This lets "computing" already-known filters proceed
quickly, while bounding the number of slow tasks that Git is willing to
do.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
|
|
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clean-up the commit-graph codepath.
* tb/commit-graph-no-check-oids:
commit-graph: drop COMMIT_GRAPH_WRITE_CHECK_OIDS flag
t5318: reorder test below 'graph_read_expect'
commit-graph.c: simplify 'fill_oids_from_commits'
builtin/commit-graph.c: dereference tags in builtin
builtin/commit-graph.c: extract 'read_one_commit()'
commit-graph.c: peel refs in 'add_ref_to_set'
commit-graph.c: show progress of finding reachable commits
commit-graph.c: extract 'refs_cb_data'
|
|
The first list item follows immediately on the paragraph where we
introduce the list. This makes the "*" render literally as part of one
huge paragraph. (With AsciiDoc, everything is fine after that, but with
Asciidoctor, we get some minor follow-on errors.) Add an empty line --
with a list continuation ("+") -- to make the first list item render ok.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's easy to mix up the possessive "its" and "it's" ("it is"). Correct
an instance of this.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 7c5c9b9c57 (commit-graph: error out on invalid commit oids in
'write --stdin-commits', 2019-08-05), the commit-graph builtin dies on
receiving non-commit OIDs as input to '--stdin-commits'.
This behavior can be cumbersome to work around in, say, the case of
piping 'git for-each-ref' to 'git commit-graph write --stdin-commits' if
the caller does not want to cull out non-commits themselves. In this
situation, it would be ideal if 'git commit-graph write' wrote the graph
containing the inputs that did pertain to commits, and silently ignored
the remainder of the input.
Some options have been proposed to the effect of '--[no-]check-oids'
which would allow callers to have the commit-graph builtin do just that.
After some discussion, it is difficult to imagine a caller who wouldn't
want to pass '--no-check-oids', suggesting that we should get rid of the
behavior of complaining about non-commit inputs altogether.
If callers do wish to retain this behavior, they can easily work around
this change by doing the following:
git for-each-ref --format='%(objectname) %(objecttype) %(*objecttype)' |
awk '
!/commit/ { print "not-a-commit:"$1 }
/commit/ { print $1 }
' |
git commit-graph write --stdin-commits
To make it so that valid OIDs that refer to non-existent objects are
indeed an error after loosening the error handling, perform an extra
lookup to make sure that object indeed exists before sending it to the
commit-graph internals.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
|
|
This reverts commit 7a9ce0269bc0f4ef230f930b3910b70ac3142552,
which has not yet gained consensus.
|
|
When operating on a stream of commit OIDs on stdin, 'git commit-graph
write' checks that each OID refers to an object that is indeed a commit.
This is convenient to make sure that the given input is well-formed, but
can sometimes be undesirable.
For example, server operators may wish to feed the refnames that were
updated during a push to 'git commit-graph write --input=stdin-commits',
and silently discard refs that don't point at commits. This can be done
by combing the output of 'git for-each-ref' with '--format
%(*objecttype)', but this requires opening up a potentially large number
of objects. Instead, it is more convenient to feed the updated refs to
the commit-graph machinery, and let it throw out refs that don't point
to commits.
Introduce '--[no-]check-oids' to make such a behavior possible. With
'--check-oids' (the default behavior to retain backwards compatibility),
'git commit-graph write' will barf on a non-commit line in its input.
With 'no-check-oids', such lines will be silently ignored, making the
above possible by specifying this option.
No matter which is supplied, 'git commit-graph write' retains the
behavior from the previous commit of rejecting non-OID inputs like
"HEAD" and "refs/heads/foo" as before.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using split commit-graphs, it is sometimes useful to completely
replace the commit-graph chain with a new base.
For example, consider a scenario in which a repository builds a new
commit-graph incremental for each push. Occasionally (say, after some
fixed number of pushes), they may wish to rebuild the commit-graph chain
with all reachable commits.
They can do so with
$ git commit-graph write --reachable
but this removes the chain entirely and replaces it with a single
commit-graph in 'objects/info/commit-graph'. Unfortunately, this means
that the next push will have to move this commit-graph into the first
layer of a new chain, and then write its new commits on top.
Avoid such copying entirely by allowing the caller to specify that they
wish to replace the entirety of their commit-graph chain, while also
specifying that the new commit-graph should become the basis of a fresh,
length-one chain.
This addresses the above situation by making it possible for the caller
to instead write:
$ git commit-graph write --reachable --split=replace
which writes a new length-one chain to 'objects/info/commit-graphs',
making the commit-graph incremental generated by the subsequent push
relatively cheap by avoiding the aforementioned copy.
In order to do this, remove an assumption in 'write_commit_graph_file'
that chains are always at least two incrementals long.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, we laid the groundwork for supporting different
splitting strategies. In this commit, we introduce the first splitting
strategy: 'no-merge'.
Passing '--split=no-merge' is useful for callers which wish to write a
new incremental commit-graph, but do not want to spend effort condensing
the incremental chain [1]. Previously, this was possible by passing
'--size-multiple=0', but this no longer the case following 63020f175f
(commit-graph: prefer default size_mult when given zero, 2020-01-02).
When '--split=no-merge' is given, the commit-graph machinery will never
condense an existing chain, and it will always write a new incremental.
[1]: This might occur when, for example, a server administrator running
some program after each push may want to ensure that each job runs
proportional in time to the size of the push, and does not "jump" when
the commit-graph machinery decides to trigger a merge.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With '--split', the commit-graph machinery writes new commits in another
incremental commit-graph which is part of the existing chain, and
optionally decides to condense the chain into a single commit-graph.
This is done to ensure that the asymptotic behavior of looking up a
commit in an incremental chain is not dominated by the number of
incrementals in that chain. It can be controlled by the '--max-commits'
and '--size-multiple' options.
In the next two commits, we will introduce additional splitting
strategies that can exert additional control over:
- when a split commit-graph is and isn't written, and
- when the existing commit-graph chain is discarded completely and
replaced with another graph
To prepare for this, make '--split' take an optional strategy (as in
'--split[=<strategy>]'), and add a new enum to describe which strategy
is being used. For now, no strategies are given, and the only enumerated
value is 'COMMIT_GRAPH_SPLIT_UNSPECIFIED', indicating the absence of a
strategy.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --changed-paths option to git commit-graph write. This option will
allow users to compute information about the paths that have changed
between a commit and its first parent, and write it into the commit graph
file. If the option is passed to the write subcommand we set the
COMMIT_GRAPH_WRITE_BLOOM_FILTERS flag and pass it down to the
commit-graph logic.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are lots of places in 'commit-graph.h' where a function either has
(or almost has) a full 'struct object_directory *', accesses '->path',
and then throws away the rest of the struct.
This can cause headaches when comparing the locations of object
directories across alternates (e.g., in the case of deciding if two
commit-graph layers can be merged). These paths are normalized with
'normalize_path_copy()' which mitigates some comparison issues, but not
all [1].
Replace usage of 'char *object_dir' with 'odb->path' by storing a
'struct object_directory *' in the 'write_commit_graph_context'
structure. This is an intermediate step towards getting rid of all path
normalization in 'commit-graph.c'.
Resolving a user-provided '--object-dir' argument now requires that we
compare it to the known alternates for equality. Prior to this patch,
an unknown '--object-dir' argument would silently exit with status zero.
This can clearly lead to unintended behavior, such as verifying
commit-graphs that aren't in a repository's own object store (or one of
its alternates), or causing a typo to mask a legitimate commit-graph
verification failure. Make this error non-silent by 'die()'-ing when the
given '--object-dir' does not match any known alternate object store.
[1]: In my testing, for example, I can get one side of the commit-graph
code to fill object_dir with "./objects" and the other with just
"objects".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --[no-]progress to git commit-graph write and verify.
The progress feature was introduced in 7b0f229
("commit-graph write: add progress output", 2018-09-17) but
the ability to opt-out was overlooked.
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The file processed by `git commit-graph` is referred to as the
"commit-graph file", also with a dash. We have a few references to the
"commit graph file", though, without the dash. These occur in
git-commit-graph.txt as well as in Doc/technical/commit-graph.txt. Fix
them.
Do not change the references to the "commit graph" (without "... file")
as a data structure.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This document sometimes refers to the "commit-graph file" as just "the
graph file". This saves a couple of words here and there at the risk of
confusion. In particular, the documentation for `git commit-graph read`
appears to suggest that there are indeed different types of graph files.
Let's just write out the full name everywhere.
The full name, by the way, is not the dash-less "commit graph file".
Use the dashed form. (The next commit will fix the remaining few
instances of the "commit graph file" in this document.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we're here, fix an instance of "folder" to be "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of bullet items which span multiple lines, and where we
have prefixed each line with a `*`. (This might be the result of a text
editor trying to help.) This results in each line being typeset as a
separate bullet item. Drop the extra `*`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing commit-graph files, it can be convenient to ask for all
reachable commits (starting at the ref set) in the resulting file. This
is particularly helpful when writing to stdin is complicated, such as a
future integration with 'git gc'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the commit-graph file becomes corrupt, we need a way to verify
that its contents match the object database. In the manner of
'git fsck' we will implement a 'git commit-graph verify' subcommand
to report all issues with the file.
Add the 'verify' subcommand to the 'commit-graph' builtin and its
documentation. The subcommand is currently a no-op except for
loading the commit-graph into memory, which may trigger run-time
errors that would be caught by normal use. Add a simple test that
ensures the command returns a zero error code.
If no commit-graph file exists, this is an acceptable state. Do
not report any errors.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-commit-graph to add all commits from the existing
commit-graph file to the file about to be written. This should be
used when adding new commits without performing garbage collection.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-commit-graph to read commits from stdin when the
--stdin-commits flag is specified. Commits reachable from these
commits are added to the graph. This is a much faster way to construct
the graph than inspecting all packed objects, but is restricted to
known tips.
For the Linux repository, 700,000+ commits were added to the graph
file starting from 'master' in 7-9 seconds, depending on the number
of packfiles in the repo (1, 24, or 120).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-commit-graph to inspect the objects only in a certain list
of pack-indexes within the given pack directory. This allows updating
the commit graph iteratively.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-commit-graph to read commit graph files and summarize their contents.
Use the read subcommand to verify the contents of a commit graph file in the
tests.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-commit-graph to write graph files. Create new test script to verify
this command succeeds without failure.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git the 'commit-graph' builtin that will be used for writing and
reading packed graph files. The current implementation is mostly
empty, except for an '--object-dir' option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Taylor Blau
Junio C Hamano
Derrick Stolee
Martin Ågren
Garima Singh