summaryrefslogtreecommitdiff
path: root/Documentation/git-clean.txt
AgeCommit message (Collapse)AuthorFilesLines
2015-03-06Merge branch 'mr/doc-clean-f-f'Libravatar Junio C Hamano1-2/+6
Documentation update. * mr/doc-clean-f-f: Documentation/git-clean.txt: document that -f may need to be given twice
2015-02-26Documentation/git-clean.txt: document that -f may need to be given twiceLibravatar Mikko Rapeli1-2/+6
This is needed in build automation where the tree really needs to be reset to known state. Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-11-04Documentation: typofixesLibravatar Thomas Ackermann1-1/+1
In addition to fixing trivial and obvious typos, be careful about the following points: - Spell ASCII, URL and CRC in ALL CAPS; - Spell Linux as Capitalized; - Do not omit periods in "i.e." and "e.g.". Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-24Documentation/git-clean: fix description for rangeLibravatar Jiang Xin1-1/+1
The descriptions of "select by numbers" section for interactive git-clean are borrowed from git-add, and one sentence should be replaced. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26git-clean: add documentation for interactive git-cleanLibravatar Jiang Xin1-2/+63
Add new section "Interactive mode" for documentation of interactive git-clean. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-26git-clean: add support for -i/--interactiveLibravatar Jiang Xin1-2/+8
Show what would be done and the user must confirm before actually cleaning. Would remove ... Would remove ... Would remove ... Remove [y/n]? Press "y" to start cleaning, and press "n" if you want to abort. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-01Documentation: the name of the system is 'Git', not 'git'Libravatar Thomas Ackermann1-4/+4
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-18Doc clean: add See Also linkLibravatar Philip Oakley1-0/+4
'git clean' is controlled by gitignore. Provide See Also link for it. Use of core.excludesfile is implied. Signed-off-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-28Documentation: clarify "git clean -e <pattern>"Libravatar Junio C Hamano1-4/+6
The current explanation of -e can be misread as allowing the user to say I know 'git clean -XYZ' (substitute -XYZ with any option and/or parameter) will remove paths A, B, and C, and I want them all removed except for paths matching this pattern by adding '-e C' to the same command line, i.e. 'git clean -e C -XYZ'. But that is not what this option does. It augments the set of ignore rules from the command line, just like the same "-e <pattern>" argument does with the "ls-files" command (the user could probably pass "-e \!C" to tell the command to clean everything the command would normally remove, except for C). Also error out when both -x and -e are given with an explanation of what -e means---it is a symptom of misunderstanding what -e does. It also fixes small style nit in the parameter to add_exclude() call. The current code only works because EXC_CMDL happens to be defined as 0. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11doc: drop author/documentation sections from most pagesLibravatar Jeff King1-6/+0
The point of these sections is generally to: 1. Give credit where it is due. 2. Give the reader an idea of where to ask questions or file bug reports. But they don't do a good job of either case. For (1), they are out of date and incomplete. A much more accurate answer can be gotten through shortlog or blame. For (2), the correct contact point is generally git@vger, and even if you wanted to cc the contact point, the out-of-date and incomplete fields mean you're likely sending to somebody useless. So let's drop the fields entirely from all manpages except git(1) itself. We already point people to the mailing list for bug reports there, and we can update the Authors section to give credit to the major contributors and point to shortlog and blame for more information. Each page has a "This is part of git" footer, so people can follow that to the main git manpage.
2010-07-20Add -e/--exclude to git-clean.Libravatar Jared Hance1-1/+7
With the -e/--exclude option for git-clean, a user can specify files that they haven't yet told git about, but either need for a short amount of time or plan to tell git about them later. This allows one to still use git-clean while these files are around without losing data. Signed-off-by: Jared Hance <jaredhance@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-04git-clean: fix the description of the default behaviorLibravatar Michael J Gruber1-2/+2
Currently, when called without -n and -f, git clean issues fatal: clean.requireForce not set and -n or -f not given; refusing to clean which leaves the user wondering why force is required when requireForce is not set. Looking up in git-clean(1) does not help because its description is wrong. Change it so that git clean issues fatal: clean.requireForce defaults to true and -n or -f not given; refusing to clean in this situation (and "...set to true..." when it is set) which makes it clearer that an unset config means true here, and adjust the documentation. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Documentation: spell 'git cmd' without dash throughoutLibravatar Thomas Rast1-2/+2
The documentation was quite inconsistent when spelling 'git cmd' if it only refers to the program, not to some specific invocation syntax: both 'git-cmd' and 'git cmd' spellings exist. The current trend goes towards dashless forms, and there is precedent in 647ac70 (git-svn.txt: stop using dash-form of commands., 2009-07-07) to actively eliminate the dashed variants. Replace 'git-cmd' with 'git cmd' throughout, except where git-shell, git-cvsserver, git-upload-pack, git-receive-pack, and git-upload-archive are concerned, because those really live in the $PATH.
2009-08-29UI consistency: allow --force for where -f means forceLibravatar René Scharfe1-0/+1
git branch, checkout, clean, mv and tag all have an option -f to override certain checks. This patch makes them accept the long option --force as a synonym. While we're at it, document that checkout support --quiet as synonym for its short option -q. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29clean: require double -f options to nuke nested git repository and work treeLibravatar Junio C Hamano1-0/+3
When you have an embedded git work tree in your work tree (be it an orphaned submodule, or an independent checkout of an unrelated project), "git clean -d -f" blindly descended into it and removed everything. This is rarely what the user wants. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-06git-clean doc: the command only affects paths under $(cwd)Libravatar Junio C Hamano1-2/+2
Fredrik Skolmli and Thomas Rast noticed that it was left unstated that "git clean" ran from a subdirectory will not affect anything outside it, with or without path limiters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-25Documentation: git-clean: make description more readableLibravatar Wesley J. Landaker1-5/+8
The existing text is a little bit awkward. This rewrites the description section to be more readable and friendly. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-25Documentation: git-clean: fix minor grammatical errorsLibravatar Wesley J. Landaker1-3/+3
There were a few minor grammatical errors that made this paragraph hard to read. This patch fixes the errors in a very minimal manner. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30Make the DESCRIPTION match <x>... items in the SYNOPSISLibravatar Abhijit Menon-Sen1-3/+3
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-05manpages: italicize git command names (which were in teletype font)Libravatar Jonathan Nieder1-2/+2
The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation formatting and cleanupLibravatar Jonathan Nieder1-2/+2
Following what appears to be the predominant style, format names of commands and commandlines both as `teletype text`. While we're at it, add articles ("a" and "the") in some places, italicize the name of the command in the manual page synopsis line, and add a comma or two where it seems appropriate. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-01Documentation: be consistent about "git-" versus "git "Libravatar Jonathan Nieder1-1/+1
Since the git-* commands are not installed in $(bindir), using "git-command <parameters>" in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08Docs: add some long/short optionsLibravatar Stephan Beyer1-0/+2
Namely: git-clean.txt: --dry-run --quiet git-count-objects.txt: --verbose git-quiltimport.txt: -n git-remote.txt: -v --verbose Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06documentation: move git(7) to git(1)Libravatar Christian Couder1-1/+1
As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-06Documentation: rename gitlink macro to linkgitLibravatar Dan McGee1-2/+2
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case gitlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-05-07Fix minor documentation errorsLibravatar Michael Spang1-1/+1
- git-ls-files.txt: typo in description of --ignored - git-clean.txt: s/forceRequire/requireForce/ Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-23Add clean.requireForce option, and add -f option to git-clean to override itLibravatar Josh Triplett1-1/+5
Add a new configuration option clean.requireForce. If set, git-clean will refuse to run, unless forced with the new -f option, or not acting due to -n. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-08Teach git-clean optional <paths>... parameters.Libravatar Junio C Hamano1-1/+4
When optional paths arguments are given, git-clean passes them to underlying git-ls-files; with this, you can say: git clean 'temp-*' to clean only the garbage files whose names begin with 'temp-'. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Pavel Roskin <proski@gnu.org>
2006-04-05Add git-clean commandLibravatar Pavel Roskin1-0/+50
This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>